Package: src:linux
Version: 5.4.8-1
Severity: important

Dear Maintainer,

After switching from linux-image-5.3.0-3-amd64:5.3.15-1 to
linux-image-5.4.0-2-amd64:5.4.8-1 cryptsetup is unable to unlock my / partition.
Switching back to linux-image-5.3.0-3-amd64 allow to unlock the partition and
boot. When booting in not quiet mode (recovery mode) I get the following
messages:

[    4.931479] device-mapper: uevent: version 1.0.3
[    4.932672] device-mapper: ioctl: 4.41.0-ioctl (2019-09-16) initialised: 
dm-de...@redhat.com
Please unlock disk sda7:
[   23.294803] random: cryptsetup: unitialized urandom read (2 bytes read)
[   23.319434] device-mapper: table: 254:0: crypt: Error allocating crypto tfm
[   23.319534] device-mapper: ioctl: error adding target to table
device-mapper: reload ioctl on  failed: No such file or directory
cryptsetup: ERROR: sda7: cryptsetup failed, bad password or options?
Please unlock disk sda7:

Here is the output of cryptsetup luksDump /dev/sda7:

LUKS header information for /dev/sda7

Version:        1
Cipher name:    aes
Cipher mode:    cbc-essiv:sha256
Hash spec:      sha1
Payload offset: 1032
MK bits:        128
MK digest:      xx
MK salt:        xx
                
MK iterations:  10
UUID:           701a1cd7-7c2f-4489-ba90-54ed0930606e

Key Slot 0: ENABLED
        Iterations:             44212
        Salt:                   xx
        Key material offset:    8
        AF stripes:             4000
Key Slot 1: DISABLED
...
Key Slot 7: DISABLED


-- Package-specific info:
** Kernel log: boot messages should be attached

** Model information
sys_vendor: ASUSTeK Computer INC.
product_name: 1001PX
product_version: x.x
chassis_vendor: ASUSTeK Computer INC.
chassis_version: x.x
bios_vendor: American Megatrends Inc.
bios_version: 1102   
board_vendor: ASUSTeK Computer INC.
board_name: 1001PX
board_version: x.xx

** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Atom Processor 
D4xx/D5xx/N4xx/N5xx DMI Bridge [8086:a010]
        Subsystem: ASUSTeK Computer Inc. Eee PC 1015PX [1043:83ac]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort+ >SERR- <PERR- INTx-
        Latency: 0
        Capabilities: <access denied>

00:02.0 VGA compatible controller [0300]: Intel Corporation Atom Processor 
D4xx/D5xx/N4xx/N5xx Integrated Graphics Controller [8086:a011] (prog-if 00 [VGA 
controller])
        Subsystem: ASUSTeK Computer Inc. Eee PC 1015PX [1043:83ac]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin A routed to IRQ 16
        Region 0: Memory at f7e00000 (32-bit, non-prefetchable) [size=512K]
        Region 1: I/O ports at dc00 [size=8]
        Region 2: Memory at d0000000 (32-bit, prefetchable) [size=256M]
        Region 3: Memory at f7d00000 (32-bit, non-prefetchable) [size=1M]
        [virtual] Expansion ROM at 000c0000 [disabled] [size=128K]
        Capabilities: <access denied>
        Kernel driver in use: i915

00:02.1 Display controller [0380]: Intel Corporation Atom Processor 
D4xx/D5xx/N4xx/N5xx Integrated Graphics Controller [8086:a012]
        Subsystem: ASUSTeK Computer Inc. Eee PC 1015PX [1043:83ac]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Region 0: Memory at f7e80000 (32-bit, non-prefetchable) [size=512K]
        Capabilities: <access denied>

00:1b.0 Audio device [0403]: Intel Corporation NM10/ICH7 Family High Definition 
Audio Controller [8086:27d8] (rev 02)
        Subsystem: ASUSTeK Computer Inc. Eee PC 1015PX [1043:8437]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 32 bytes
        Interrupt: pin A routed to IRQ 28
        Region 0: Memory at f7cf8000 (64-bit, non-prefetchable) [size=16K]
        Capabilities: <access denied>
        Kernel driver in use: snd_hda_intel

00:1c.0 PCI bridge [0604]: Intel Corporation NM10/ICH7 Family PCI Express Port 
1 [8086:27d0] (rev 02) (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR+ FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 32 bytes
        Interrupt: pin A routed to IRQ 24
        Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
        I/O behind bridge: 00001000-00001fff [size=4K]
        Memory behind bridge: 40000000-401fffff [size=2M]
        Prefetchable memory behind bridge: 0000000040200000-00000000403fffff 
[size=2M]
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort+ <SERR- <PERR-
        BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: <access denied>
        Kernel driver in use: pcieport

00:1c.1 PCI bridge [0604]: Intel Corporation NM10/ICH7 Family PCI Express Port 
2 [8086:27d2] (rev 02) (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR+ FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 32 bytes
        Interrupt: pin B routed to IRQ 25
        Bus: primary=00, secondary=02, subordinate=03, sec-latency=0
        I/O behind bridge: 00002000-00002fff [size=4K]
        Memory behind bridge: f8000000-fbffffff [size=64M]
        Prefetchable memory behind bridge: 00000000f0000000-00000000f6ffffff 
[size=112M]
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort+ <SERR- <PERR-
        BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: <access denied>
        Kernel driver in use: pcieport

00:1c.3 PCI bridge [0604]: Intel Corporation NM10/ICH7 Family PCI Express Port 
4 [8086:27d6] (rev 02) (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR+ FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 32 bytes
        Interrupt: pin D routed to IRQ 26
        Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
        I/O behind bridge: 0000e000-0000efff [size=4K]
        Memory behind bridge: f7f00000-f7ffffff [size=1M]
        Prefetchable memory behind bridge: 0000000040400000-00000000405fffff 
[size=2M]
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- <SERR- <PERR-
        BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: <access denied>
        Kernel driver in use: pcieport

00:1d.0 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB UHCI 
Controller #1 [8086:27c8] (rev 02) (prog-if 00 [UHCI])
        Subsystem: ASUSTeK Computer Inc. Eee PC 1015PX [1043:83ad]
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin A routed to IRQ 23
        Region 4: I/O ports at d400 [size=32]
        Kernel driver in use: uhci_hcd

00:1d.1 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB UHCI 
Controller #2 [8086:27c9] (rev 02) (prog-if 00 [UHCI])
        Subsystem: ASUSTeK Computer Inc. Eee PC 1015PX [1043:83ad]
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin B routed to IRQ 19
        Region 4: I/O ports at d480 [size=32]
        Kernel driver in use: uhci_hcd

00:1d.2 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB UHCI 
Controller #3 [8086:27ca] (rev 02) (prog-if 00 [UHCI])
        Subsystem: ASUSTeK Computer Inc. Eee PC 1015PX [1043:83ad]
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin C routed to IRQ 18
        Region 4: I/O ports at d800 [size=32]
        Kernel driver in use: uhci_hcd

00:1d.3 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB UHCI 
Controller #4 [8086:27cb] (rev 02) (prog-if 00 [UHCI])
        Subsystem: ASUSTeK Computer Inc. Eee PC 1015PX [1043:83ad]
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin D routed to IRQ 16
        Region 4: I/O ports at d880 [size=32]
        Kernel driver in use: uhci_hcd

00:1d.7 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB2 EHCI 
Controller [8086:27cc] (rev 02) (prog-if 20 [EHCI])
        Subsystem: ASUSTeK Computer Inc. Eee PC 1015PX [1043:83ad]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin A routed to IRQ 23
        Region 0: Memory at f7cf7c00 (32-bit, non-prefetchable) [size=1K]
        Capabilities: <access denied>
        Kernel driver in use: ehci-pci

00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge 
[8086:2448] (rev e2) (prog-if 01 [Subtractive decode])
        Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Bus: primary=00, secondary=05, subordinate=05, sec-latency=32
        I/O behind bridge: None
        Memory behind bridge: None
        Prefetchable memory behind bridge: None
        Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort+ <SERR- <PERR-
        BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: <access denied>

00:1f.0 ISA bridge [0601]: Intel Corporation NM10 Family LPC Controller 
[8086:27bc] (rev 02)
        Subsystem: ASUSTeK Computer Inc. Eee PC 1015PX [1043:83ad]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Capabilities: <access denied>
        Kernel driver in use: lpc_ich

00:1f.2 SATA controller [0106]: Intel Corporation NM10/ICH7 Family SATA 
Controller [AHCI mode] [8086:27c1] (rev 02) (prog-if 01 [AHCI 1.0])
        Subsystem: ASUSTeK Computer Inc. Eee PC 1015PX [1043:83ad]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin B routed to IRQ 27
        Region 0: I/O ports at d080 [size=8]
        Region 1: I/O ports at d000 [size=4]
        Region 2: I/O ports at cc00 [size=8]
        Region 3: I/O ports at c880 [size=4]
        Region 4: I/O ports at c800 [size=32]
        Region 5: Memory at f7cf7800 (32-bit, non-prefetchable) [size=1K]
        Capabilities: <access denied>
        Kernel driver in use: ahci

00:1f.3 SMBus [0c05]: Intel Corporation NM10/ICH7 Family SMBus Controller 
[8086:27da] (rev 02)
        Subsystem: ASUSTeK Computer Inc. NM10/ICH7 Family SMBus Controller 
[1043:83ad]
        Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Interrupt: pin B routed to IRQ 21
        Region 4: I/O ports at 0400 [size=32]

01:00.0 Ethernet controller [0200]: Qualcomm Atheros AR8132 Fast Ethernet 
[1969:1062] (rev c0)
        Subsystem: ASUSTeK Computer Inc. AR8132 Fast Ethernet [1043:838a]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 32 bytes
        Interrupt: pin A routed to IRQ 29
        Region 0: Memory at f7fc0000 (64-bit, non-prefetchable) [size=256K]
        Region 2: I/O ports at ec00 [size=128]
        Capabilities: <access denied>
        Kernel driver in use: atl1c

02:00.0 Network controller [0280]: Qualcomm Atheros AR9285 Wireless Network 
Adapter (PCI-Express) [168c:002b] (rev 01)
        Subsystem: AzureWave AW-NE785 / AW-NE785H 802.11bgn Wireless Full or 
Half-size Mini PCIe Card [1a3b:1089]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 17
        Region 0: Memory at f8000000 (64-bit, non-prefetchable) [size=64K]
        Capabilities: <access denied>
        Kernel driver in use: ath9k


** USB devices:
Bus 005 Device 002: ID 13d3:5702 IMC Networks UVC VGA Webcam
Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub


-- System Information:
Debian Release: bullseye/sid
  APT prefers testing
  APT policy: (500, 'testing'), (10, 'unstable')
Architecture: amd64 (x86_64)
Foreign Architectures: i386

Kernel: Linux 5.3.0-3-amd64 (SMP w/2 CPU cores)
Locale: LANG=fr_FR.utf8, LC_CTYPE=fr_FR.utf8 (charmap=UTF-8), 
LANGUAGE=fr_FR.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)

Versions of packages linux-image-5.4.0-2-amd64 depends on:
ii  initramfs-tools [linux-initramfs-tool]  0.135
ii  kmod                                    26+20191223-1
ii  linux-base                              4.6

Versions of packages linux-image-5.4.0-2-amd64 recommends:
pn  apparmor             <none>
ii  firmware-linux-free  3.4

Versions of packages linux-image-5.4.0-2-amd64 suggests:
pn  debian-kernel-handbook  <none>
ii  grub-pc                 2.04-5
pn  linux-doc-5.4           <none>

Versions of packages linux-image-5.4.0-2-amd64 is related to:
pn  firmware-amd-graphics     <none>
ii  firmware-atheros          20190717-2
pn  firmware-bnx2             <none>
pn  firmware-bnx2x            <none>
pn  firmware-brcm80211        <none>
pn  firmware-cavium           <none>
pn  firmware-intel-sound      <none>
pn  firmware-intelwimax       <none>
pn  firmware-ipw2x00          <none>
pn  firmware-ivtv             <none>
pn  firmware-iwlwifi          <none>
pn  firmware-libertas         <none>
pn  firmware-linux-nonfree    <none>
pn  firmware-misc-nonfree     <none>
pn  firmware-myricom          <none>
pn  firmware-netxen           <none>
pn  firmware-qlogic           <none>
pn  firmware-realtek          <none>
pn  firmware-samsung          <none>
pn  firmware-siano            <none>
pn  firmware-ti-connectivity  <none>
pn  xen-hypervisor            <none>

-- no debconf information

Reply via email to