Control: reassign -1 src:linux 4.19.67-2+deb10u2 On Sb, 18 ian 20, 16:20:53, Jesse57901 wrote: > Package: kernel > Version: Linux debian 4.19.0-6-amd64 #1 SMP Debian 4.19.67-2+deb10u2 > (2019-11-11) x86_64 GNU/Linux > > I'm having the same problem on 2 different computers when I install Debian > 10. The problem is that the system is not detecting any wifi hardware. I have > downloaded the correct firmware files (firmware-b43-installer and > firmware-iwlwifi) and they are located in the /lib/firmware directory. When I > run command 'ip link show' it does not detect any wifi hardware and only > shows lo and enp9s0(ethernet) . When I use various network managers like > connman and wicd they are not detecting any wifi hardware. I ran a dmesg > command and it says it cannot load the firmware and indicates it is missing > but everything appears to be installed correctly. Here is the terminal output > for dmesg: > > 9.161602] b43-phy0: Broadcom 4312 WLAN found (core revision 15) > [ 9.207735] b43-phy0: Found PHY: Analog 6, Type 5 (LP), Revision 1 > [ 9.207750] b43-phy0: Found Radio: Manuf 0x17F, ID 0x2062, Revision 2, > Version 0 > [ 9.224592] Broadcom 43xx driver loaded [ Features: PNLS ] > [ 9.227035] Adding 2685948k swap on /dev/sdb5. Priority:-2 extents:1 > across:2685948k FS > [ 9.231785] b43 ssb0:0: firmware: failed to load b43/ucode15.fw (-2) > [ 9.231841] firmware_class: See https://wiki.debian.org/Firmware for > information about missing firmware > [ 9.231889] b43 ssb0:0: Direct firmware load for b43/ucode15.fw failed > with error -2 > [ 9.232354] b43 ssb0:0: firmware: failed to load b43/ucode15.fw (-2) > [ 9.232401] b43 ssb0:0: Direct firmware load for b43/ucode15.fw failed > with error -2 > [ 9.232441] b43 ssb0:0: firmware: failed to load b43-open/ucode15.fw (-2) > [ 9.232478] b43 ssb0:0: Direct firmware load for b43-open/ucode15.fw > failed with error -2 > [ 9.232492] b43 ssb0:0: firmware: failed to load b43-open/ucode15.fw (-2) > [ 9.232527] b43 ssb0:0: Direct firmware load for b43-open/ucode15.fw > failed with error -2 > [ 9.232531] b43-phy0 ERROR: You must go to > http://wireless.kernel.org/en/users/Drivers/b43#devicefirmware and download > the correct firmware for this driver version. Please carefully read all > instructions on this website. > > Now here are the files located in /lib/firmware/b43: > a0g0bsinitvals5.fw n0bsinitvals22.fw > a0g0bsinitvals9.fw n0bsinitvals24.fw > a0g0initvals5.fw n0bsinitvals25.fw > a0g0initvals9.fw n0initvals11.fw > a0g1bsinitvals13.fw n0initvals16.fw > a0g1bsinitvals5.fw n0initvals17.fw > a0g1bsinitvals9.fw n0initvals22.fw > a0g1initvals13.fw n0initvals24.fw > a0g1initvals5.fw n0initvals25.fw > a0g1initvals9.fw n16bsinitvals30.fw > b0g0bsinitvals13.fw n16initvals30.fw > b0g0bsinitvals5.fw n18bsinitvals32.fw > b0g0bsinitvals9.fw n18initvals32.fw > b0g0initvals13.fw n1bsinitvals20.fw > b0g0initvals5.fw n1initvals20.fw > b0g0initvals9.fw n2bsinitvals19.fw > firmware-b43-installer.catalog n2initvals19.fw > ht0bsinitvals26.fw pcm5.fw > ht0bsinitvals29.fw sslpn0bsinitvals16.fw > ht0initvals26.fw sslpn0initvals16.fw > ht0initvals29.fw sslpn1bsinitvals20.fw > lcn0bsinitvals24.fw sslpn1bsinitvals27.fw > lcn0bsinitvals25.fw sslpn1initvals20.fw > lcn0bsinitvals26.fw sslpn1initvals27.fw > lcn0initvals24.fw sslpn2bsinitvals19.fw > lcn0initvals25.fw sslpn2initvals19.fw > lcn0initvals26.fw sslpn3bsinitvals21.fw > lcn1bsinitvals24.fw sslpn3initvals21.fw > lcn1bsinitvals25.fw sslpn4bsinitvals22.fw > lcn1bsinitvals26.fw sslpn4initvals22.fw > lcn1initvals24.fw ucode11.fw > lcn1initvals25.fw ucode13.fw > lcn1initvals26.fw ucode14.fw > lcn2bsinitvals24.fw ucode15.fw > lcn2bsinitvals25.fw ucode16_lp.fw > lcn2bsinitvals26.fw ucode16_mimo.fw > lcn2initvals24.fw ucode16_sslpn.fw > lcn2initvals25.fw ucode16_sslpn_nobt.fw > lcn2initvals26.fw ucode17_mimo.fw > lcn400bsinitvals33.fw ucode19_sslpn.fw > lcn400initvals33.fw ucode19_sslpn_nobt.fw > lp0bsinitvals13.fw ucode20_sslpn.fw > lp0bsinitvals14.fw ucode20_sslpn_nobt.fw > lp0bsinitvals15.fw ucode21_sslpn.fw > lp0bsinitvals16.fw ucode21_sslpn_nobt.fw > lp0initvals13.fw ucode22_mimo.fw > lp0initvals14.fw ucode22_sslpn.fw > lp0initvals15.fw ucode24_lcn.fw > lp0initvals16.fw ucode24_mimo.fw > lp1bsinitvals20.fw ucode25_lcn.fw > lp1bsinitvals22.fw ucode25_mimo.fw > lp1initvals20.fw ucode26_mimo.fw > lp1initvals22.fw ucode27_sslpn.fw > lp2bsinitvals19.fw ucode29_mimo.fw > lp2initvals19.fw ucode30_mimo.fw > n0absinitvals11.fw ucode32_mimo.fw > n0bsinitvals11.fw ucode33_lcn40.fw > n0bsinitvals16.fw ucode5.fw > n0bsinitvals17.fw ucode9.fw > These are the files downloaded using apt-get install firmware-b43-installer. > > I also tried installing the firmware-b43legacy-installer package to no avail. > I have my repositories set to non-free. I have the same problem with my other > computer when trying to use intel firmware in the iwlwifi packages. > > Computer 1: Dell Inspiron 1545 ; Network controller: Broadcom Limited BCM4312 > 802.11b/g LP-PHY > > Computer 2: HP Elitebook 6460p ; Network controller: Intel Corporation > Centrino Advanced-N 6205 > > Linux Kernel: Linux debian 4.19.0-6-amd64 #1 SMP Debian 4.19.67-2+deb10u2 > (2019-11-11) x86_64 GNU/Linux
-- http://wiki.debian.org/FAQsFromDebianUser
signature.asc
Description: PGP signature
