On Sun, Sep 18, 2011 at 01:55:50PM +0200, Bart Hartgers wrote: > 2011/9/18 ael <law_ence....@ntlworld.com>: > > On Fri, Sep 16, 2011 at 01:17:51PM +0200, Bart Hartgers wrote: > >> >> >> > [Previous messages are logged at <http://bugs.debian.org/640391>. > > > > I have now tested properly with debug=1. Unfortunately, the problem > > remains, and I can't see anything new in the messages. > > > > # rmmod ark3116; modprobe ark3116 debug=1 > > # uname -a > > Linux elf 3.0.0-1-686-pae #1 SMP Sat Aug 27 16:41:03 UTC 2011 i686 GNU/Linux > > > > Sep 18 08:56:47 elf kernel: [ 357.253199] usb 2-1: ark3116 using RS232 mode > > Sep 18 08:56:47 elf kernel: [ 357.253590] usb 2-1: ark3116 converter now > > attached to ttyUSB0 > > Sep 18 08:56:47 elf mtp-probe: bus: 2, device: 2 was not an MTP device > > Sep 18 08:56:47 elf kernel: [ 357.544206] usb 2-1: ark3116: don't know how > > to do software flow control > > Sep 18 08:56:47 elf kernel: [ 357.557194] usb 2-1: ark3116: don't know how > > to do software flow control > > Sep 18 08:56:47 elf kernel: [ 357.567194] usb 2-1: ark3116: don't know how > > to do software flow control > > Sep 18 08:56:47 elf kernel: [ 357.674193] usb 2-1: ark3116: don't know how > > to do software flow control > > Sep 18 08:57:00 elf kernel: [ 370.017895] usb 2-1: ark3116: don't know how > > to do software flow control > > Sep 18 08:57:21 elf kernel: [ 391.615318] usb 2-1: ark3116: don't know how > > to do software flow control > > Strange. The rmmod and modprobe shoudl set the debug flag, so I would > expect some debug messages around the 'software flow control' stuff. > Did you check the output of 'dmesg'? (The prefixes suggest these are > coming through syslogd.) Perhaps the debug messages end up in a > different log or something?
Ooops. I think you are right. I didn't check dmesg directly believing that it all appeared in /var/log/messages. But now I see /var/log/debug.. ------------------------------------------------------------------------ Sep 18 08:56:47 elf kernel: [ 357.542178] /build/buildd-linux-2.6_3.0.0-3-i386-G7H4XL/linux-2.6-3.0.0/debian/build/source_i386_none/drivers/usb/serial/ark3116.c: ark3116_set_termios - setting bps to 9600 Sep 18 08:56:47 elf kernel: [ 357.542195] /build/buildd-linux-2.6_3.0.0-3-i386-G7H4XL/linux-2.6-3.0.0/debian/build/source_i386_none/drivers/usb/serial/ark3116.c: ark3116_set_termios - setting hcr:0x00,lcr:0x13,quot:313 Sep 18 08:56:47 elf kernel: [ 357.550315] /build/buildd-linux-2.6_3.0.0-3-i386-G7H4XL/linux-2.6-3.0.0/debian/build/source_i386_none/drivers/usb/serial/ark3116.c: ark3116_set_termios - setting bps to 57600 Sep 18 08:56:47 elf kernel: [ 357.550339] /build/buildd-linux-2.6_3.0.0-3-i386-G7H4XL/linux-2.6-3.0.0/debian/build/source_i386_none/drivers/usb/serial/ark3116.c: ark3116_set_termios - setting hcr:0x00,lcr:0x13,quot:52 Sep 18 08:56:47 elf kernel: [ 357.557438] /build/buildd-linux-2.6_3.0.0-3-i386-G7H4XL/linux-2.6-3.0.0/debian/build/source_i386_none/drivers/usb/serial/ark3116.c: ark3116_set_termios - setting bps to 0 Sep 18 08:56:47 elf kernel: [ 357.557460] /build/buildd-linux-2.6_3.0.0-3-i386-G7H4XL/linux-2.6-3.0.0/debian/build/source_i386_none/drivers/usb/serial/ark3116.c: ark3116_set_termios - setting hcr:0x00,lcr:0x13,quot:313 Sep 18 08:56:47 elf kernel: [ 357.667612] /build/buildd-linux-2.6_3.0.0-3-i386-G7H4XL/linux-2.6-3.0.0/debian/build/source_i386_none/drivers/usb/serial/ark3116.c: ark3116_set_termios - setting bps to 57600 Sep 18 08:56:47 elf kernel: [ 357.667636] /build/buildd-linux-2.6_3.0.0-3-i386-G7H4XL/linux-2.6-3.0.0/debian/build/source_i386_none/drivers/usb/serial/ark3116.c: ark3116_set_termios - setting hcr:0x00,lcr:0x13,quot:52 Sep 18 08:57:00 elf kernel: [ 370.008846] /build/buildd-linux-2.6_3.0.0-3-i386-G7H4XL/linux-2.6-3.0.0/debian/build/source_i386_none/drivers/usb/serial/ark3116.c: ark3116_read_int_callback - urb shutting down with status: -2 Sep 18 08:57:00 elf kernel: [ 370.009808] /build/buildd-linux-2.6_3.0.0-3-i386-G7H4XL/linux-2.6-3.0.0/debian/build/source_i386_none/drivers/usb/serial/ark3116.c: ark3116_set_termios - setting bps to 9600 Sep 18 08:57:00 elf kernel: [ 370.009872] /build/buildd-linux-2.6_3.0.0-3-i386-G7H4XL/linux-2.6-3.0.0/debian/build/source_i386_none/drivers/usb/serial/ark3116.c: ark3116_set_termios - setting hcr:0x00,lcr:0x13,quot:313 Sep 18 08:57:00 elf kernel: [ 370.022971] /build/buildd-linux-2.6_3.0.0-3-i386-G7H4XL/linux-2.6-3.0.0/debian/build/source_i386_none/drivers/usb/serial/ark3116.c: ark3116_set_termios - setting bps to 115200 Sep 18 08:57:00 elf kernel: [ 370.022994] /build/buildd-linux-2.6_3.0.0-3-i386-G7H4XL/linux-2.6-3.0.0/debian/build/source_i386_none/drivers/usb/serial/ark3116.c: ark3116_set_termios - setting hcr:0x00,lcr:0x13,quot:26 Sep 18 08:57:06 elf kernel: [ 376.007693] /build/buildd-linux-2.6_3.0.0-3-i386-G7H4XL/linux-2.6-3.0.0/debian/build/source_i386_none/drivers/usb/serial/ark3116.c: ark3116_read_int_callback - urb shutting down with status: -2 Sep 18 08:57:21 elf kernel: [ 391.606016] /build/buildd-linux-2.6_3.0.0-3-i386-G7H4XL/linux-2.6-3.0.0/debian/build/source_i386_none/drivers/usb/serial/ark3116.c: ark3116_set_termios - setting bps to 9600 Sep 18 08:57:21 elf kernel: [ 391.606028] /build/buildd-linux-2.6_3.0.0-3-i386-G7H4XL/linux-2.6-3.0.0/debian/build/source_i386_none/drivers/usb/serial/ark3116.c: ark3116_set_termios - setting hcr:0x00,lcr:0x13,quot:313 Sep 18 08:57:21 elf kernel: [ 391.620413] /build/buildd-linux-2.6_3.0.0-3-i386-G7H4XL/linux-2.6-3.0.0/debian/build/source_i386_none/drivers/usb/serial/ark3116.c: ark3116_set_termios - setting bps to 9600 Sep 18 08:57:21 elf kernel: [ 391.620436] /build/buildd-linux-2.6_3.0.0-3-i386-G7H4XL/linux-2.6-3.0.0/debian/build/source_i386_none/drivers/usb/serial/ark3116.c: ark3116_set_termios - setting hcr:0x00,lcr:0x13,quot:313 Sep 18 08:57:26 elf kernel: [ 395.870180] /build/buildd-linux-2.6_3.0.0-3-i386-G7H4XL/linux-2.6-3.0.0/debian/build/source_i386_none/drivers/usb/serial/ark3116.c: ark3116_read_int_callback - urb shutting down with status: -2 --------------------------------------------------------------------------------- Above was when the converter was plugged in. I will check again with gpsbabel and the garmin again and report. ael -- To UNSUBSCRIBE, email to debian-kernel-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/20110918192422.GA2853@elf.conquest
