Let's add XFS team in CC. On 2006-09-24, Dan Ohnesorg <[EMAIL PROTECTED]> wrote: > Package: linux-image-2.6-amd64 > Version: 2.6.17+2 > Severity: critical > Justification: breaks the whole system
More details, please. What happend before this boot? Why ext3 is recovering? > raid1: raid set md1 active with 4 out of 4 mirrors > EXT3-fs: INFO: recovery required on readonly filesystem. > EXT3-fs: write access will be enabled during recovery. > kjournald starting. Commit interval 5 seconds And why XFS does ? In upstream there are very hidden bugs with XFS, which are very hard to find, because they are rare and are showed on big machines: huge RAM, many CPUs. Maybe you can help. (s)ata + xfs bug: <http://permalink.gmane.org/gmane.linux.kernel/446612> devmaper + xfs bug: <http://permalink.gmane.org/gmane.linux.kernel/444139> (use Subject links to navigate and find all thread) > -- System Information: > Debian Release: testing/unstable > APT prefers testing > APT policy: (500, 'testing') > Architecture: amd64 (x86_64) > Shell: /bin/sh linked to /bin/bash > Kernel: Linux 2.6.17-2-amd64 > Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) > > Versions of packages linux-image-2.6-amd64 depends on: > ii linux-image-2.6.17-2-amd64 2.6.17-9 Linux 2.6.17 image on AMD64 > > linux-image-2.6-amd64 recommends no packages. > > -- no debconf information > > -- dmesg output > > Bootdata ok (command line is root=/dev/md1 ro ) > Linux version 2.6.17-2-amd64 (Debian 2.6.17-9) ([EMAIL PROTECTED]) (gcc > version 4.1.2 20060901 (prerelease) (Debian 4.1.1-13)) #1 SMP Wed Sep 13 > 17:49:33 CEST 2006 > BIOS-provided physical RAM map: > BIOS-e820: 0000000000000000 - 000000000009e800 (usable) > BIOS-e820: 000000000009e800 - 00000000000a0000 (reserved) > BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) > BIOS-e820: 0000000000100000 - 000000007ed26000 (usable) > BIOS-e820: 000000007ed26000 - 000000007ede7000 (ACPI NVS) > BIOS-e820: 000000007ede7000 - 000000007fea2000 (usable) > BIOS-e820: 000000007fea2000 - 000000007fee9000 (ACPI NVS) > BIOS-e820: 000000007fee9000 - 000000007feed000 (usable) > BIOS-e820: 000000007feed000 - 000000007feff000 (ACPI data) > BIOS-e820: 000000007feff000 - 000000007ff00000 (usable) > DMI 2.3 present. > ACPI: RSDP (v000 INTEL ) @ 0x00000000000fe020 > ACPI: RSDT (v001 INTEL D975XBX 0x0000026a MSFT 0x01000013) @ > 0x000000007fefde48 > ACPI: FADT (v001 INTEL D975XBX 0x0000026a MSFT 0x01000013) @ > 0x000000007fefcf10 > ACPI: MADT (v001 INTEL D975XBX 0x0000026a MSFT 0x01000013) @ > 0x000000007fefce10 > ACPI: WDDT (v001 INTEL D975XBX 0x0000026a MSFT 0x01000013) @ > 0x000000007fef7f90 > ACPI: MCFG (v001 INTEL D975XBX 0x0000026a MSFT 0x01000013) @ > 0x000000007fef7f10 > ACPI: ASF! (v032 INTEL D975XBX 0x0000026a MSFT 0x01000013) @ > 0x000000007fefcd10 > ACPI: HPET (v001 INTEL D975XBX 0x0000026a MSFT 0x01000013) @ > 0x000000007fef7e90 > ACPI: SSDT (v001 INTEL CpuPm 0x0000026a MSFT 0x01000013) @ > 0x000000007fefdc10 > ACPI: SSDT (v001 INTEL Cpu0Ist 0x0000026a MSFT 0x01000013) @ > 0x000000007fefda10 > ACPI: SSDT (v001 INTEL Cpu1Ist 0x0000026a MSFT 0x01000013) @ > 0x000000007fefd810 > ACPI: SSDT (v001 INTEL Cpu2Ist 0x0000026a MSFT 0x01000013) @ > 0x000000007fefd610 > ACPI: SSDT (v001 INTEL Cpu3Ist 0x0000026a MSFT 0x01000013) @ > 0x000000007fefd410 > ACPI: DSDT (v001 INTEL D975XBX 0x0000026a MSFT 0x01000013) @ > 0x0000000000000000 > No NUMA configuration found > Faking a node at 0000000000000000-000000007ff00000 > Bootmem setup node 0 0000000000000000-000000007ff00000 > On node 0 totalpages: 515371 > DMA zone: 2825 pages, LIFO batch:0 > DMA32 zone: 512546 pages, LIFO batch:31 > ACPI: PM-Timer IO Port: 0x408 > ACPI: Local APIC address 0xfee00000 > ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) > Processor #0 15:6 APIC version 20 > ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) > Processor #1 15:6 APIC version 20 > ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled) > ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled) > ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) > ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) > ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) > IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 > ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) > ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) > ACPI: IRQ0 used by override. > ACPI: IRQ2 used by override. > ACPI: IRQ9 used by override. > Setting APIC routing to physical flat > ACPI: HPET id: 0x8086a201 base: 0xfed00000 > Using ACPI (MADT) for SMP configuration information > Allocating PCI resources starting at 80000000 (gap: 7ff00000:80100000) > Checking aperture... > SMP: Allowing 4 CPUs, 2 hotplug CPUs > Built 1 zonelists > Kernel command line: root=/dev/md1 ro > Initializing CPU#0 > PID hash table entries: 4096 (order: 12, 32768 bytes) > time.c: Using 14.318180 MHz WALL HPET GTOD HPET/TSC timer. > time.c: Detected 2800.208 MHz processor. > Console: colour VGA+ 80x25 > Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) > Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) > Memory: 2052884k/2096128k available (1872k kernel code, 41724k reserved, 833k > data, 172k init) > Calibrating delay using timer specific routine.. 5606.39 BogoMIPS > (lpj=11212780) > Security Framework v1.0.0 initialized > SELinux: Disabled at boot. > Capability LSM initialized > Mount-cache hash table entries: 256 > CPU: Trace cache: 12K uops, L1 D cache: 16K > CPU: L2 cache: 2048K > using mwait in idle threads. > CPU: Physical Processor ID: 0 > CPU: Processor Core ID: 0 > CPU0: Thermal monitoring enabled (TM1) > SMP alternatives: switching to UP code > Using local APIC timer interrupts. > result 12500881 > Detected 12.500 MHz APIC timer. > SMP alternatives: switching to SMP code > Booting processor 1/2 APIC 0x1 > Initializing CPU#1 > Calibrating delay using timer specific routine.. 5600.39 BogoMIPS > (lpj=11200793) > CPU: Trace cache: 12K uops, L1 D cache: 16K > CPU: L2 cache: 2048K > CPU: Physical Processor ID: 0 > CPU: Processor Core ID: 1 > CPU1: Thermal monitoring enabled (TM1) > Intel(R) Pentium(R) D CPU 2.80GHz stepping 04 > APIC error on CPU1: 00(40) > Brought up 2 CPUs > testing NMI watchdog ... OK. > migration_cost=1985 > checking if image is initramfs... it is > Freeing initrd memory: 5291k freed > NET: Registered protocol family 16 > ACPI: bus type pci registered > PCI: BIOS Bug: MCFG area at f0000000 is not E820-reserved > PCI: Not using MMCONFIG. > PCI: Using configuration type 1 > ACPI: Subsystem revision 20060127 > ACPI: Interpreter enabled > ACPI: Using IOAPIC for interrupt routing > ACPI: PCI Root Bridge [PCI0] (0000:00) > PCI: Probing PCI hardware (bus 00) > ACPI: Assume root bridge [\_SB_.PCI0] bus is 0 > PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1 > Boot video device is 0000:01:00.0 > PCI: Transparent bridge - 0000:00:1e.0 > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT] > ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12) > ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *9 10 11 12) > ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 *9 10 11 12) > ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12) > ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12) *0, disabled. > ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12) *0, disabled. > ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 11 12) *0, disabled. > ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 *10 11 12) > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX5._PRT] > Linux Plug and Play Support v0.97 (c) Adam Belay > pnp: PnP ACPI init > pnp: ACPI device : hid PNP0A03 > pnp: ACPI device : hid PNP0C02 > pnp: ACPI device : hid PNP0200 > pnp: ACPI device : hid PNP0B00 > pnp: ACPI device : hid PNP0C04 > pnp: ACPI device : hid PNP0800 > pnp: ACPI device : hid PNP0C02 > pnp: ACPI device : hid PNP0700 > pnp: ACPI device : hid PNP0401 > pnp: ACPI device : hid PNP0303 > pnp: ACPI device : hid PNP0501 > pnp: ACPI device : hid PNP0003 > pnp: ACPI device : hid PNP0103 > pnp: PnP ACPI: found 13 devices > usbcore: registered new driver usbfs > usbcore: registered new driver hub > PCI: Using ACPI for IRQ routing > PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report > TC classifier action (bugs to netdev@vger.kernel.org cc [EMAIL PROTECTED]) > hpet0: at MMIO 0xfed00000 (virtual 0xffffffffff5fe000), IRQs 2, 8, 0 > hpet0: 3 64-bit timers, 14318180 Hz > PCI-DMA: Disabling IOMMU. > pnp: the driver 'system' has been registered > pnp: match found with the PnP device '00:01' and the driver 'system' > pnp: match found with the PnP device '00:06' and the driver 'system' > pnp: 00:06: ioport range 0x500-0x53f has been reserved > pnp: 00:06: ioport range 0x400-0x47f could not be reserved > pnp: 00:06: ioport range 0x680-0x6ff has been reserved > PCI: Failed to allocate mem resource #6:[EMAIL PROTECTED] for 0000:01:00.0 > PCI: Bridge: 0000:00:01.0 > IO window: disabled. > MEM window: 90000000-91ffffff > PREFETCH window: 80000000-8fffffff > PCI: Bridge: 0000:00:1c.0 > IO window: disabled. > MEM window: disabled. > PREFETCH window: disabled. > PCI: Bridge: 0000:00:1c.4 > IO window: disabled. > MEM window: disabled. > PREFETCH window: disabled. > PCI: Bridge: 0000:00:1c.5 > IO window: 2000-2fff > MEM window: 92100000-921fffff > PREFETCH window: disabled. > PCI: Bridge: 0000:00:1e.0 > IO window: 1000-1fff > MEM window: 92000000-920fffff > PREFETCH window: disabled. > GSI 16 sharing vector 0xA9 and IRQ 16 > ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 169 > PCI: Setting latency timer of device 0000:00:01.0 to 64 > GSI 17 sharing vector 0xB1 and IRQ 17 > ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 177 > PCI: Setting latency timer of device 0000:00:1c.0 to 64 > ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 17 (level, low) -> IRQ 177 > PCI: Setting latency timer of device 0000:00:1c.4 to 64 > ACPI: PCI Interrupt 0000:00:1c.5[B] -> GSI 16 (level, low) -> IRQ 169 > PCI: Setting latency timer of device 0000:00:1c.5 to 64 > PCI: Setting latency timer of device 0000:00:1e.0 to 64 > NET: Registered protocol family 2 > IP route cache hash table entries: 65536 (order: 7, 524288 bytes) > TCP established hash table entries: 262144 (order: 10, 4194304 bytes) > TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) > TCP: Hash tables configured (established 262144 bind 65536) > TCP reno registered > IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $ > audit: initializing netlink socket (disabled) > audit(1159136894.324:1): initialized > VFS: Disk quotas dquot_6.5.1 > Dquot-cache hash table entries: 512 (order 0, 4096 bytes) > Initializing Cryptographic API > io scheduler noop registered > io scheduler anticipatory registered (default) > io scheduler deadline registered > io scheduler cfq registered > ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 169 > PCI: Setting latency timer of device 0000:00:01.0 to 64 > assign_interrupt_mode Found MSI capability > Allocate Port Service[0000:00:01.0:pcie00] > ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 177 > PCI: Setting latency timer of device 0000:00:1c.0 to 64 > assign_interrupt_mode Found MSI capability > Allocate Port Service[0000:00:1c.0:pcie00] > Allocate Port Service[0000:00:1c.0:pcie02] > ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 17 (level, low) -> IRQ 177 > PCI: Setting latency timer of device 0000:00:1c.4 to 64 > assign_interrupt_mode Found MSI capability > Allocate Port Service[0000:00:1c.4:pcie00] > Allocate Port Service[0000:00:1c.4:pcie02] > ACPI: PCI Interrupt 0000:00:1c.5[B] -> GSI 16 (level, low) -> IRQ 169 > PCI: Setting latency timer of device 0000:00:1c.5 to 64 > assign_interrupt_mode Found MSI capability > Allocate Port Service[0000:00:1c.5:pcie00] > Allocate Port Service[0000:00:1c.5:pcie02] > Real Time Clock Driver v1.12ac > hpet_resources: 0xfed00000 is busy > Linux agpgart interface v0.101 (c) Dave Jones > Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled > serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A > pnp: the driver 'serial' has been registered > pnp: match found with the PnP device '00:0a' and the driver 'serial' > 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A > RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize > usbmon: debugfs is not available > pnp: the driver 'i8042 kbd' has been registered > pnp: match found with the PnP device '00:09' and the driver 'i8042 kbd' > pnp: the driver 'i8042 aux' has been registered > PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 > PNP: PS/2 controller doesn't have AUX irq; using default 12 > serio: i8042 AUX port at 0x60,0x64 irq 12 > serio: i8042 KBD port at 0x60,0x64 irq 1 > mice: PS/2 mouse device common for all mice > TCP bic registered > NET: Registered protocol family 1 > NET: Registered protocol family 17 > NET: Registered protocol family 8 > NET: Registered protocol family 20 > ACPI wakeup devices: > SLPB P32 UAR1 PEX0 PEX1 PEX2 PEX3 PEX4 PEX5 UHC1 UHC2 UHC3 UHC4 EHCI AC9M > AZAL > ACPI: (supports S0 S1 S3 S4 S5) > Freeing unused kernel memory: 172k freed > input: AT Translated Set 2 keyboard as /class/input/input0 > GSI 18 sharing vector 0xE1 and IRQ 18 > ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 225 > PCI: Setting latency timer of device 0000:00:1d.7 to 64 > ehci_hcd 0000:00:1d.7: EHCI Host Controller > ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 > ehci_hcd 0000:00:1d.7: debug port 1 > PCI: cache line size of 128 is not supported by device 0000:00:1d.7 > ehci_hcd 0000:00:1d.7: irq 225, io mem 0x92200400 > ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 > usb usb1: configuration #1 chosen from 1 choice > hub 1-0:1.0: USB hub found > hub 1-0:1.0: 8 ports detected > Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 > ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx > USB Universal Host Controller Interface driver v3.0 > SCSI subsystem initialized > libata version 1.20 loaded. > ieee1394: Initialized config rom entry `ip1394' > Intel(R) PRO/1000 Network Driver - version 7.0.33-k2-NAPI > Copyright (c) 1999-2005 Intel Corporation. > ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 225 > PCI: Setting latency timer of device 0000:00:1d.0 to 64 > uhci_hcd 0000:00:1d.0: UHCI Host Controller > uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 > uhci_hcd 0000:00:1d.0: irq 225, io base 0x00003080 > usb usb2: configuration #1 chosen from 1 choice > hub 2-0:1.0: USB hub found > hub 2-0:1.0: 2 ports detected > GSI 19 sharing vector 0xE9 and IRQ 19 > ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 233 > PCI: Setting latency timer of device 0000:00:1d.1 to 64 > uhci_hcd 0000:00:1d.1: UHCI Host Controller > uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 > uhci_hcd 0000:00:1d.1: irq 233, io base 0x00003060 > usb usb3: configuration #1 chosen from 1 choice > hub 3-0:1.0: USB hub found > hub 3-0:1.0: 2 ports detected > GSI 20 sharing vector 0x32 and IRQ 20 > ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 50 > PCI: Setting latency timer of device 0000:00:1d.2 to 64 > uhci_hcd 0000:00:1d.2: UHCI Host Controller > uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 > uhci_hcd 0000:00:1d.2: irq 50, io base 0x00003040 > usb usb4: configuration #1 chosen from 1 choice > hub 4-0:1.0: USB hub found > hub 4-0:1.0: 2 ports detected > ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 169 > PCI: Setting latency timer of device 0000:00:1d.3 to 64 > uhci_hcd 0000:00:1d.3: UHCI Host Controller > uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 > uhci_hcd 0000:00:1d.3: irq 169, io base 0x00003020 > usb usb5: configuration #1 chosen from 1 choice > hub 5-0:1.0: USB hub found > hub 5-0:1.0: 2 ports detected > sata_sil 0000:05:05.0: version 0.9 > ACPI: PCI Interrupt 0000:05:05.0[A] -> GSI 17 (level, low) -> IRQ 177 > sata_sil 0000:05:05.0: Applying R_ERR on DMA activate FIS errata fix > ata1: SATA max UDMA/100 cmd 0xFFFFC20000034880 ctl 0xFFFFC2000003488A bmdma > 0xFFFFC20000034800 irq 177 > ata2: SATA max UDMA/100 cmd 0xFFFFC200000348C0 ctl 0xFFFFC200000348CA bmdma > 0xFFFFC20000034808 irq 177 > ata3: SATA max UDMA/100 cmd 0xFFFFC20000034A80 ctl 0xFFFFC20000034A8A bmdma > 0xFFFFC20000034A00 irq 177 > ata4: SATA max UDMA/100 cmd 0xFFFFC20000034AC0 ctl 0xFFFFC20000034ACA bmdma > 0xFFFFC20000034A08 irq 177 > ata1: SATA link up 1.5 Gbps (SStatus 113) > ata1: dev 0 cfg 49:2f00 82:746b 83:7f61 84:4023 85:7469 86:3c41 87:4023 > 88:207f > ata1: dev 0 ATA-7, max UDMA/133, 781422768 sectors: LBA48 > ata1: dev 0 configured for UDMA/100 > scsi0 : sata_sil > ata2: SATA link down (SStatus 0) > scsi1 : sata_sil > ata3: SATA link up 1.5 Gbps (SStatus 113) > ata3: dev 0 cfg 49:2f00 82:746b 83:7f61 84:4023 85:7469 86:3c41 87:4023 > 88:207f > ata3: dev 0 ATA-7, max UDMA/133, 781422768 sectors: LBA48 > ata3: dev 0 configured for UDMA/100 > scsi2 : sata_sil > ata4: SATA link down (SStatus 0) > scsi3 : sata_sil > Vendor: ATA Model: WDC WD4000YR-01P Rev: 01.0 > Type: Direct-Access ANSI SCSI revision: 05 > Vendor: ATA Model: WDC WD4000YR-01P Rev: 01.0 > Type: Direct-Access ANSI SCSI revision: 05 > ACPI: PCI Interrupt 0000:05:04.0[A] -> GSI 18 (level, low) -> IRQ 50 > ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[50] MMIO=[92004000-920047ff] > Max Packet=[2048] IR/IT contexts=[4/8] > ata_piix 0000:00:1f.2: version 1.05 > ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] > ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 233 > PCI: Setting latency timer of device 0000:00:1f.2 to 64 > ata5: SATA max UDMA/133 cmd 0x30C8 ctl 0x30E6 bmdma 0x30A0 irq 233 > ata6: SATA max UDMA/133 cmd 0x30C0 ctl 0x30E2 bmdma 0x30A8 irq 233 > SCSI device sda: 781422768 512-byte hdwr sectors (400088 MB) > sda: Write Protect is off > sda: Mode Sense: 00 3a 00 00 > SCSI device sda: drive cache: write back > SCSI device sda: 781422768 512-byte hdwr sectors (400088 MB) > sda: Write Protect is off > sda: Mode Sense: 00 3a 00 00 > SCSI device sda: drive cache: write back > sda: sda1 sda2 sda3 < sda5 sda6 > > sd 0:0:0:0: Attached scsi disk sda > SCSI device sdb: 781422768 512-byte hdwr sectors (400088 MB) > sdb: Write Protect is off > sdb: Mode Sense: 00 3a 00 00 > SCSI device sdb: drive cache: write back > SCSI device sdb: 781422768 512-byte hdwr sectors (400088 MB) > sdb: Write Protect is off > sdb: Mode Sense: 00 3a 00 00 > SCSI device sdb: drive cache: write back > sdb: sdb1 sdb2 sdb3 < sdb5 sdb6 > > sd 2:0:0:0: Attached scsi disk sdb > ata5: dev 0 cfg 49:2f00 82:746b 83:7f61 84:4023 85:7469 86:3c41 87:4023 > 88:207f > ata5: dev 0 ATA-7, max UDMA/133, 781422768 sectors: LBA48 > ata5: dev 1 cfg 49:2f00 82:746b 83:7f61 84:4023 85:7469 86:3c41 87:4023 > 88:207f > ata5: dev 1 ATA-7, max UDMA/133, 781422768 sectors: LBA48 > ata5: dev 0 configured for UDMA/133 > ata5: dev 1 configured for UDMA/133 > scsi4 : ata_piix > ata6: SATA port has no device. > scsi5 : ata_piix > Vendor: ATA Model: WDC WD4000YR-01P Rev: 01.0 > Type: Direct-Access ANSI SCSI revision: 05 > SCSI device sdc: 781422768 512-byte hdwr sectors (400088 MB) > sdc: Write Protect is off > sdc: Mode Sense: 00 3a 00 00 > SCSI device sdc: drive cache: write back > SCSI device sdc: 781422768 512-byte hdwr sectors (400088 MB) > sdc: Write Protect is off > sdc: Mode Sense: 00 3a 00 00 > SCSI device sdc: drive cache: write back > sdc: sdc1 sdc2 sdc3 < sdc5 sdc6 > > sd 4:0:0:0: Attached scsi disk sdc > Vendor: ATA Model: WDC WD4000YR-01P Rev: 01.0 > Type: Direct-Access ANSI SCSI revision: 05 > SCSI device sdd: 781422768 512-byte hdwr sectors (400088 MB) > sdd: Write Protect is off > sdd: Mode Sense: 00 3a 00 00 > SCSI device sdd: drive cache: write back > SCSI device sdd: 781422768 512-byte hdwr sectors (400088 MB) > sdd: Write Protect is off > sdd: Mode Sense: 00 3a 00 00 > SCSI device sdd: drive cache: write back > sdd: sdd1 sdd2 sdd3 < sdd5 sdd6 > > sd 4:0:1:0: Attached scsi disk sdd > ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 17 (level, low) -> IRQ 177 > PCI: Setting latency timer of device 0000:04:00.0 to 64 > e1000: 0000:04:00.0: e1000_probe: (PCI Express:2.5Gb/s:Width x1) > 00:16:76:8e:df:38 > e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection > ICH7: IDE controller at PCI slot 0000:00:1f.1 > ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 50 > ICH7: chipset revision 1 > ICH7: not 100% native mode: will probe irqs later > ide0: BM-DMA at 0x30b0-0x30b7, BIOS settings: hda:DMA, hdb:pio > Probing IDE interface ide0... > ieee1394: Host added: ID:BUS[0-00:1023] GUID[0090270001a9c40f] > hda: HL-DT-ST DVDRAM GSA-H10N, ATAPI CD/DVD-ROM drive > ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 > hda: ATAPI 48X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33) > Uniform CD-ROM driver Revision: 3.20 > Probing IDE interface ide1... > md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 > md: bitmap version 4.39 > md: raid1 personality registered for level 1 > md: md1 stopped. > md: bind<sdb2> > md: bind<sdd2> > md: bind<sdc2> > md: bind<sda2> > raid1: raid set md1 active with 4 out of 4 mirrors > EXT3-fs: INFO: recovery required on readonly filesystem. > EXT3-fs: write access will be enabled during recovery. > kjournald starting. Commit interval 5 seconds > EXT3-fs: md1: orphan cleanup on readonly fs > ext3_orphan_cleanup: deleting unreferenced inode 374973 > ext3_orphan_cleanup: deleting unreferenced inode 374945 > EXT3-fs: md1: 2 orphan inodes deleted > EXT3-fs: recovery complete. > EXT3-fs: mounted filesystem with ordered data mode. > input: PC Speaker as /class/input/input1 > Floppy drive(s): fd0 is 1.44M > FDC 0 is a post-1991 82077 > hw_random hardware driver 1.0.0 loaded > pnp: the driver 'parport_pc' has been registered > pnp: match found with the PnP device '00:08' and the driver 'parport_pc' > parport: PnPBIOS parport detected. > parport0: PC-style at 0x378 (0x778), irq 7, using FIFO > [PCSPP,TRISTATE,COMPAT,ECP] > eth1394: eth0: IEEE-1394 IPv4 over 1394 Ethernet (fw-host0) > EXT3 FS on md1, internal journal > loop: loaded (max 8 devices) > ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1) > ieee1394: sbp2: Try serialize_io=0 for better performance > device-mapper: 4.6.0-ioctl (2006-02-17) initialised: [EMAIL PROTECTED] > md: md0 stopped. > md: bind<sdb1> > md: bind<sdd1> > md: bind<sdc1> > md: bind<sda1> > raid1: raid set md0 active with 4 out of 4 mirrors > md: md2 stopped. > md: bind<sdb5> > md: bind<sdd5> > md: bind<sdc5> > md: bind<sda5> > raid1: raid set md2 active with 4 out of 4 mirrors > md: md3 stopped. > md: bind<sdb6> > md: bind<sdd6> > md: bind<sdc6> > md: bind<sda6> > raid5: automatically using best checksumming function: generic_sse > generic_sse: 4277.000 MB/sec > raid5: using function: generic_sse (4277.000 MB/sec) > md: raid5 personality registered for level 5 > md: raid4 personality registered for level 4 > raid5: device sda6 operational as raid disk 0 > raid5: device sdc6 operational as raid disk 3 > raid5: device sdd6 operational as raid disk 2 > raid5: device sdb6 operational as raid disk 1 > raid5: allocated 4262kB for md3 > raid5: raid level 5 set md3 active with 4 out of 4 devices, algorithm 2 > RAID5 conf printout: > --- rd:4 wd:4 fd:0 > disk 0, o:1, dev:sda6 > disk 1, o:1, dev:sdb6 > disk 2, o:1, dev:sdd6 > disk 3, o:1, dev:sdc6 > kjournald starting. Commit interval 5 seconds > EXT3 FS on md0, internal journal > EXT3-fs: mounted filesystem with ordered data mode. > Adding 1959800k swap on /dev/md2. Priority:-1 extents:1 across:1959800k > ACPI: Power Button (FF) [PWRF] > ACPI: Sleep Button (CM) [SLPB] > NET: Registered protocol family 10 > lo: Disabled Privacy Extensions > IPv6 over IPv4 tunneling driver > ADDRCONF(NETDEV_UP): eth1: link is not ready > e1000: eth1: e1000_watchdog_task: NIC Link is Up 100 Mbps Full Duplex > e1000: eth1: e1000_watchdog_task: 10/100 speed: disabling TSO > ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready > eth1: no IPv6 routers present > SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, > no debug enabled > SGI XFS Quota Management subsystem > Filesystem "md3": Disabling barriers, not supported by the underlying device > XFS mounting filesystem md3 > Starting XFS recovery on filesystem: md3 (logdev: internal) > Unable to handle kernel NULL pointer dereference at 0000000000000000 RIP: ><ffffffff802a12c7>{page_to_pfn+0} > PGD 77cd8067 PUD 79744067 PMD 0 > Oops: 0000 [1] SMP > CPU 1 > Modules linked in: xfs ipv6 button ac battery raid5 xor dm_snapshot dm_mirror > dm_mod sbp2 loop eth1394 i2c_i801 parport_pc parport hw_random i2c_core > psmouse serio_raw evdev floppy pcspkr ext3 jbd mbcache raid1 md_mod > ide_generic ide_cd cdrom sd_mod piix ata_piix e1000 ohci1394 ieee1394 > sata_sil libata scsi_mod uhci_hcd generic ide_core ehci_hcd thermal processor > fan > Pid: 4587, comm: mount Not tainted 2.6.17-2-amd64 #1 > RIP: 0010:[<ffffffff802a12c7>] <ffffffff802a12c7>{page_to_pfn+0} > RSP: 0018:ffff81007b347790 EFLAGS: 00010246 > RAX: ffff810078d21480 RBX: 0000000000000000 RCX: 0000001000000000 > RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 > RBP: ffff810079067200 R08: 0000000100000001 R09: 0000000000004001 > R10: ffff810078d21300 R11: 0000000000000190 R12: ffff810078d21300 > R13: 0000000000000000 R14: ffff810077817800 R15: 0000000000000000 > FS: 00002b5835607bc0(0000) GS:ffff81007fe8b6c0(0000) knlGS:0000000000000000 > CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b > CR2: 0000000000000000 CR3: 0000000078603000 CR4: 00000000000006e0 > Process mount (pid: 4587, threadinfo ffff81007b346000, task ffff81007f790a60) > Stack: ffffffff8830665b ffff810079067340 ffffffff882f1b1d ffff810001f8ff00 > 0000000200000000 ffff8100790674c0 ffff810037ed4200 0000000000001000 > 0000000000000008 0000000000000000 > Call Trace: <ffffffff8830665b>{:xfs:xfs_buf_offset+58} > <ffffffff882f1b1d>{:xfs:xlog_recover_commit_trans+1607} > <ffffffff80231367>{submit_bio+184} > <ffffffff882f2729>{:xfs:xlog_recover_process_data+466} > <ffffffff882f31c6>{:xfs:xlog_do_recovery_pass+585} > <ffffffff882f46f4>{:xfs:xlog_recover+243} > <ffffffff882f0b2f>{:xfs:xfs_log_mount+1310} > <ffffffff882f6671>{:xfs:xfs_mountfs+2116} > <ffffffff882fc9ae>{:xfs:xfs_mount+1900} > <ffffffff8830bbb2>{:xfs:xfs_fs_fill_super+126} > <ffffffff802bbfdb>{get_filesystem+18} <ffffffff802b52ef>{sget+850} > <ffffffff802b4c48>{set_bdev_super+0} > <ffffffff802b4c57>{test_bdev_super+0} > <ffffffff802b5dcf>{bd_claim+24} <ffffffff802b5979>{get_sb_bdev+239} > <ffffffff8830bb34>{:xfs:xfs_fs_fill_super+0} > <ffffffff802b55e8>{do_kern_mount+157} > <ffffffff802bd82c>{do_mount+1676} > <ffffffff8022b2c9>{mntput_no_expire+25} > <ffffffff80220571>{__up_read+19} <ffffffff8020a699>{do_page_fault+1151} > <ffffffff8020878d>{__handle_mm_fault+1276} > <ffffffff8025a7a1>{error_exit+0} > <ffffffff80249b2d>{sys_mount+138} <ffffffff80259b0e>{system_call+126} > > Code: 48 8b 07 48 c1 e8 3a 48 8b 14 c5 e0 56 51 80 48 b8 b7 6d db > RIP <ffffffff802a12c7>{page_to_pfn+0} RSP <ffff81007b347790> > CR2: 0000000000000000 > > > -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]