Your message dated Mon, 14 Nov 2011 14:05:40 +0000
with message-id <1321279540.2885.9.camel@deadeye>
and subject line Re: Bug#648191: linux-image-2.6.32-5-686: latest squeeze
kernel doesn't boot on Dell Optiplex GX270 if hyperthreading enabled
has caused the Debian Bug report #648191,
regarding linux-image-2.6.32-5-686: latest squeeze kernel doesn't boot on Dell
Optiplex GX270 if hyperthreading enabled
to be marked as done.
This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.
(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact ow...@bugs.debian.org
immediately.)
--
648191: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=648191
Debian Bug Tracking System
Contact ow...@bugs.debian.org with problems
--- Begin Message ---
Package: linux-2.6
Version: 2.6.32-38
Severity: normal
Previous versions of this package, for example 2.6.32-31, had no problem
booting on this hardware.
Version 2.6.32-38 spontaneously reboots during the boot process unless
hyperthreading is disabled. (Says something about activating 2nd CPU.
I'll try and get a serial console hooked up tomorrow to get the exact
message).
-- Package-specific info:
** Version:
Linux version 2.6.32-5-686 (Debian 2.6.32-38) (b...@decadent.org.uk) (gcc
version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Mon Oct 3 04:15:24 UTC 2011
** Command line:
BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-686
root=UUID=08954096-775f-4ba9-9095-1abf28a22da6 ro quiet
** Not tainted
** Kernel log:
[ 7347.542308] [<f7ce02d7>] ? xs_sendpages+0x6e/0x183 [sunrpc]
[ 7347.542320] [<f7ce1e58>] ? rpc_wait_bit_killable+0x24/0x27 [sunrpc]
[ 7347.542326] [<c126dbc1>] ? __wait_on_bit+0x33/0x58
[ 7347.542338] [<f7ce1e34>] ? rpc_wait_bit_killable+0x0/0x27 [sunrpc]
[ 7347.542343] [<c126dc9b>] ? out_of_line_wait_on_bit+0xb5/0xbd
[ 7347.542355] [<f7ce1e34>] ? rpc_wait_bit_killable+0x0/0x27 [sunrpc]
[ 7347.542360] [<c104405b>] ? wake_bit_function+0x0/0x3c
[ 7347.542370] [<f7ce23d1>] ? __rpc_execute+0xc8/0x1e8 [sunrpc]
[ 7347.542379] [<f7cdd288>] ? rpc_run_task+0x43/0x48 [sunrpc]
[ 7347.542387] [<f7cdd392>] ? rpc_call_sync+0x3f/0x5a [sunrpc]
[ 7347.542401] [<f8155743>] ? nfs4_proc_access+0x13f/0x1ae [nfs]
[ 7347.542407] [<c11cf651>] ? sock_def_readable+0x34/0x5e
[ 7347.542411] [<c123081b>] ? unix_stream_sendmsg+0x238/0x2c4
[ 7347.542416] [<c11ccc49>] ? __sock_sendmsg+0x43/0x4a
[ 7347.542426] [<f8142fca>] ? nfs_do_access+0x14e/0x34b [nfs]
[ 7347.542438] [<f7ce31e4>] ? rpcauth_lookupcred+0x60/0x83 [sunrpc]
[ 7347.542448] [<f8143288>] ? nfs_permission+0xc1/0x14f [nfs]
[ 7347.542453] [<c10ba2ce>] ? __link_path_walk+0x5d/0x5de
[ 7347.542457] [<c10baa05>] ? path_walk+0x4f/0xa3
[ 7347.542461] [<c10bbb81>] ? do_path_lookup+0x1f/0x69
[ 7347.542465] [<c10bcce9>] ? user_path_at+0x37/0x5f
[ 7347.542470] [<c10b6467>] ? vfs_fstatat+0x2a/0x50
[ 7347.542474] [<c10b6549>] ? vfs_stat+0x10/0x12
[ 7347.542477] [<c10b655a>] ? sys_stat64+0xf/0x23
[ 7347.542482] [<c10c1453>] ? dput+0x22/0x105
[ 7347.542486] [<c10c5143>] ? mntput_no_expire+0x17/0xb6
[ 7347.542491] [<c126ecd0>] ? do_device_not_available+0x0/0x4d
[ 7347.542495] [<c126ed0d>] ? do_device_not_available+0x3d/0x4d
[ 7347.542499] [<c10b1b70>] ? sys_close+0x5a/0x8d
[ 7347.542503] [<c10030fb>] ? sysenter_do_call+0x12/0x28
[ 7347.542506] flush-0:23 S f5b91ef0 0 18941 2 0x00000000
[ 7347.542511] f4c99540 00000046 f58714d8 f5b91ef0 f5b91ef0 c141d100 c141d100
f5b91f78
[ 7347.542519] f4c996fc c2808100 00000000 b7ef9b6a 000006ae c14534e0 c14534e0
c103b0f4
[ 7347.542526] f5b91f5c f4c996fc 00000296 c14534e0 c103b24e 00000000 001ae730
00000296
[ 7347.542534] Call Trace:
[ 7347.542538] [<c103b0f4>] ? lock_timer_base+0x19/0x35
[ 7347.542542] [<c103b24e>] ? __mod_timer+0x13e/0x148
[ 7347.542548] [<c126da01>] ? schedule_timeout+0x80/0xb0
[ 7347.542552] [<c103b3bb>] ? process_timeout+0x0/0x5
[ 7347.542556] [<c10ca007>] ? bdi_writeback_task+0x64/0x89
[ 7347.542560] [<c1098655>] ? bdi_start_fn+0x59/0xa4
[ 7347.542564] [<c10985fc>] ? bdi_start_fn+0x0/0xa4
[ 7347.542568] [<c1043dfc>] ? kthread+0x61/0x66
[ 7347.542572] [<c1043d9b>] ? kthread+0x0/0x66
[ 7347.542576] [<c1003d47>] ? kernel_thread_helper+0x7/0x10
[ 7347.542580] Sched Debug Version: v0.09, 2.6.32-5-686 #1
[ 7347.542584] now at 7347542.584471 msecs
[ 7347.542586] .jiffies : 1761885
[ 7347.542590] .sysctl_sched_latency : 5.000000
[ 7347.542593] .sysctl_sched_min_granularity : 1.000000
[ 7347.542596] .sysctl_sched_wakeup_granularity : 1.000000
[ 7347.542598] .sysctl_sched_child_runs_first : 0.000000
[ 7347.542601] .sysctl_sched_features : 32611451
[ 7347.542605]
[ 7347.542606] cpu#0, 2593.870 MHz
[ 7347.542608] .nr_running : 1
[ 7347.542611] .load : 1024
[ 7347.542613] .nr_switches : 3152254
[ 7347.542616] .nr_load_updates : 299215
[ 7347.542618] .nr_uninterruptible : 2
[ 7347.542621] .next_balance : 1.757028
[ 7347.542624] .curr->pid : 18750
[ 7347.542627] .clock : 7347540.003641
[ 7347.542629] .cpu_load[0] : 1024
[ 7347.542632] .cpu_load[1] : 1024
[ 7347.542634] .cpu_load[2] : 1024
[ 7347.542636] .cpu_load[3] : 1024
[ 7347.542639] .cpu_load[4] : 1024
[ 7347.542642]
[ 7347.542643] cfs_rq[0]:/
[ 7347.542646] .exec_clock : 0.000000
[ 7347.542649] .MIN_vruntime : 0.000001
[ 7347.542652] .min_vruntime : 1257815.162715
[ 7347.542655] .max_vruntime : 0.000001
[ 7347.542657] .spread : 0.000000
[ 7347.542660] .spread0 : 0.000000
[ 7347.542663] .nr_running : 1
[ 7347.542665] .load : 1024
[ 7347.542667] .nr_spread_over : 0
[ 7347.542670] .shares : 0
[ 7347.542672]
[ 7347.542673] rt_rq[0]:
[ 7347.542676] .rt_nr_running : 0
[ 7347.542678] .rt_throttled : 0
[ 7347.542680] .rt_time : 0.000000
[ 7347.542683] .rt_runtime : 950.000000
[ 7347.542686]
[ 7347.542687] runnable tasks:
[ 7347.542688] task PID tree-key switches prio
exec-runtime sum-exec sum-sleep
[ 7347.542690]
----------------------------------------------------------------------------------------------------------
[ 7347.542735] R pm-suspend 18750 1257815.162715 103 120
0 0 0.000000 0.000000
0.000000 /
[ 7347.542745]
[ 7347.542784] nm-applet
[ 7347.542798] dbus-daemon-lau
[ 7347.542802]
[ 7347.542803] Restarting tasks ... done.
[ 7347.820400] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 7347.824385] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control:
RX
[ 7347.824789] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 7358.724009] eth0: no IPv6 routers present
** Model information
not available
** Loaded modules:
Module Size Used by
des_generic 15027 16
cbc 2047 16
autofs4 16667 2
speedstep_lib 2468 0
cpufreq_conservative 4018 0
cpufreq_powersave 602 0
cpufreq_stats 1997 0
cpufreq_userspace 1480 0
ppdev 4058 0
lp 5570 0
sco 5885 2
bridge 33031 0
stp 996 1 bridge
bnep 7452 2
l2cap 21721 3 bnep
crc16 1027 1 l2cap
bluetooth 36319 5 sco,bnep,l2cap
rfkill 10264 3 bluetooth
binfmt_misc 4907 1
fuse 44268 1
rpcsec_gss_krb5 7477 9
nfsd 193919 2
exportfs 2618 1 nfsd
nfs 207234 2
lockd 49449 2 nfsd,nfs
fscache 24662 1 nfs
nfs_acl 1695 2 nfsd,nfs
auth_rpcgss 25296 4 rpcsec_gss_krb5,nfsd,nfs
sunrpc 134848 15
rpcsec_gss_krb5,nfsd,nfs,lockd,nfs_acl,auth_rpcgss
loop 9769 0
snd_hda_codec_atihdmi 1687 1
snd_intel8x0 19595 0
snd_hda_intel 16823 0
snd_hda_codec 46002 2 snd_hda_codec_atihdmi,snd_hda_intel
snd_ac97_codec 79200 1 snd_intel8x0
snd_hwdep 4054 1 snd_hda_codec
ac97_bus 710 1 snd_ac97_codec
snd_pcm 47226 4
snd_intel8x0,snd_hda_intel,snd_hda_codec,snd_ac97_codec
radeon 511948 3
ttm 33502 1 radeon
snd_seq 35463 0
drm_kms_helper 18569 1 radeon
snd_timer 12270 2 snd_pcm,snd_seq
drm 111992 5 radeon,ttm,drm_kms_helper
snd_seq_device 3673 1 snd_seq
i2c_i801 6462 0
i2c_algo_bit 3497 1 radeon
snd 34423 9
snd_intel8x0,snd_hda_intel,snd_hda_codec,snd_ac97_codec,snd_hwdep,snd_pcm,snd_seq,snd_timer,snd_seq_device
parport_pc 15799 1
soundcore 3450 1 snd
shpchp 21220 0
dcdbas 3892 0
parport 22554 3 ppdev,lp,parport_pc
snd_page_alloc 5045 3 snd_intel8x0,snd_hda_intel,snd_pcm
rng_core 2178 0
pcspkr 1207 0
i2c_core 12787 5 radeon,drm_kms_helper,drm,i2c_i801,i2c_algo_bit
pci_hotplug 18545 1 shpchp
processor 26327 0
button 3598 0
evdev 5609 7
usbhid 28008 0
hid 50909 1 usbhid
ext3 94396 1
jbd 32317 1 ext3
mbcache 3762 1 ext3
sg 19937 0
sr_mod 10770 0
cdrom 26487 1 sr_mod
sd_mod 26005 3
crc_t10dif 1012 1 sd_mod
usb_storage 30905 0
ata_generic 2247 0
uhci_hcd 16057 0
ata_piix 17736 2
thermal 9206 0
e1000 77317 0
ehci_hcd 28693 0
libata 115869 2 ata_generic,ata_piix
scsi_mod 104853 5 sg,sr_mod,sd_mod,usb_storage,libata
usbcore 98969 5 usbhid,usb_storage,uhci_hcd,ehci_hcd
nls_base 4541 1 usbcore
thermal_sys 9378 2 processor,thermal
** Network interface configuration:
auto lo
iface lo inet loopback
allow-hotplug eth0
** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP
qlen 1000
link/ether 00:12:3f:98:4d:eb brd ff:ff:ff:ff:ff:ff
inet 192.168.6.103/24 brd 192.168.6.255 scope global eth0
inet6 fe80::212:3fff:fe98:4deb/64 scope link
valid_lft forever preferred_lft forever
3: pan0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN
link/ether a2:9d:06:7c:b6:f9 brd ff:ff:ff:ff:ff:ff
*** Device statistics:
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes
packets errs drop fifo colls carrier compressed
lo: 13252 188 0 0 0 0 0 0 13252
188 0 0 0 0 0 0
eth0:234821432 269905 0 324 0 0 0 10157 710126591
219501 0 0 0 0 0 0
pan0: 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0
*** Protocol statistics:
Ip:
257963 total packets received
8 with invalid addresses
0 forwarded
0 incoming packets discarded
257955 incoming packets delivered
179187 requests sent out
140 dropped because of missing route
Icmp:
0 ICMP messages received
0 input ICMP message failed.
ICMP input histogram:
0 ICMP messages sent
0 ICMP messages failed
ICMP output histogram:
Tcp:
217 active connections openings
18 passive connection openings
6 failed connection attempts
45 connection resets received
8 connections established
251377 segments received
178365 segments send out
66 segments retransmited
0 bad segments received.
71 resets sent
Udp:
5689 packets received
0 packets to unknown port received.
0 packet receive errors
692 packets sent
UdpLite:
TcpExt:
59 TCP sockets finished time wait in fast timer
1237 delayed acks sent
Quick ack mode was activated 26 times
31 packets directly queued to recvmsg prequeue.
30 bytes directly received in process context from prequeue
210653 packet headers predicted
850 acknowledgments not containing data payload received
109528 predicted acknowledgments
2 congestion windows recovered without slow start after partial ack
10 other TCP timeouts
26 DSACKs sent for old packets
4 connections reset due to unexpected data
45 connections reset due to early user close
8 connections aborted due to timeout
TCPSackShiftFallback: 5
IpExt:
InMcastPkts: 5017
OutMcastPkts: 100
InBcastPkts: 894
InOctets: 229239398
OutOctets: 113301360
InMcastOctets: 1406080
OutMcastOctets: 7594
InBcastOctets: 247229
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 82865G/PE/P DRAM
Controller/Host-Hub Interface [8086:2570] (rev 02)
Subsystem: Dell Device [1028:0151]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at d0000000 (32-bit, prefetchable) [size=128M]
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
00:01.0 PCI bridge [0604]: Intel Corporation 82865G/PE/P PCI to AGP Controller
[8086:2571] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 64
Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fe900000-feafffff
Prefetchable memory behind bridge: d8000000-efffffff
Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
00:06.0 System peripheral [0880]: Intel Corporation 82865G/PE/P Processor to
I/O Memory Interface [8086:2576] (rev 02)
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Region 0: Memory at fecf0000 (32-bit, non-prefetchable) [size=4K]
00:1d.0 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB
UHCI Controller #1 [8086:24d2] (rev 02) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:0151]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at ff80 [size=32]
Kernel driver in use: uhci_hcd
00:1d.1 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB
UHCI Controller #2 [8086:24d4] (rev 02) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:0151]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at ff60 [size=32]
Kernel driver in use: uhci_hcd
00:1d.2 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB
UHCI Controller #3 [8086:24d7] (rev 02) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:0151]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at ff40 [size=32]
Kernel driver in use: uhci_hcd
00:1d.3 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB
UHCI Controller #4 [8086:24de] (rev 02) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:0151]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at ff20 [size=32]
Kernel driver in use: uhci_hcd
00:1d.7 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB2
EHCI Controller [8086:24dd] (rev 02) (prog-if 20 [EHCI])
Subsystem: Dell Device [1028:0151]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 23
Region 0: Memory at ffa80800 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev
c2) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=32
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: fe800000-fe8fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
00:1f.0 ISA bridge [0601]: Intel Corporation 82801EB/ER (ICH5/ICH5R) LPC
Interface Bridge [8086:24d0] (rev 02)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:1f.1 IDE interface [0101]: Intel Corporation 82801EB/ER (ICH5/ICH5R) IDE
Controller [8086:24db] (rev 02) (prog-if 8a [Master SecP PriP])
Subsystem: Dell Device [1028:0151]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 18
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at ffa0 [size=16]
Region 5: Memory at febffc00 (32-bit, non-prefetchable) [size=1K]
Kernel driver in use: ata_piix
00:1f.2 IDE interface [0101]: Intel Corporation 82801EB (ICH5) SATA Controller
[8086:24d1] (rev 02) (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: Dell Device [1028:0151]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 18
Region 0: I/O ports at fe00 [size=8]
Region 1: I/O ports at fe10 [size=4]
Region 2: I/O ports at fe20 [size=8]
Region 3: I/O ports at fe30 [size=4]
Region 4: I/O ports at fea0 [size=16]
Kernel driver in use: ata_piix
00:1f.3 SMBus [0c05]: Intel Corporation 82801EB/ER (ICH5/ICH5R) SMBus
Controller [8086:24d3] (rev 02)
Subsystem: Dell Device [1028:0151]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 17
Region 4: I/O ports at eda0 [size=32]
Kernel driver in use: i801_smbus
00:1f.5 Multimedia audio controller [0401]: Intel Corporation 82801EB/ER
(ICH5/ICH5R) AC'97 Audio Controller [8086:24d5] (rev 02)
Subsystem: Dell Device [1028:0151]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 17
Region 0: I/O ports at ee00 [size=256]
Region 1: I/O ports at edc0 [size=64]
Region 2: Memory at febffa00 (32-bit, non-prefetchable) [size=512]
Region 3: Memory at febff900 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: Intel ICH
01:00.0 VGA compatible controller [0300]: ATI Technologies Inc RV620 LE AGP
[Radeon HD 3450] [1002:95c6] (prog-if 00 [VGA controller])
Subsystem: ASUSTeK Computer Inc. Device [1043:0028]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (2000ns min), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at e0000000 (32-bit, prefetchable) [size=256M]
Region 1: I/O ports at de00 [size=256]
Region 2: Memory at fe9f0000 (32-bit, non-prefetchable) [size=64K]
Expansion ROM at fea00000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: radeon
01:00.1 Audio device [0403]: ATI Technologies Inc RV620 Audio device [Radeon HD
34xx Series] [1002:aa28]
Subsystem: ASUSTeK Computer Inc. Device [1043:aa28]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (2000ns min), Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at fe9ec000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
02:0c.0 Ethernet controller [0200]: Intel Corporation 82540EM Gigabit Ethernet
Controller [8086:100e] (rev 02)
Subsystem: Dell Optiplex GX270 [1028:0151]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (63750ns min), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at fe8e0000 (32-bit, non-prefetchable) [size=128K]
Region 2: I/O ports at cf40 [size=64]
Capabilities: <access denied>
Kernel driver in use: e1000
** USB devices:
Bus 005 Device 002: ID 045e:00cb Microsoft Corp. Basic Optical Mouse v2.0
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 004: ID 0471:0854 Philips (or NXP)
Bus 001 Device 003: ID 0424:2514 Standard Microsystems Corp. USB 2.0 Hub
Bus 001 Device 002: ID 04b4:6560 Cypress Semiconductor Corp. CY7C65640 USB-2.0
"TetraHub"
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: 6.0.3
APT prefers stable-updates
APT policy: (500, 'stable-updates'), (500, 'stable')
Architecture: i386 (i686)
Kernel: Linux 2.6.32-5-686 (SMP w/1 CPU core)
Locale: LANG=en_US.utf8, LC_CTYPE=en_US.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-2.6.32-5-686 depends on:
ii debconf [debconf-2.0] 1.5.36.1 Debian configuration management sy
ii initramfs-tools [linux-initra 0.98.8 tools for generating an initramfs
ii linux-base 2.6.32-38 Linux image base package
ii module-init-tools 3.12-1 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.32-5-686 recommends:
ii firmware-linux-free 2.6.32-38 Binary firmware for various driver
ii libc6-i686 2.11.2-10 Embedded GNU C Library: Shared lib
Versions of packages linux-image-2.6.32-5-686 suggests:
pn grub | lilo <none> (no description available)
pn linux-doc-2.6.32 <none> (no description available)
Versions of packages linux-image-2.6.32-5-686 is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
pn firmware-iwlwifi <none> (no description available)
ii firmware-linux 0.28+squeeze1 Binary firmware for various driver
ii firmware-linux-nonfree 0.28+squeeze1 Binary firmware for various driver
pn firmware-qlogic <none> (no description available)
pn firmware-ralink <none> (no description available)
pn xen-hypervisor <none> (no description available)
-- debconf information:
linux-image-2.6.32-5-686/prerm/removing-running-kernel-2.6.32-5-686: true
linux-image-2.6.32-5-686/postinst/depmod-error-initrd-2.6.32-5-686: false
linux-image-2.6.32-5-686/postinst/ignoring-do-bootloader-2.6.32-5-686:
linux-image-2.6.32-5-686/postinst/missing-firmware-2.6.32-5-686:
--- End Message ---
--- Begin Message ---
On Mon, 2011-11-14 at 11:08 +0100, John Hughes wrote:
> On 14/11/11 06:58, Ben Hutchings wrote:
> >
> > Could you test an intermediate version, say, 2.6.32-34squeeze1? Earlier
> > versions are available at
> > <http://snapshot.debian.org/binary/linux-image-2.6.32-5-686/>.
> >
>
> I'm really sorry but I am unable to reproduce this bug.
>
> I tried 2.6.32-34squeeze1, it worked
> 2.6.32-36 worked
> 2.6.32-37 worked
>
> Just to make sure I tried the version that was giving me problems...
> 2.6.32-38 worked.
>
> WTF!
>
> I must have made some unimaginably stupid mistake, but I can't work out
> what at the moment.
It's probably not your mistake but some sort of bug in the BIOS that
only manifests occasionally. I'll close this now, but feel free to
follow-up if you see the bug again.
Ben.
--
Ben Hutchings
The world is coming to an end. Please log off.
signature.asc
Description: This is a digitally signed message part
--- End Message ---
