Package: linux-image-2.6-amd64
Version: 2.6.17+2
Severity: critical
Justification: breaks the whole system
-- System Information:
Debian Release: testing/unstable
APT prefers testing
APT policy: (500, 'testing')
Architecture: amd64 (x86_64)
Shell: /bin/sh linked to /bin/bash
Kernel: Linux 2.6.17-2-amd64
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Versions of packages linux-image-2.6-amd64 depends on:
ii linux-image-2.6.17-2-amd64 2.6.17-9 Linux 2.6.17 image on AMD64
linux-image-2.6-amd64 recommends no packages.
-- no debconf information
-- dmesg output
Bootdata ok (command line is root=/dev/md1 ro )
Linux version 2.6.17-2-amd64 (Debian 2.6.17-9) ([EMAIL PROTECTED]) (gcc version
4.1.2 20060901 (prerelease) (Debian 4.1.1-13)) #1 SMP Wed Sep 13 17:49:33 CEST
2006
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009e800 (usable)
BIOS-e820: 000000000009e800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000007ed26000 (usable)
BIOS-e820: 000000007ed26000 - 000000007ede7000 (ACPI NVS)
BIOS-e820: 000000007ede7000 - 000000007fea2000 (usable)
BIOS-e820: 000000007fea2000 - 000000007fee9000 (ACPI NVS)
BIOS-e820: 000000007fee9000 - 000000007feed000 (usable)
BIOS-e820: 000000007feed000 - 000000007feff000 (ACPI data)
BIOS-e820: 000000007feff000 - 000000007ff00000 (usable)
DMI 2.3 present.
ACPI: RSDP (v000 INTEL ) @ 0x00000000000fe020
ACPI: RSDT (v001 INTEL D975XBX 0x0000026a MSFT 0x01000013) @
0x000000007fefde48
ACPI: FADT (v001 INTEL D975XBX 0x0000026a MSFT 0x01000013) @
0x000000007fefcf10
ACPI: MADT (v001 INTEL D975XBX 0x0000026a MSFT 0x01000013) @
0x000000007fefce10
ACPI: WDDT (v001 INTEL D975XBX 0x0000026a MSFT 0x01000013) @
0x000000007fef7f90
ACPI: MCFG (v001 INTEL D975XBX 0x0000026a MSFT 0x01000013) @
0x000000007fef7f10
ACPI: ASF! (v032 INTEL D975XBX 0x0000026a MSFT 0x01000013) @
0x000000007fefcd10
ACPI: HPET (v001 INTEL D975XBX 0x0000026a MSFT 0x01000013) @
0x000000007fef7e90
ACPI: SSDT (v001 INTEL CpuPm 0x0000026a MSFT 0x01000013) @
0x000000007fefdc10
ACPI: SSDT (v001 INTEL Cpu0Ist 0x0000026a MSFT 0x01000013) @
0x000000007fefda10
ACPI: SSDT (v001 INTEL Cpu1Ist 0x0000026a MSFT 0x01000013) @
0x000000007fefd810
ACPI: SSDT (v001 INTEL Cpu2Ist 0x0000026a MSFT 0x01000013) @
0x000000007fefd610
ACPI: SSDT (v001 INTEL Cpu3Ist 0x0000026a MSFT 0x01000013) @
0x000000007fefd410
ACPI: DSDT (v001 INTEL D975XBX 0x0000026a MSFT 0x01000013) @
0x0000000000000000
No NUMA configuration found
Faking a node at 0000000000000000-000000007ff00000
Bootmem setup node 0 0000000000000000-000000007ff00000
On node 0 totalpages: 515371
DMA zone: 2825 pages, LIFO batch:0
DMA32 zone: 512546 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 15:6 APIC version 20
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
Processor #1 15:6 APIC version 20
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Setting APIC routing to physical flat
ACPI: HPET id: 0x8086a201 base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 80000000 (gap: 7ff00000:80100000)
Checking aperture...
SMP: Allowing 4 CPUs, 2 hotplug CPUs
Built 1 zonelists
Kernel command line: root=/dev/md1 ro
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
time.c: Using 14.318180 MHz WALL HPET GTOD HPET/TSC timer.
time.c: Detected 2800.208 MHz processor.
Console: colour VGA+ 80x25
Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Memory: 2052884k/2096128k available (1872k kernel code, 41724k reserved, 833k
data, 172k init)
Calibrating delay using timer specific routine.. 5606.39 BogoMIPS (lpj=11212780)
Security Framework v1.0.0 initialized
SELinux: Disabled at boot.
Capability LSM initialized
Mount-cache hash table entries: 256
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 2048K
using mwait in idle threads.
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU0: Thermal monitoring enabled (TM1)
SMP alternatives: switching to UP code
Using local APIC timer interrupts.
result 12500881
Detected 12.500 MHz APIC timer.
SMP alternatives: switching to SMP code
Booting processor 1/2 APIC 0x1
Initializing CPU#1
Calibrating delay using timer specific routine.. 5600.39 BogoMIPS (lpj=11200793)
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 2048K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU1: Thermal monitoring enabled (TM1)
Intel(R) Pentium(R) D CPU 2.80GHz stepping 04
APIC error on CPU1: 00(40)
Brought up 2 CPUs
testing NMI watchdog ... OK.
migration_cost=1985
checking if image is initramfs... it is
Freeing initrd memory: 5291k freed
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: BIOS Bug: MCFG area at f0000000 is not E820-reserved
PCI: Not using MMCONFIG.
PCI: Using configuration type 1
ACPI: Subsystem revision 20060127
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
Boot video device is 0000:01:00.0
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *9 10 11 12)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 *9 10 11 12)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 *10 11 12)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX5._PRT]
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: ACPI device : hid PNP0A03
pnp: ACPI device : hid PNP0C02
pnp: ACPI device : hid PNP0200
pnp: ACPI device : hid PNP0B00
pnp: ACPI device : hid PNP0C04
pnp: ACPI device : hid PNP0800
pnp: ACPI device : hid PNP0C02
pnp: ACPI device : hid PNP0700
pnp: ACPI device : hid PNP0401
pnp: ACPI device : hid PNP0303
pnp: ACPI device : hid PNP0501
pnp: ACPI device : hid PNP0003
pnp: ACPI device : hid PNP0103
pnp: PnP ACPI: found 13 devices
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
TC classifier action (bugs to netdev@vger.kernel.org cc [EMAIL PROTECTED])
hpet0: at MMIO 0xfed00000 (virtual 0xffffffffff5fe000), IRQs 2, 8, 0
hpet0: 3 64-bit timers, 14318180 Hz
PCI-DMA: Disabling IOMMU.
pnp: the driver 'system' has been registered
pnp: match found with the PnP device '00:01' and the driver 'system'
pnp: match found with the PnP device '00:06' and the driver 'system'
pnp: 00:06: ioport range 0x500-0x53f has been reserved
pnp: 00:06: ioport range 0x400-0x47f could not be reserved
pnp: 00:06: ioport range 0x680-0x6ff has been reserved
PCI: Failed to allocate mem resource #6:[EMAIL PROTECTED] for 0000:01:00.0
PCI: Bridge: 0000:00:01.0
IO window: disabled.
MEM window: 90000000-91ffffff
PREFETCH window: 80000000-8fffffff
PCI: Bridge: 0000:00:1c.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1c.4
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1c.5
IO window: 2000-2fff
MEM window: 92100000-921fffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1e.0
IO window: 1000-1fff
MEM window: 92000000-920fffff
PREFETCH window: disabled.
GSI 16 sharing vector 0xA9 and IRQ 16
ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:01.0 to 64
GSI 17 sharing vector 0xB1 and IRQ 17
ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 177
PCI: Setting latency timer of device 0000:00:1c.0 to 64
ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 17 (level, low) -> IRQ 177
PCI: Setting latency timer of device 0000:00:1c.4 to 64
ACPI: PCI Interrupt 0000:00:1c.5[B] -> GSI 16 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:1c.5 to 64
PCI: Setting latency timer of device 0000:00:1e.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $
audit: initializing netlink socket (disabled)
audit(1159136894.324:1): initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered (default)
io scheduler deadline registered
io scheduler cfq registered
ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:01.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:01.0:pcie00]
ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 177
PCI: Setting latency timer of device 0000:00:1c.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.0:pcie00]
Allocate Port Service[0000:00:1c.0:pcie02]
ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 17 (level, low) -> IRQ 177
PCI: Setting latency timer of device 0000:00:1c.4 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.4:pcie00]
Allocate Port Service[0000:00:1c.4:pcie02]
ACPI: PCI Interrupt 0000:00:1c.5[B] -> GSI 16 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:1c.5 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.5:pcie00]
Allocate Port Service[0000:00:1c.5:pcie02]
Real Time Clock Driver v1.12ac
hpet_resources: 0xfed00000 is busy
Linux agpgart interface v0.101 (c) Dave Jones
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
pnp: the driver 'serial' has been registered
pnp: match found with the PnP device '00:0a' and the driver 'serial'
00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
usbmon: debugfs is not available
pnp: the driver 'i8042 kbd' has been registered
pnp: match found with the PnP device '00:09' and the driver 'i8042 kbd'
pnp: the driver 'i8042 aux' has been registered
PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
PNP: PS/2 controller doesn't have AUX irq; using default 12
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
NET: Registered protocol family 8
NET: Registered protocol family 20
ACPI wakeup devices:
SLPB P32 UAR1 PEX0 PEX1 PEX2 PEX3 PEX4 PEX5 UHC1 UHC2 UHC3 UHC4 EHCI AC9M AZAL
ACPI: (supports S0 S1 S3 S4 S5)
Freeing unused kernel memory: 172k freed
input: AT Translated Set 2 keyboard as /class/input/input0
GSI 18 sharing vector 0xE1 and IRQ 18
ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 225
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 128 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 225, io mem 0x92200400
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
USB Universal Host Controller Interface driver v3.0
SCSI subsystem initialized
libata version 1.20 loaded.
ieee1394: Initialized config rom entry `ip1394'
Intel(R) PRO/1000 Network Driver - version 7.0.33-k2-NAPI
Copyright (c) 1999-2005 Intel Corporation.
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 225
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 225, io base 0x00003080
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
GSI 19 sharing vector 0xE9 and IRQ 19
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 233
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 233, io base 0x00003060
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
GSI 20 sharing vector 0x32 and IRQ 20
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 50
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 50, io base 0x00003040
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:1d.3 to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: irq 169, io base 0x00003020
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
sata_sil 0000:05:05.0: version 0.9
ACPI: PCI Interrupt 0000:05:05.0[A] -> GSI 17 (level, low) -> IRQ 177
sata_sil 0000:05:05.0: Applying R_ERR on DMA activate FIS errata fix
ata1: SATA max UDMA/100 cmd 0xFFFFC20000034880 ctl 0xFFFFC2000003488A bmdma
0xFFFFC20000034800 irq 177
ata2: SATA max UDMA/100 cmd 0xFFFFC200000348C0 ctl 0xFFFFC200000348CA bmdma
0xFFFFC20000034808 irq 177
ata3: SATA max UDMA/100 cmd 0xFFFFC20000034A80 ctl 0xFFFFC20000034A8A bmdma
0xFFFFC20000034A00 irq 177
ata4: SATA max UDMA/100 cmd 0xFFFFC20000034AC0 ctl 0xFFFFC20000034ACA bmdma
0xFFFFC20000034A08 irq 177
ata1: SATA link up 1.5 Gbps (SStatus 113)
ata1: dev 0 cfg 49:2f00 82:746b 83:7f61 84:4023 85:7469 86:3c41 87:4023 88:207f
ata1: dev 0 ATA-7, max UDMA/133, 781422768 sectors: LBA48
ata1: dev 0 configured for UDMA/100
scsi0 : sata_sil
ata2: SATA link down (SStatus 0)
scsi1 : sata_sil
ata3: SATA link up 1.5 Gbps (SStatus 113)
ata3: dev 0 cfg 49:2f00 82:746b 83:7f61 84:4023 85:7469 86:3c41 87:4023 88:207f
ata3: dev 0 ATA-7, max UDMA/133, 781422768 sectors: LBA48
ata3: dev 0 configured for UDMA/100
scsi2 : sata_sil
ata4: SATA link down (SStatus 0)
scsi3 : sata_sil
Vendor: ATA Model: WDC WD4000YR-01P Rev: 01.0
Type: Direct-Access ANSI SCSI revision: 05
Vendor: ATA Model: WDC WD4000YR-01P Rev: 01.0
Type: Direct-Access ANSI SCSI revision: 05
ACPI: PCI Interrupt 0000:05:04.0[A] -> GSI 18 (level, low) -> IRQ 50
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[50] MMIO=[92004000-920047ff]
Max Packet=[2048] IR/IT contexts=[4/8]
ata_piix 0000:00:1f.2: version 1.05
ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 233
PCI: Setting latency timer of device 0000:00:1f.2 to 64
ata5: SATA max UDMA/133 cmd 0x30C8 ctl 0x30E6 bmdma 0x30A0 irq 233
ata6: SATA max UDMA/133 cmd 0x30C0 ctl 0x30E2 bmdma 0x30A8 irq 233
SCSI device sda: 781422768 512-byte hdwr sectors (400088 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
SCSI device sda: 781422768 512-byte hdwr sectors (400088 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
sda: sda1 sda2 sda3 < sda5 sda6 >
sd 0:0:0:0: Attached scsi disk sda
SCSI device sdb: 781422768 512-byte hdwr sectors (400088 MB)
sdb: Write Protect is off
sdb: Mode Sense: 00 3a 00 00
SCSI device sdb: drive cache: write back
SCSI device sdb: 781422768 512-byte hdwr sectors (400088 MB)
sdb: Write Protect is off
sdb: Mode Sense: 00 3a 00 00
SCSI device sdb: drive cache: write back
sdb: sdb1 sdb2 sdb3 < sdb5 sdb6 >
sd 2:0:0:0: Attached scsi disk sdb
ata5: dev 0 cfg 49:2f00 82:746b 83:7f61 84:4023 85:7469 86:3c41 87:4023 88:207f
ata5: dev 0 ATA-7, max UDMA/133, 781422768 sectors: LBA48
ata5: dev 1 cfg 49:2f00 82:746b 83:7f61 84:4023 85:7469 86:3c41 87:4023 88:207f
ata5: dev 1 ATA-7, max UDMA/133, 781422768 sectors: LBA48
ata5: dev 0 configured for UDMA/133
ata5: dev 1 configured for UDMA/133
scsi4 : ata_piix
ata6: SATA port has no device.
scsi5 : ata_piix
Vendor: ATA Model: WDC WD4000YR-01P Rev: 01.0
Type: Direct-Access ANSI SCSI revision: 05
SCSI device sdc: 781422768 512-byte hdwr sectors (400088 MB)
sdc: Write Protect is off
sdc: Mode Sense: 00 3a 00 00
SCSI device sdc: drive cache: write back
SCSI device sdc: 781422768 512-byte hdwr sectors (400088 MB)
sdc: Write Protect is off
sdc: Mode Sense: 00 3a 00 00
SCSI device sdc: drive cache: write back
sdc: sdc1 sdc2 sdc3 < sdc5 sdc6 >
sd 4:0:0:0: Attached scsi disk sdc
Vendor: ATA Model: WDC WD4000YR-01P Rev: 01.0
Type: Direct-Access ANSI SCSI revision: 05
SCSI device sdd: 781422768 512-byte hdwr sectors (400088 MB)
sdd: Write Protect is off
sdd: Mode Sense: 00 3a 00 00
SCSI device sdd: drive cache: write back
SCSI device sdd: 781422768 512-byte hdwr sectors (400088 MB)
sdd: Write Protect is off
sdd: Mode Sense: 00 3a 00 00
SCSI device sdd: drive cache: write back
sdd: sdd1 sdd2 sdd3 < sdd5 sdd6 >
sd 4:0:1:0: Attached scsi disk sdd
ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 17 (level, low) -> IRQ 177
PCI: Setting latency timer of device 0000:04:00.0 to 64
e1000: 0000:04:00.0: e1000_probe: (PCI Express:2.5Gb/s:Width x1)
00:16:76:8e:df:38
e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
ICH7: IDE controller at PCI slot 0000:00:1f.1
ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 50
ICH7: chipset revision 1
ICH7: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x30b0-0x30b7, BIOS settings: hda:DMA, hdb:pio
Probing IDE interface ide0...
ieee1394: Host added: ID:BUS[0-00:1023] GUID[0090270001a9c40f]
hda: HL-DT-ST DVDRAM GSA-H10N, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: ATAPI 48X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
Probing IDE interface ide1...
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
md: raid1 personality registered for level 1
md: md1 stopped.
md: bind<sdb2>
md: bind<sdd2>
md: bind<sdc2>
md: bind<sda2>
raid1: raid set md1 active with 4 out of 4 mirrors
EXT3-fs: INFO: recovery required on readonly filesystem.
EXT3-fs: write access will be enabled during recovery.
kjournald starting. Commit interval 5 seconds
EXT3-fs: md1: orphan cleanup on readonly fs
ext3_orphan_cleanup: deleting unreferenced inode 374973
ext3_orphan_cleanup: deleting unreferenced inode 374945
EXT3-fs: md1: 2 orphan inodes deleted
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
input: PC Speaker as /class/input/input1
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
hw_random hardware driver 1.0.0 loaded
pnp: the driver 'parport_pc' has been registered
pnp: match found with the PnP device '00:08' and the driver 'parport_pc'
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378 (0x778), irq 7, using FIFO
[PCSPP,TRISTATE,COMPAT,ECP]
eth1394: eth0: IEEE-1394 IPv4 over 1394 Ethernet (fw-host0)
EXT3 FS on md1, internal journal
loop: loaded (max 8 devices)
ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1)
ieee1394: sbp2: Try serialize_io=0 for better performance
device-mapper: 4.6.0-ioctl (2006-02-17) initialised: [EMAIL PROTECTED]
md: md0 stopped.
md: bind<sdb1>
md: bind<sdd1>
md: bind<sdc1>
md: bind<sda1>
raid1: raid set md0 active with 4 out of 4 mirrors
md: md2 stopped.
md: bind<sdb5>
md: bind<sdd5>
md: bind<sdc5>
md: bind<sda5>
raid1: raid set md2 active with 4 out of 4 mirrors
md: md3 stopped.
md: bind<sdb6>
md: bind<sdd6>
md: bind<sdc6>
md: bind<sda6>
raid5: automatically using best checksumming function: generic_sse
generic_sse: 4277.000 MB/sec
raid5: using function: generic_sse (4277.000 MB/sec)
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
raid5: device sda6 operational as raid disk 0
raid5: device sdc6 operational as raid disk 3
raid5: device sdd6 operational as raid disk 2
raid5: device sdb6 operational as raid disk 1
raid5: allocated 4262kB for md3
raid5: raid level 5 set md3 active with 4 out of 4 devices, algorithm 2
RAID5 conf printout:
--- rd:4 wd:4 fd:0
disk 0, o:1, dev:sda6
disk 1, o:1, dev:sdb6
disk 2, o:1, dev:sdd6
disk 3, o:1, dev:sdc6
kjournald starting. Commit interval 5 seconds
EXT3 FS on md0, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Adding 1959800k swap on /dev/md2. Priority:-1 extents:1 across:1959800k
ACPI: Power Button (FF) [PWRF]
ACPI: Sleep Button (CM) [SLPB]
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
IPv6 over IPv4 tunneling driver
ADDRCONF(NETDEV_UP): eth1: link is not ready
e1000: eth1: e1000_watchdog_task: NIC Link is Up 100 Mbps Full Duplex
e1000: eth1: e1000_watchdog_task: 10/100 speed: disabling TSO
ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
eth1: no IPv6 routers present
SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no
debug enabled
SGI XFS Quota Management subsystem
Filesystem "md3": Disabling barriers, not supported by the underlying device
XFS mounting filesystem md3
Starting XFS recovery on filesystem: md3 (logdev: internal)
Unable to handle kernel NULL pointer dereference at 0000000000000000 RIP:
<ffffffff802a12c7>{page_to_pfn+0}
PGD 77cd8067 PUD 79744067 PMD 0
Oops: 0000 [1] SMP
CPU 1
Modules linked in: xfs ipv6 button ac battery raid5 xor dm_snapshot dm_mirror
dm_mod sbp2 loop eth1394 i2c_i801 parport_pc parport hw_random i2c_core psmouse
serio_raw evdev floppy pcspkr ext3 jbd mbcache raid1 md_mod ide_generic ide_cd
cdrom sd_mod piix ata_piix e1000 ohci1394 ieee1394 sata_sil libata scsi_mod
uhci_hcd generic ide_core ehci_hcd thermal processor fan
Pid: 4587, comm: mount Not tainted 2.6.17-2-amd64 #1
RIP: 0010:[<ffffffff802a12c7>] <ffffffff802a12c7>{page_to_pfn+0}
RSP: 0018:ffff81007b347790 EFLAGS: 00010246
RAX: ffff810078d21480 RBX: 0000000000000000 RCX: 0000001000000000
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
RBP: ffff810079067200 R08: 0000000100000001 R09: 0000000000004001
R10: ffff810078d21300 R11: 0000000000000190 R12: ffff810078d21300
R13: 0000000000000000 R14: ffff810077817800 R15: 0000000000000000
FS: 00002b5835607bc0(0000) GS:ffff81007fe8b6c0(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
CR2: 0000000000000000 CR3: 0000000078603000 CR4: 00000000000006e0
Process mount (pid: 4587, threadinfo ffff81007b346000, task ffff81007f790a60)
Stack: ffffffff8830665b ffff810079067340 ffffffff882f1b1d ffff810001f8ff00
0000000200000000 ffff8100790674c0 ffff810037ed4200 0000000000001000
0000000000000008 0000000000000000
Call Trace: <ffffffff8830665b>{:xfs:xfs_buf_offset+58}
<ffffffff882f1b1d>{:xfs:xlog_recover_commit_trans+1607}
<ffffffff80231367>{submit_bio+184}
<ffffffff882f2729>{:xfs:xlog_recover_process_data+466}
<ffffffff882f31c6>{:xfs:xlog_do_recovery_pass+585}
<ffffffff882f46f4>{:xfs:xlog_recover+243}
<ffffffff882f0b2f>{:xfs:xfs_log_mount+1310}
<ffffffff882f6671>{:xfs:xfs_mountfs+2116}
<ffffffff882fc9ae>{:xfs:xfs_mount+1900}
<ffffffff8830bbb2>{:xfs:xfs_fs_fill_super+126}
<ffffffff802bbfdb>{get_filesystem+18} <ffffffff802b52ef>{sget+850}
<ffffffff802b4c48>{set_bdev_super+0}
<ffffffff802b4c57>{test_bdev_super+0}
<ffffffff802b5dcf>{bd_claim+24} <ffffffff802b5979>{get_sb_bdev+239}
<ffffffff8830bb34>{:xfs:xfs_fs_fill_super+0}
<ffffffff802b55e8>{do_kern_mount+157}
<ffffffff802bd82c>{do_mount+1676} <ffffffff8022b2c9>{mntput_no_expire+25}
<ffffffff80220571>{__up_read+19} <ffffffff8020a699>{do_page_fault+1151}
<ffffffff8020878d>{__handle_mm_fault+1276}
<ffffffff8025a7a1>{error_exit+0}
<ffffffff80249b2d>{sys_mount+138} <ffffffff80259b0e>{system_call+126}
Code: 48 8b 07 48 c1 e8 3a 48 8b 14 c5 e0 56 51 80 48 b8 b7 6d db
RIP <ffffffff802a12c7>{page_to_pfn+0} RSP <ffff81007b347790>
CR2: 0000000000000000
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
