Package: linux-2.6
Version: 2.6.32-5
Severity: normal
Hi,
I just reinstall my distribution and change from x86 arch to amd64 arch.
On fist startup, when kde load is finished, a kernel oops is raised:
"
Kernel failure message 1: EDAC amd64: WARNING: ECC is disabled by BIOS.
Module will NOT be loaded. Either Enable ECC in the BIOS, or set
'ecc_enable_override'.
Also, use of the override can cause unknown side effects. amd64_edac: probe
of 0000:00:18.2 failed with error -22 k8temp 0000:00:18.3: Temperature
readouts might be wrong - check erratum #141
input: PC Speaker as /devices/platform/pcspkr/input/input5 parport_pc 00:0a:
reported by Plug and Play ACPI parport0: PC-style at 0x378, irq 7
[PCSPP,TRISTATE,EPP] i2c i2c-0: nForce2 SMBus adapter at 0x1c00 ACPI: I/O
resource nForce2_smbus [0x1c40-0x1c7f] conflicts with ACPI region SM00
[0x1c40-0x1c45]
ACPI: If an ACPI driver is available for this device, you should use it
instead of the native driver nForce2_smbus 0000:00:01.1: Error probing SMB2.
ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 20 HDA Intel 0000:00:06.1:
PCI INT B -> Link[AAZA] -> GSI 20 (level, low) -> IRQ 20 HDA Intel
0000:00:06.1: setting latency timer to 64
input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:06.1/input/input6
Adding 2650684k swap on /dev/sda5. Priority:-1 extents:1 across:2650684k
loop: module loaded EXT4-fs (sda3): mounted filesystem with ordered data
mode alloc irq_desc for 30 on node 0 alloc kstat_irqs on node 0 forcedeth
0000:00:08.0: irq 30 for MSI/MSI-X fuse init (API version 7.13)
powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 5600+
processors (2 cpu cores) (version 2.20.00)
[Firmware Bug]: powernow-k8: No compatible ACPI _PSS objects found.
[Firmware Bug]: powernow-k8: Try again with latest BIOS.
"
I found the same problem on ubuntu bug tracker:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/422536 and it is seem
to be fixed.
I did not notice any visible consequences on the system yet.
Is there a risk of data loss or others serious consequences? (I hesitate to
reconnect and set up a raid1 soft on this system.)
Best regards,
Thomas PIERSON
(I join a kernel log)
-- Package-specific info:
** Version:
Linux version 2.6.32-trunk-amd64 (Debian 2.6.32-5) (b...@decadent.org.uk)
(gcc version 4.3.4 (Debian 4.3.4-6) ) #1 SMP Sun Jan 10 22:40:40 UTC 2010
** Command line:
BOOT_IMAGE=/boot/vmlinuz-2.6.32-trunk-amd64
root=UUID=c1d7fb62-3c1c-4f17-b8fe-7df24a4eb91f ro quiet
** Not tainted
-- System Information:
Debian Release: squeeze/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: amd64 (x86_64)
Kernel: Linux 2.6.32-trunk-amd64 (SMP w/2 CPU cores)
Locale: LANG=fr_FR.UTF-8, LC_CTYPE=fr_FR.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-2.6.32-trunk-amd64 depends on:
ii debconf [debconf-2.0] 1.5.28 Debian configuration management
sy
ii initramfs-tools [linux-initra 0.93.4 tools for generating an
initramfs
ii module-init-tools 3.11-1 tools for managing Linux kernel
mo
Versions of packages linux-image-2.6.32-trunk-amd64 recommends:
pn firmware-linux-free <none> (no description available)
Versions of packages linux-image-2.6.32-trunk-amd64 suggests:
pn grub | lilo <none> (no description available)
pn linux-doc-2.6.32 <none> (no description available)
Versions of packages linux-image-2.6.32-trunk-amd64 is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
pn firmware-iwlwifi <none> (no description available)
pn firmware-linux <none> (no description available)
pn firmware-linux-nonfree <none> (no description available)
pn firmware-qlogic <none> (no description available)
pn firmware-ralink <none> (no description available)
-- debconf information:
linux-image-2.6.32-trunk-amd64/postinst/bootloader-error-2.6.32-trunk-amd64:
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.32-trunk-amd64/postinst/depmod-error-initrd-2.6.32-trunk-amd64:
false
linux-image-2.6.32-trunk-amd64/prerm/removing-running-kernel-2.6.32-trunk-amd64:
true
linux-image-2.6.32-trunk-amd64/postinst/bootloader-test-error-2.6.32-trunk-amd64:
linux-image-2.6.32-trunk-amd64/postinst/missing-firmware-2.6.32-trunk-amd64:
linux-image-2.6.32-trunk-amd64/prerm/would-invalidate-boot-loader-2.6.32-trunk-amd64:
true
** Kernel log:
[ 2.246471] forcedeth 0000:00:09.0: PCI INT A -> Link[AMC1] -> GSI 20
(level, low) -> IRQ 20
[ 2.246475] forcedeth 0000:00:09.0: setting latency timer to 64
[ 2.246527] nv_probe: set workaround bit for reversed mac addr
[ 2.764733] forcedeth 0000:00:09.0: ifname eth1, PHY OUI 0x5043 @ 1, addr
00:1b:fc:a4:14:e1
[ 2.764736] forcedeth 0000:00:09.0: highdma csum vlan pwrctl mgmt gbit
lnktim msi desc-v3
[ 2.765055] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 23
[ 2.765058] sata_nv 0000:00:05.1: PCI INT B -> Link[APSJ] -> GSI 23 (level,
low) -> IRQ 23
[ 2.765061] sata_nv 0000:00:05.1: Using SWNCQ mode
[ 2.765349] sata_nv 0000:00:05.1: setting latency timer to 64
[ 2.765444] scsi6 : sata_nv
[ 2.765496] scsi7 : sata_nv
[ 2.765648] ata7: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xc800 irq 23
[ 2.765650] ata8: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xc808 irq 23
[ 2.765976] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 22
[ 2.765979] ohci_hcd 0000:00:02.0: PCI INT A -> Link[APCF] -> GSI 22 (level,
low) -> IRQ 22
[ 2.765989] ohci_hcd 0000:00:02.0: setting latency timer to 64
[ 2.765991] ohci_hcd 0000:00:02.0: OHCI Host Controller
[ 2.766006] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus
number 2
[ 2.766017] ohci_hcd 0000:00:02.0: irq 22, io mem 0xfe02f000
[ 2.822017] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.822019] usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 2.822021] usb usb2: Product: OHCI Host Controller
[ 2.822023] usb usb2: Manufacturer: Linux 2.6.32-trunk-amd64 ohci_hcd
[ 2.822024] usb usb2: SerialNumber: 0000:00:02.0
[ 2.822092] usb usb2: configuration #1 chosen from 1 choice
[ 2.822120] hub 2-0:1.0: USB hub found
[ 2.822128] hub 2-0:1.0: 10 ports detected
[ 2.822486] ACPI: PCI Interrupt Link [ASA2] enabled at IRQ 21
[ 2.822489] sata_nv 0000:00:05.2: PCI INT C -> Link[ASA2] -> GSI 21 (level,
low) -> IRQ 21
[ 2.822491] sata_nv 0000:00:05.2: Using SWNCQ mode
[ 2.822768] sata_nv 0000:00:05.2: setting latency timer to 64
[ 2.822841] scsi8 : sata_nv
[ 2.822891] scsi9 : sata_nv
[ 2.823036] ata9: SATA max UDMA/133 cmd 0xc400 ctl 0xc000 bmdma 0xb400 irq 21
[ 2.823038] ata10: SATA max UDMA/133 cmd 0xbc00 ctl 0xb800 bmdma 0xb408 irq
21
[ 3.086224] ata7: SATA link down (SStatus 0 SControl 300)
[ 3.142218] ata9: SATA link down (SStatus 0 SControl 300)
[ 3.196019] usb 2-4: new low speed USB device using ohci_hcd and address 2
[ 3.404029] usb 2-4: New USB device found, idVendor=1241, idProduct=1111
[ 3.404032] usb 2-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.404094] usb 2-4: configuration #1 chosen from 1 choice
[ 3.406221] ata8: SATA link down (SStatus 0 SControl 300)
[ 3.726220] ata10: SATA link down (SStatus 0 SControl 300)
[ 3.730776] sd 4:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232
GiB)
[ 3.730809] sd 4:0:0:0: [sda] Write Protect is off
[ 3.730812] sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.730828] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 3.730935] sda: sda1 sda2 < sda5 > sda3
[ 3.761830] sd 4:0:0:0: [sda] Attached SCSI disk
[ 3.764588] ide-cd driver 5.00
[ 3.767302] usbcore: registered new interface driver hiddev
[ 3.767863] ide-cd: hdb: ATAPI 32X DVD-ROM DVD-R/RAM CD-R/RW drive, 2048kB
Cache
[ 3.767868] Uniform CD-ROM driver Revision: 3.20
[ 3.775251] input: HID 1241:1111 as
/devices/pci0000:00/0000:00:02.0/usb2/2-4/2-4:1.0/input/input4
[ 3.775318] generic-usb 0003:1241:1111.0001: input,hidraw0: USB HID v1.00
Mouse [HID 1241:1111] on usb-0000:00:02.0-4/input0
[ 3.775342] usbcore: registered new interface driver usbhid
[ 3.775345] usbhid: v2.6:USB HID core driver
[ 4.068357] PM: Starting manual resume from disk
[ 4.158955] EXT4-fs (sda1): mounted filesystem with ordered data mode
[ 5.310654] udev: starting version 150
[ 5.509152] processor LNXCPU:00: registered as cooling_device1
[ 5.509189] processor LNXCPU:01: registered as cooling_device2
[ 5.711514] EDAC MC: Ver: 2.1.0 Jan 10 2010
[ 5.713134] EDAC amd64_edac: Ver: 3.2.0 Jan 10 2010
[ 5.713174] EDAC amd64: This node reports that Memory ECC is currently
disabled, set F3x44[22] (0000:00:18.3).
[ 5.713180] EDAC amd64: WARNING: ECC is disabled by BIOS. Module will NOT be
loaded.
[ 5.713181] Either Enable ECC in the BIOS, or set 'ecc_enable_override'.
[ 5.713182] Also, use of the override can cause unknown side effects.
[ 5.713194] amd64_edac: probe of 0000:00:18.2 failed with error -22
[ 5.715014] k8temp 0000:00:18.3: Temperature readouts might be wrong - check
erratum #141
[ 5.772947] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 5.784437] parport_pc 00:0a: reported by Plug and Play ACPI
[ 5.784462] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
[ 5.793132] i2c i2c-0: nForce2 SMBus adapter at 0x1c00
[ 5.793136] ACPI: I/O resource nForce2_smbus [0x1c40-0x1c7f] conflicts with
ACPI region SM00 [0x1c40-0x1c45]
[ 5.793190] ACPI: If an ACPI driver is available for this device, you should
use it instead of the native driver
[ 5.793192] nForce2_smbus 0000:00:01.1: Error probing SMB2.
[ 6.492726] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 20
[ 6.492731] HDA Intel 0000:00:06.1: PCI INT B -> Link[AAZA] -> GSI 20
(level, low) -> IRQ 20
[ 6.492809] HDA Intel 0000:00:06.1: setting latency timer to 64
[ 7.234569] input: HDA Digital PCBeep as
/devices/pci0000:00/0000:00:06.1/input/input6
[ 7.876444] Adding 2650684k swap on /dev/sda5. Priority:-1 extents:1
across:2650684k
[ 8.222751] loop: module loaded
[ 8.633524] EXT4-fs (sda3): mounted filesystem with ordered data mode
[ 9.368466] alloc irq_desc for 30 on node 0
[ 9.368470] alloc kstat_irqs on node 0
[ 9.368478] forcedeth 0000:00:08.0: irq 30 for MSI/MSI-X
[ 9.829755] fuse init (API version 7.13)
[ 10.200103] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor
5600+ processors (2 cpu cores) (version 2.20.00)
[ 10.200115] [Firmware Bug]: powernow-k8: No compatible ACPI _PSS objects
found.
[ 10.200116] [Firmware Bug]: powernow-k8: Try again with latest BIOS.
[ 16.191484] lp0: using parport0 (interrupt-driven).
[ 16.237360] ppdev: user-space parallel port driver
[ 19.788015] eth0: no IPv6 routers present
[ 21.946256] alloc irq_desc for 31 on node 0
[ 21.946259] alloc kstat_irqs on node 0
[ 21.946268] forcedeth 0000:00:09.0: irq 31 for MSI/MSI-X
[ 21.946451] eth1: no link during initialization.
[ 21.947251] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 5327.271644] reportbug[4136] trap divide error ip:7ff73b26e7f0
sp:7ff734b02200 error:0 in libgtk-x11-2.0.so.0.1800.6[7ff73b142000+3fd000]
** Model information
sys_vendor: System manufacturer
product_name: System Product Name
product_version: System Version
chassis_vendor: Chassis Manufacture
chassis_version: Chassis Version
bios_vendor: Phoenix Technologies, LTD
bios_version: ASUS M2N-SLI DELUXE ACPI BIOS Revision 1003
board_vendor: ASUSTeK Computer INC.
board_name: M2N-SLI DELUXE
board_version: 1.XX
** Loaded modules:
Module Size Used by
ppdev 5030 0
lp 7462 0
cpufreq_stats 2659 0
cpufreq_userspace 1992 0
cpufreq_powersave 902 0
cpufreq_conservative 5162 0
fuse 50078 1
loop 11767 0
firewire_sbp2 11450 0
snd_hda_codec_analog 64530 1
snd_hda_intel 18147 2
snd_hda_codec 54212 2 snd_hda_codec_analog,snd_hda_intel
snd_hwdep 5364 1 snd_hda_codec
snd_pcm_oss 32399 0
snd_mixer_oss 12606 1 snd_pcm_oss
snd_pcm 60615 3 snd_hda_intel,snd_hda_codec,snd_pcm_oss
snd_seq_midi 4208 0
snd_rawmidi 15291 1 snd_seq_midi
snd_seq_midi_event 4628 1 snd_seq_midi
snd_seq 42769 2 snd_seq_midi,snd_seq_midi_event
snd_timer 15502 2 snd_pcm,snd_seq
snd_seq_device 4477 3 snd_seq_midi,snd_rawmidi,snd_seq
i2c_nforce2 5264 0
parport_pc 18839 1
pcspkr 1699 0
evdev 7336 11
snd 44718 15
snd_hda_codec_analog,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
i2c_core 15584 1 i2c_nforce2
k8temp 3139 0
edac_core 29245 0
edac_mce_amd 6353 0
parport 27938 3 ppdev,lp,parport_pc
asus_atk0110 7686 0
soundcore 4598 1 snd
snd_page_alloc 6217 2 snd_hda_intel,snd_pcm
processor 29479 0
ext4 285067 2
mbcache 4970 1 ext4
jbd2 66855 1 ext4
crc16 1319 1 ext4
usbhid 31196 0
ide_cd_mod 24744 0
hid 62745 1 usbhid
cdrom 29399 1 ide_cd_mod
sd_mod 29673 4
crc_t10dif 1276 1 sd_mod
ide_pci_generic 2788 0
ohci_hcd 19196 0
firewire_ohci 19452 0
pata_jmicron 2280 0
ata_generic 2983 0
amd74xx 4476 0
floppy 49087 0
firewire_core 36560 2 firewire_sbp2,firewire_ohci
crc_itu_t 1307 1 firewire_core
ahci 31494 0
ehci_hcd 30578 0
sata_nv 19182 3
button 4634 0
libata 131655 4 pata_jmicron,ata_generic,ahci,sata_nv
forcedeth 45432 0
scsi_mod 121909 3 firewire_sbp2,sd_mod,libata
ide_core 76802 3 ide_cd_mod,ide_pci_generic,amd74xx
usbcore 121687 4 usbhid,ohci_hcd,ehci_hcd
nls_base 6377 1 usbcore
thermal 11674 0
fan 3346 0
thermal_sys 11878 3 processor,thermal,fan
** PCI devices:
00:00.0 RAM memory [0500]: nVidia Corporation MCP55 Memory Controller
[10de:0369] (rev a1)
Subsystem: ASUSTeK Computer Inc. Device [1043:8239]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:01.0 ISA bridge [0601]: nVidia Corporation MCP55 LPC Bridge [10de:0360] (rev
a2)
Subsystem: ASUSTeK Computer Inc. Device [1043:8239]
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
00:01.1 SMBus [0c05]: nVidia Corporation MCP55 SMBus [10de:0368] (rev a2)
Subsystem: ASUSTeK Computer Inc. Device [1043:8239]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 10
Region 0: I/O ports at fc00 [size=64]
Region 4: I/O ports at 1c00 [size=64]
Region 5: I/O ports at 1c40 [size=64]
Capabilities: <access denied>
Kernel driver in use: nForce2_smbus
00:01.2 RAM memory [0500]: nVidia Corporation MCP55 Memory Controller
[10de:036a] (rev a2)
Subsystem: ASUSTeK Computer Inc. Device [1043:8239]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00:02.0 USB Controller [0c03]: nVidia Corporation MCP55 USB Controller
[10de:036c] (rev a1) (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:8239]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin A routed to IRQ 22
Region 0: Memory at fe02f000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: ohci_hcd
00:02.1 USB Controller [0c03]: nVidia Corporation MCP55 USB Controller
[10de:036d] (rev a2) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:8239]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin B routed to IRQ 21
Region 0: Memory at fe02e000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:04.0 IDE interface [0101]: nVidia Corporation MCP55 IDE [10de:036e] (rev a1)
(prog-if 8a [Master SecP PriP])
Subsystem: ASUSTeK Computer Inc. Device [1043:8239]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable)
[size=8]
Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable)
[size=1]
Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable)
[size=8]
Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable)
[size=1]
Region 4: I/O ports at f000 [size=16]
Capabilities: <access denied>
Kernel driver in use: AMD_IDE
00:05.0 IDE interface [0101]: nVidia Corporation MCP55 SATA Controller
[10de:037f] (rev a2) (prog-if 85 [Master SecO PriO])
Subsystem: ASUSTeK Computer Inc. Device [1043:8239]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin A routed to IRQ 22
Region 0: I/O ports at 09f0 [size=8]
Region 1: I/O ports at 0bf0 [size=4]
Region 2: I/O ports at 0970 [size=8]
Region 3: I/O ports at 0b70 [size=4]
Region 4: I/O ports at dc00 [size=16]
Region 5: Memory at fe02d000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: sata_nv
00:05.1 IDE interface [0101]: nVidia Corporation MCP55 SATA Controller
[10de:037f] (rev a2) (prog-if 85 [Master SecO PriO])
Subsystem: ASUSTeK Computer Inc. Device [1043:8239]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin B routed to IRQ 23
Region 0: I/O ports at 09e0 [size=8]
Region 1: I/O ports at 0be0 [size=4]
Region 2: I/O ports at 0960 [size=8]
Region 3: I/O ports at 0b60 [size=4]
Region 4: I/O ports at c800 [size=16]
Region 5: Memory at fe02c000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: sata_nv
00:05.2 IDE interface [0101]: nVidia Corporation MCP55 SATA Controller
[10de:037f] (rev a2) (prog-if 85 [Master SecO PriO])
Subsystem: ASUSTeK Computer Inc. Device [1043:8239]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin C routed to IRQ 21
Region 0: I/O ports at c400 [size=8]
Region 1: I/O ports at c000 [size=4]
Region 2: I/O ports at bc00 [size=8]
Region 3: I/O ports at b800 [size=4]
Region 4: I/O ports at b400 [size=16]
Region 5: Memory at fe02b000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: sata_nv
00:06.0 PCI bridge [0604]: nVidia Corporation MCP55 PCI bridge [10de:0370] (rev
a2) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
Memory behind bridge: fde00000-fdefffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr+ DiscTmrStat- DiscTmrSERREn+
Capabilities: <access denied>
00:06.1 Audio device [0403]: nVidia Corporation MCP55 High Definition Audio
[10de:0371] (rev a2)
Subsystem: ASUSTeK Computer Inc. Device [1043:81f6]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0 (500ns min, 1250ns max)
Interrupt: pin B routed to IRQ 20
Region 0: Memory at fe020000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
00:08.0 Bridge [0680]: nVidia Corporation MCP55 Ethernet [10de:0373] (rev a2)
Subsystem: ASUSTeK Computer Inc. Device [1043:8239]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0 (250ns min, 5000ns max)
Interrupt: pin A routed to IRQ 30
Region 0: Memory at fe02a000 (32-bit, non-prefetchable) [size=4K]
Region 1: I/O ports at b000 [size=8]
Region 2: Memory at fe029000 (32-bit, non-prefetchable) [size=256]
Region 3: Memory at fe028000 (32-bit, non-prefetchable) [size=16]
Capabilities: <access denied>
Kernel driver in use: forcedeth
00:09.0 Bridge [0680]: nVidia Corporation MCP55 Ethernet [10de:0373] (rev a2)
Subsystem: ASUSTeK Computer Inc. Device [1043:8239]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0 (250ns min, 5000ns max)
Interrupt: pin A routed to IRQ 31
Region 0: Memory at fe027000 (32-bit, non-prefetchable) [size=4K]
Region 1: I/O ports at ac00 [size=8]
Region 2: Memory at fe026000 (32-bit, non-prefetchable) [size=256]
Region 3: Memory at fe025000 (32-bit, non-prefetchable) [size=16]
Capabilities: <access denied>
Kernel driver in use: forcedeth
00:0a.0 PCI bridge [0604]: nVidia Corporation MCP55 PCI Express bridge
[10de:0376] (rev a2) (prog-if 00 [Normal decode])
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:0b.0 PCI bridge [0604]: nVidia Corporation MCP55 PCI Express bridge
[10de:0374] (rev a2) (prog-if 00 [Normal decode])
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:0c.0 PCI bridge [0604]: nVidia Corporation MCP55 PCI Express bridge
[10de:0374] (rev a2) (prog-if 00 [Normal decode])
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:0d.0 PCI bridge [0604]: nVidia Corporation MCP55 PCI Express bridge
[10de:0378] (rev a2) (prog-if 00 [Normal decode])
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:0e.0 PCI bridge [0604]: nVidia Corporation MCP55 PCI Express bridge
[10de:0375] (rev a2) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=06, subordinate=06, sec-latency=0
I/O behind bridge: 00008000-00009fff
Memory behind bridge: fdd00000-fddfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:0f.0 PCI bridge [0604]: nVidia Corporation MCP55 PCI Express bridge
[10de:0377] (rev a2) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=07, subordinate=07, sec-latency=0
I/O behind bridge: 00007000-00007fff
Memory behind bridge: f8000000-fbffffff
Prefetchable memory behind bridge: 00000000e0000000-00000000efffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
HyperTransport Technology Configuration [1022:1100]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
Address Map [1022:1101]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
DRAM Controller [1022:1102]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
Miscellaneous Control [1022:1103]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
Kernel driver in use: k8temp
01:0b.0 FireWire (IEEE 1394) [0c00]: Texas Instruments TSB43AB22/A
IEEE-1394a-2000 Controller (PHY/Link) [104c:8023] (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. K8N4-E Mainboard [1043:808b]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (500ns min, 1000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 19
Region 0: Memory at fdeff000 (32-bit, non-prefetchable) [size=2K]
Region 1: Memory at fdef8000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: firewire_ohci
06:00.0 SATA controller [0106]: JMicron Technology Corp. JMB362/JMB363 Serial
ATA Controller [197b:2363] (rev 03) (prog-if 01 [AHCI 1.0])
Subsystem: ASUSTeK Computer Inc. P5B [JMB363] [1043:81e4]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 16
Region 5: Memory at fddfe000 (32-bit, non-prefetchable) [size=8K]
Expansion ROM at fdde0000 [disabled] [size=64K]
Capabilities: <access denied>
Kernel driver in use: ahci
06:00.1 IDE interface [0101]: JMicron Technology Corp. JMB362/JMB363 Serial ATA
Controller [197b:2363] (rev 03) (prog-if 85 [Master SecO PriO])
Subsystem: ASUSTeK Computer Inc. P5B [JMB363] [1043:81e4]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 16
Region 0: I/O ports at 9c00 [size=8]
Region 1: I/O ports at 9800 [size=4]
Region 2: I/O ports at 9400 [size=8]
Region 3: I/O ports at 9000 [size=4]
Region 4: I/O ports at 8c00 [size=16]
Capabilities: <access denied>
Kernel driver in use: pata_jmicron
07:00.0 VGA compatible controller [0300]: nVidia Corporation G84 [GeForce 8600
GT] [10de:0402] (rev a1) (prog-if 00 [VGA controller])
Subsystem: ASUSTeK Computer Inc. Device [1043:8255]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 10
Region 0: Memory at fa000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at e0000000 (64-bit, prefetchable) [size=256M]
Region 3: Memory at f8000000 (64-bit, non-prefetchable) [size=32M]
Region 5: I/O ports at 7c00 [size=128]
Expansion ROM at fbfe0000 [disabled] [size=128K]
Capabilities: <access denied>
** USB devices:
Bus 002 Device 002: ID 1241:1111 Belkin Mouse
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
