Your message dated Sun, 07 Feb 2016 22:43:09 +0000 with message-id <E1aSY2v-0006Hr-2Z@deadeye> and subject line Closing bugs assigned to linux-2.6 package has caused the Debian Bug report #658727, regarding [3.0 -> 3.1 regression] 3w-9xxx abnormally slows the system down to be marked as done.
This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact ow...@bugs.debian.org immediately.) -- 658727: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=658727 Debian Bug Tracking System Contact ow...@bugs.debian.org with problems
--- Begin Message ---Package: linux-2.6 Version: 3.1.8-2 Severity: important Tags: d-i upstream Dear Sirs, first of all thank You for all the efforts making Debian GNU/Linux what it is today. It has definitely come a long way since my first encounter with rex. At first it seemed that I have found a bug in GNU Parted in the beta Debian Installer (debian-testing-amd-xfce+lxde-CD-1.iso dated 2012-01-30 05:54) as it cheerfully greeted me that I have found a bug in it. The important part of the message was: “Unable to determine the size and length of /dev/sd[a-b][0-6]” (the 3ware controller has a RAID-1 and a RAID-5 (256 KiB stripe size) unit and I created maximum 6 partitions, I created GPT disk labels). Generally the installer felt rather slow especially after the above mentioned error message(s). After loosing several days with the wheezy installer I had a hunch that I should try squeeze's one for the partitioning. As the partitioning went without a hiccup (resulting in aligned partition thanks to using MiB as unit in parted) I've returned to the beta installer and the difference was imminent while waiting looking on the progression bar on the disk and partition detecting sections. Therefore I decided having wheezy later and returned to the squeeze installer which felt (the usual GNU/Linux) lightning fast (although I must confess that only ssh server task was selected). After a reboot I've made the dist-upgrade of the just installed base system, and struck the recognition that it was the Linux kernel, not the beta Debian Installer that caused me so much pain. Nevertheless I've already started the dist-upgrade on my notebook, and there was no way to return. However to my surprise by the time the machine with the 3ware controller finished booting so did the notebook with the wheezy system. This was surprising because the system on the notebook can't be accused being a fresh base system. The vastly different experience with the notebook shed the light on the specific reason of the system with the 3ware controller being sluggishly slow. I've searched the Internet and found an e-mail sent by Russell L. CARTER to the debian-user list (2011-12-02 08:51 UTC-7, subject: 3w-9xxx performance bug in kernel 3.1.0-amd64 – http://list.debian.org/debian-user/2011/12/msg00153.html) describing the exact same problem. However it seems that for whatever reasons he didn't reported the bug. With returning to the kernel in linux-image-2.6.32-5-amd64 also did the speed. This also confirms that the speed degradation with 3.1.0-1-amd64 kernel has nothing to do with creating optimised XFS file system (mkfs.xfs -d sunit=512, swidth=1024 -i size=512 -l sunit=512 -s size=512 -L given-label /dev/sdb1) on top of an aligned (using the “–dataalignment 1024s” option in pvcreate) LVM volume. I think that the time required for booting speaks to itself: while with the older kernel it takes 25 seconds from Grub 2 to have a login shell with the new one it takes 29 minutes (I exaggerated: actually it takes 15 second less than that). I thank You in anticipation for Your efforts in solving this deal breaker problem for 3ware 9000 series controller users or if it is not possible, than when the time comes please add it to the errata of the wheezy release. Yours truly, Csaba GAAL -- Package-specific info: ** Version: Linux version 3.1.0-1-amd64 (Debian 3.1.8-2) (b...@decadent.org.uk) (gcc version 4.6.2 (Debian 4.6.2-11) ) #1 SMP Tue Jan 10 05:01:58 UTC 2012 ** Command line: BOOT_IMAGE=/vmlinuz-3.1.0-1-amd64 root=UUID=6c6a0901-0353-4b01-8f59-d52dd52976b8 ro quiet ** Not tainted ** Kernel log: [ 46.184463] [drm] radeon: irq initialized. [ 46.187278] [drm] Detected VRAM RAM=128M, BAR=128M [ 46.187281] [drm] RAM width 16bits DDR [ 46.187361] [TTM] Zone kernel: Available graphics memory: 2030744 kiB. [ 46.187362] [TTM] Initializing pool allocator. [ 46.187396] [drm] radeon: 32M of VRAM memory ready [ 46.187397] [drm] radeon: 512M of GTT memory ready. [ 46.187417] [drm] GART: num cpu pages 131072, num gpu pages 131072 [ 46.208648] radeon 0000:01:05.0: WB enabled [ 46.208693] [drm] Loading R100 Microcode [ 47.176437] [drm] radeon: ring at 0x00000000C0001000 [ 47.176461] [drm] ring test succeeded in 2 usecs [ 47.176562] [drm] radeon: ib pool ready. [ 47.176624] [drm] ib test succeeded in 0 usecs [ 47.176768] [drm] No valid Ext TMDS info found in BIOS [ 47.176797] [drm] Radeon Display Connectors [ 47.176799] [drm] Connector 0: [ 47.176800] [drm] VGA [ 47.176802] [drm] DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60 [ 47.176803] [drm] Encoders: [ 47.176804] [drm] CRT1: INTERNAL_DAC1 [ 47.176805] [drm] Connector 1: [ 47.176806] [drm] DVI-D [ 47.176807] [drm] HPD2 [ 47.176809] [drm] DDC: 0x64 0x64 0x64 0x64 0x64 0x64 0x64 0x64 [ 47.176810] [drm] Encoders: [ 47.176812] [drm] DFP2: INTERNAL_DVO1 [ 47.229121] [drm] Radeon display connector VGA-1: Found valid EDID [ 47.238890] [drm] Radeon display connector DVI-D-1: No monitor connected or invalid EDID [ 47.307238] [drm] fb mappable at 0xE0040000 [ 47.307240] [drm] vram apper at 0xE0000000 [ 47.307241] [drm] size 1310720 [ 47.307242] [drm] fb depth is 8 [ 47.307243] [drm] pitch is 1280 [ 47.307308] fbcon: radeondrmfb (fb0) is primary device [ 47.472277] Console: switching to colour frame buffer device 160x64 [ 47.484656] fb0: radeondrmfb frame buffer device [ 47.484658] drm: registered panic notifier [ 47.484662] [drm] Initialized radeon 2.11.0 20080528 for 0000:01:05.0 on minor 0 [ 104.076310] Intel AES-NI instructions are not detected. [ 104.576172] padlock_aes: VIA PadLock not detected. [ 105.176178] padlock_sha: VIA PadLock Hash Engine not detected. [ 134.477458] loop: module loaded [ 135.576289] w83627hf: w83627hf: Found W83627THF chip at 0x290 [ 213.680234] Adding 2228220k swap on /dev/mapper/sda3_crypt. Priority:-1 extents:1 across:2228220k [ 238.284028] XFS (sda2): Mounting Filesystem [ 445.388026] XFS (sda2): Ending clean mount [ 445.588028] XFS (dm-1): Mounting Filesystem [ 448.188025] XFS (dm-1): Ending clean mount [ 448.388027] XFS (dm-3): Mounting Filesystem [ 450.788076] XFS (dm-3): Ending clean mount [ 450.988026] XFS (dm-4): Mounting Filesystem [ 453.388025] XFS (dm-4): Ending clean mount [ 453.588025] XFS (dm-2): Mounting Filesystem [ 660.896026] XFS (dm-2): Ending clean mount [ 661.096033] XFS (dm-5): Mounting Filesystem [ 663.696028] XFS (dm-5): Ending clean mount [ 663.896027] XFS (dm-8): Mounting Filesystem [ 871.296039] XFS (dm-8): Ending clean mount [ 871.496026] XFS (dm-7): Mounting Filesystem [ 886.596024] XFS (dm-7): Ending clean mount [ 886.896029] XFS (dm-9): Mounting Filesystem [ 1094.404025] XFS (dm-9): Ending clean mount [ 1094.704044] XFS (dm-6): Mounting Filesystem [ 1302.116025] XFS (dm-6): Ending clean mount [ 1302.316026] XFS (dm-10): Mounting Filesystem [ 1360.216027] XFS (dm-10): Ending clean mount [ 1360.416028] XFS (dm-11): Mounting Filesystem [ 1364.416025] XFS (dm-11): Ending clean mount [ 1364.716029] XFS (dm-12): Mounting Filesystem [ 1572.216025] XFS (dm-12): Ending clean mount [ 1572.516034] XFS (dm-13): Mounting Filesystem [ 1575.116025] XFS (dm-13): Ending clean mount [ 1575.316026] XFS (dm-14): Mounting Filesystem [ 1588.116025] XFS (dm-14): Ending clean mount [ 1588.316026] XFS (dm-15): Mounting Filesystem [ 1591.516027] XFS (dm-15): Ending clean mount [ 1591.716028] XFS (dm-16): Mounting Filesystem [ 1631.316025] XFS (dm-16): Ending clean mount [ 1631.516040] XFS (dm-17): Mounting Filesystem [ 1633.916025] XFS (dm-17): Ending clean mount [ 1641.470850] tg3 0000:05:00.0: irq 46 for MSI/MSI-X [ 1641.516590] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 1643.067435] tg3 0000:05:00.0: eth1: Link is up at 100 Mbps, full duplex [ 1643.067438] tg3 0000:05:00.0: eth1: Flow control is on for TX and on for RX [ 1643.067921] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready [ 1647.222786] RPC: Registered named UNIX socket transport module. [ 1647.222789] RPC: Registered udp transport module. [ 1647.222791] RPC: Registered tcp transport module. [ 1647.222792] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1648.020623] FS-Cache: Loaded [ 1648.622861] FS-Cache: Netfs 'nfs' registered for caching [ 1649.021209] Installing knfsd (copyright (C) 1996 o...@monad.swb.de). [ 1653.408004] eth1: no IPv6 routers present [ 1679.424317] powernow-k8: Found 1 AMD Processor model unknown (4 cpu cores) (version 2.20.00) [ 1679.424358] powernow-k8: 0 : pstate 0 (2800 MHz) [ 1679.424360] powernow-k8: 1 : pstate 1 (2100 MHz) [ 1679.424361] powernow-k8: 2 : pstate 2 (1600 MHz) [ 1679.424363] powernow-k8: 3 : pstate 3 (800 MHz) [ 7335.428019] 3w-9xxx: scsi0: AEN: INFO (0x04:0x000C): Initialize started:unit=0. ** Model information sys_vendor: ASUSTek Computer INC. product_name: M2N-LR product_version: Rev 1.xx chassis_vendor: ASUSTek Computer INC. chassis_version: Rev 1.xx bios_vendor: American Megatrends Inc. bios_version: 0515 board_vendor: ASUSTeK Computer INC. board_name: M2N-LR board_version: Rev 1.xx ** Loaded modules: powernow_k8 mperf cpufreq_stats cpufreq_userspace cpufreq_powersave cpufreq_conservative nfsd nfs lockd fscache auth_rpcgss nfs_acl sunrpc w83792d w83627hf hwmon_vid loop sha256_generic cryptd aes_x86_64 aes_generic cbc dm_crypt radeon ttm nv_tco drm_kms_helper snd_pcm drm snd_timer snd i2c_nforce2 amd64_edac_mod soundcore i2c_algo_bit tpm_infineon edac_core shpchp snd_page_alloc pci_hotplug k10temp i2c_core power_supply tpm_tis edac_mce_amd tpm pcspkr processor button tpm_bios evdev thermal_sys xfs dm_mod sd_mod crc_t10dif sr_mod cdrom ohci_hcd ata_generic sata_nv 3w_9xxx pata_amd tg3 libphy ehci_hcd libata usbcore scsi_mod ** PCI devices: 00:00.0 RAM memory [0500]: nVidia Corporation MCP55 Memory Controller [10de:0369] (rev a2) Subsystem: ASUSTeK Computer Inc. Device [1043:8239] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> 00:01.0 ISA bridge [0601]: nVidia Corporation MCP55 LPC Bridge [10de:0360] (rev a3) Subsystem: ASUSTeK Computer Inc. Device [1043:8239] Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Region 0: I/O ports at 2f00 [size=128] 00:01.1 SMBus [0c05]: nVidia Corporation MCP55 SMBus [10de:0368] (rev a3) Subsystem: ASUSTeK Computer Inc. Device [1043:8239] Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin A routed to IRQ 11 Region 0: I/O ports at 2900 [size=64] Region 4: I/O ports at 2a00 [size=64] Region 5: I/O ports at 2a80 [size=64] Capabilities: <access denied> Kernel driver in use: nForce2_smbus 00:02.0 USB controller [0c03]: nVidia Corporation MCP55 USB Controller [10de:036c] (rev a1) (prog-if 10 [OHCI]) Subsystem: ASUSTeK Computer Inc. Device [1043:8239] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 (750ns min, 250ns max) Interrupt: pin A routed to IRQ 22 Region 0: Memory at efbbf000 (32-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: ohci_hcd 00:02.1 USB controller [0c03]: nVidia Corporation MCP55 USB Controller [10de:036d] (rev a2) (prog-if 20 [EHCI]) Subsystem: ASUSTeK Computer Inc. Device [1043:8239] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 (750ns min, 250ns max) Interrupt: pin B routed to IRQ 23 Region 0: Memory at feb00000 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:04.0 IDE interface [0101]: nVidia Corporation MCP55 IDE [10de:036e] (rev a1) (prog-if 8a [Master SecP PriP]) Subsystem: ASUSTeK Computer Inc. Device [1043:8239] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 (750ns min, 250ns max) Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8] Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [size=1] Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8] Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [size=1] Region 4: I/O ports at ffa0 [size=16] Capabilities: <access denied> Kernel driver in use: pata_amd 00:05.0 IDE interface [0101]: nVidia Corporation MCP55 SATA Controller [10de:037f] (rev a3) (prog-if 85 [Master SecO PriO]) Subsystem: ASUSTeK Computer Inc. Device [1043:8239] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 (750ns min, 250ns max) Interrupt: pin A routed to IRQ 22 Region 0: I/O ports at c400 [size=8] Region 1: I/O ports at c080 [size=4] Region 2: I/O ports at c000 [size=8] Region 3: I/O ports at bc00 [size=4] Region 4: I/O ports at b880 [size=16] Region 5: Memory at efbbd000 (32-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: sata_nv 00:05.1 IDE interface [0101]: nVidia Corporation MCP55 SATA Controller [10de:037f] (rev a3) (prog-if 85 [Master SecO PriO]) Subsystem: ASUSTeK Computer Inc. Device [1043:8239] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 (750ns min, 250ns max) Interrupt: pin B routed to IRQ 21 Region 0: I/O ports at b800 [size=8] Region 1: I/O ports at b480 [size=4] Region 2: I/O ports at b400 [size=8] Region 3: I/O ports at b080 [size=4] Region 4: I/O ports at b000 [size=16] Region 5: Memory at efbbc000 (32-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: sata_nv 00:05.2 IDE interface [0101]: nVidia Corporation MCP55 SATA Controller [10de:037f] (rev a3) (prog-if 85 [Master SecO PriO]) Subsystem: ASUSTeK Computer Inc. Device [1043:8239] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 (750ns min, 250ns max) Interrupt: pin C routed to IRQ 23 Region 0: I/O ports at ac00 [size=8] Region 1: I/O ports at a880 [size=4] Region 2: I/O ports at a800 [size=8] Region 3: I/O ports at a480 [size=4] Region 4: I/O ports at a400 [size=16] Region 5: Memory at efbb3000 (32-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: sata_nv 00:06.0 PCI bridge [0604]: nVidia Corporation MCP55 PCI bridge [10de:0370] (rev a2) (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=32 I/O behind bridge: 0000d000-0000dfff Memory behind bridge: efc00000-efcfffff Prefetchable memory behind bridge: e0000000-e7ffffff Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr+ DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> 00:0a.0 PCI bridge [0604]: nVidia Corporation MCP55 PCI Express bridge [10de:0376] (rev a3) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=02, subordinate=03, sec-latency=0 I/O behind bridge: 0000e000-0000efff Memory behind bridge: efd00000-efdfffff Prefetchable memory behind bridge: 00000000ee800000-00000000eeffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:0b.0 PCI bridge [0604]: nVidia Corporation MCP55 PCI Express bridge [10de:0374] (rev a3) (prog-if 00 [Normal decode]) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=04, subordinate=04, sec-latency=0 Memory behind bridge: efe00000-efefffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:0c.0 PCI bridge [0604]: nVidia Corporation MCP55 PCI Express bridge [10de:0374] (rev a3) (prog-if 00 [Normal decode]) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=05, subordinate=05, sec-latency=0 Memory behind bridge: eff00000-efffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:0d.0 PCI bridge [0604]: nVidia Corporation MCP55 PCI Express bridge [10de:0378] (rev a3) (prog-if 00 [Normal decode]) Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=06, subordinate=06, sec-latency=0 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:0e.0 PCI bridge [0604]: nVidia Corporation MCP55 PCI Express bridge [10de:0375] (rev a3) (prog-if 00 [Normal decode]) Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=07, subordinate=07, sec-latency=0 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:0f.0 PCI bridge [0604]: nVidia Corporation MCP55 PCI Express bridge [10de:0377] (rev a3) (prog-if 00 [Normal decode]) Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=08, subordinate=08, sec-latency=0 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor HyperTransport Configuration [1022:1200] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: <access denied> 00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor Address Map [1022:1201] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor DRAM Controller [1022:1202] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Kernel driver in use: amd64_edac 00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor Miscellaneous Control [1022:1203] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: <access denied> 00:18.4 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor Link Control [1022:1204] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 01:05.0 VGA compatible controller [0300]: ATI Technologies Inc ES1000 [1002:515e] (rev 02) (prog-if 00 [VGA controller]) Subsystem: ASUSTeK Computer Inc. Device [1043:81de] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 (2000ns min), Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 17 Region 0: Memory at e0000000 (32-bit, prefetchable) [size=128M] Region 1: I/O ports at d000 [size=256] Region 2: Memory at efcf0000 (32-bit, non-prefetchable) [size=64K] Expansion ROM at efcc0000 [disabled] [size=128K] Capabilities: <access denied> Kernel driver in use: radeon 02:00.0 PCI bridge [0604]: Intel Corporation 6702PXH PCI Express-to-PCI Bridge A [8086:032c] (rev 09) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=02, secondary=03, subordinate=03, sec-latency=32 I/O behind bridge: 0000e000-0000efff Memory behind bridge: efd00000-efdfffff Prefetchable memory behind bridge: 00000000ee800000-00000000eeffffff Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> 03:04.0 RAID bus controller [0104]: 3ware Inc 9xxx-series SATA-RAID [13c1:1002] Subsystem: 3ware Inc 9xxx-series SATA-RAID [13c1:1002] Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 (2250ns min), Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 10 Region 0: I/O ports at e800 [size=256] Region 1: Memory at efdffc00 (64-bit, non-prefetchable) [size=256] Region 3: Memory at ee800000 (64-bit, prefetchable) [size=8M] Expansion ROM at efde0000 [disabled] [size=64K] Capabilities: <access denied> Kernel driver in use: 3w-9xxx 04:00.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5721 Gigabit Ethernet PCI Express [14e4:1659] (rev 21) Subsystem: ASUSTeK Computer Inc. Device [1043:8149] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 19 Region 0: Memory at efef0000 (64-bit, non-prefetchable) [size=64K] Capabilities: <access denied> Kernel driver in use: tg3 05:00.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5721 Gigabit Ethernet PCI Express [14e4:1659] (rev 21) Subsystem: ASUSTeK Computer Inc. Device [1043:8149] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 46 Region 0: Memory at efff0000 (64-bit, non-prefetchable) [size=64K] Expansion ROM at <ignored> [disabled] Capabilities: <access denied> Kernel driver in use: tg3 ** USB devices: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub -- System Information: Debian Release: wheezy/sid APT prefers testing APT policy: (500, 'testing') Architecture: amd64 (x86_64) Kernel: Linux 3.1.0-1-amd64 (SMP w/4 CPU cores) Locale: LANG=hu_HU.UTF-8, LC_CTYPE=hu_HU.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages linux-image-3.1.0-1-amd64 depends on: ii debconf [debconf-2.0] 1.5.41 ii initramfs-tools [linux-initramfs-tool] 0.99 ii linux-base 3.4 ii module-init-tools 3.16-1 Versions of packages linux-image-3.1.0-1-amd64 recommends: ii firmware-linux-free 3 Versions of packages linux-image-3.1.0-1-amd64 suggests: pn grub-pc 1.99-14 pn linux-doc-3.1 <none> Versions of packages linux-image-3.1.0-1-amd64 is related to: ii firmware-bnx2 <none> ii firmware-bnx2x <none> ii firmware-ipw2x00 <none> ii firmware-ivtv <none> ii firmware-iwlwifi <none> ii firmware-linux 0.35 ii firmware-linux-nonfree 0.35 ii firmware-qlogic <none> ii firmware-ralink <none> ii xen-hypervisor-4.1-amd64 [xen-hypervisor] 4.1.2-2 -- debconf information: * linux-image-3.1.0-1-amd64/postinst/missing-firmware-3.1.0-1-amd64: linux-image-3.1.0-1-amd64/postinst/ignoring-ramdisk: linux-image-3.1.0-1-amd64/postinst/depmod-error-initrd-3.1.0-1-amd64: false linux-image-3.1.0-1-amd64/prerm/removing-running-kernel-3.1.0-1-amd64: true
--- End Message ---
--- Begin Message ---Version: 3.4.1-1~experimental.1+rm Debian 6.0 Long Term Support has now ended, and the 'linux-2.6' source package will no longer be updated. This bug is being closed on the assumption that it does not affect the kernel versions in newer Debian releases. If you can still reproduce this bug in a newer release, please reopen the bug report and reassign it to 'src:linux' and the affected version of the package. You can find the package version for the running kernel by running: uname -v or the versions of all installed kernel packages by running: dpkg -l 'linux-image-[34]*' | grep ^.i and looking at the third column. I apologise that we weren't able to provide a specific resolution for this bug. Ben. -- Ben Hutchings - Debian developer, member of Linux kernel and LTS teams
--- End Message ---
