Your message dated Sun, 07 Feb 2016 22:43:08 +0000
with message-id <E1aSY2u-0006HP-UN@deadeye>
and subject line Closing bugs assigned to linux-2.6 package
has caused the Debian Bug report #652737,
regarding linux-image-2.6.32-5-686: ethernet device eth0 (module atl1c) fails.
After module reload device is not present any more.
to be marked as done.
This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.
(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact ow...@bugs.debian.org
immediately.)
--
652737: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=652737
Debian Bug Tracking System
Contact ow...@bugs.debian.org with problems
--- Begin Message ---
Package: linux-2.6
Version: 2.6.32-39
Severity: important
Description:
When using wired connection after a short while ethernet connection hangs.
After unloading atl1c and reloading module it may work again. Mostly it ends up
with a error message ( kernel:[ 371.156342] Disabling IRQ #19 kernel:[
774.643828] do_IRQ: 1.177 No irq handler for vector (irq -1)) and there is no
more eth device present. Only reboot changes this.
-- Package-specific info:
** Version:
Linux version 2.6.32-5-686 (Debian 2.6.32-39) (da...@debian.org) (gcc version
4.3.5 (Debian 4.3.5-4) ) #1 SMP Thu Nov 3 04:23:54 UTC 2011
** Command line:
BOOT_IMAGE=/vmlinuz-2.6.32-5-686 root=/dev/mapper/vg01-root ro quiet
acpi_osi=Linux usbcore.autosuspend=1
** Not tainted
** Kernel log:
[ 48.179535] EXT3-fs warning: maximal mount count reached, running e2fsck is
recommended
[ 48.181362] EXT3 FS on dm-7, internal journal
[ 48.181378] EXT3-fs: mounted filesystem with ordered data mode.
[ 98.328981] hda-intel: IRQ timing workaround is activated for card #0.
Suggest a bigger bdl_pos_adj.
[ 134.660149] atl1c 0000:01:00.0: PCI INT A disabled
[ 158.108419] atl1c 0000:01:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 158.108456] atl1c 0000:01:00.0: setting latency timer to 64
[ 158.231819] atl1c 0000:01:00.0: version 1.0.0.2-NAPI
[ 158.403000] atl1c 0000:01:00.0: irq 29 for MSI/MSI-X
[ 158.404150] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 159.872662] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full
Duplex>
[ 159.873276] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 160.832578] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Down
[ 162.373469] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full
Duplex>
[ 170.364044] eth0: no IPv6 routers present
[ 371.156082] irq 19: nobody cared (try booting with the "irqpoll" option)
[ 371.156099] Pid: 0, comm: swapper Not tainted 2.6.32-5-686 #1
[ 371.156108] Call Trace:
[ 371.156125] [<c106d619>] ? __report_bad_irq+0x24/0x69
[ 371.156138] [<c106d620>] ? __report_bad_irq+0x2b/0x69
[ 371.156150] [<c106d745>] ? note_interrupt+0xe7/0x13e
[ 371.156163] [<c106dc73>] ? handle_fasteoi_irq+0x7a/0x97
[ 371.156177] [<c1004dd7>] ? handle_irq+0x17/0x1b
[ 371.156189] [<c1004659>] ? do_IRQ+0x38/0x89
[ 371.156201] [<c10037f0>] ? common_interrupt+0x30/0x38
[ 371.156249] [<f80bf24b>] ? acpi_idle_enter_simple+0x117/0x151 [processor]
[ 371.156264] [<c11c6d25>] ? cpuidle_idle_call+0x68/0xbb
[ 371.156276] [<c1002377>] ? cpu_idle+0x89/0xa2
[ 371.156290] [<c13bf806>] ? start_kernel+0x318/0x31d
[ 371.156297] handlers:
[ 371.156303] [<f827e931>] (usb_hcd_irq+0x0/0x71 [usbcore])
[ 371.156342] Disabling IRQ #19
[ 380.336164] atl1c 0000:01:00.0: PCI INT A disabled
[ 417.224126] wlan0: deauthenticating from 62:67:f0:71:a1:57 by local choice
(reason=3)
[ 418.949666] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 421.191423] wlan0: direct probe to AP 62:67:f0:5c:f6:db (try 1)
[ 421.195997] wlan0: direct probe responded
[ 421.196048] wlan0: authenticate with AP 62:67:f0:5c:f6:db (try 1)
[ 421.233859] wlan0: authenticated
[ 421.233939] wlan0: associate with AP 62:67:f0:5c:f6:db (try 1)
[ 421.240544] wlan0: RX AssocResp from 62:67:f0:5c:f6:db (capab=0x431 status=0
aid=1)
[ 421.240557] wlan0: associated
[ 421.250639] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 431.956041] wlan0: no IPv6 routers present
[ 774.643752] atl1c 0000:01:00.0: enabling device (0000 -> 0002)
[ 774.643779] atl1c 0000:01:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 774.643815] atl1c 0000:01:00.0: setting latency timer to 64
[ 774.643828] do_IRQ: 1.177 No irq handler for vector (irq -1)
[ 774.897175] atl1c 0000:01:00.0: PCI INT A disabled
[ 774.897216] atl1c: probe of 0000:01:00.0 failed with error -5
[ 831.963529] atl1c 0000:01:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 831.963567] atl1c 0000:01:00.0: setting latency timer to 64
[ 832.212181] atl1c 0000:01:00.0: PCI INT A disabled
[ 832.212215] atl1c: probe of 0000:01:00.0 failed with error -5
** Model information
not available
** Loaded modules:
Module Size Used by
atl1c 23864 0
sha256_generic 10748 2
cbc 2047 1
dm_crypt 9264 1
cdc_subset 1593 0
cdc_ether 2633 0
usbnet 9527 2 cdc_subset,cdc_ether
mii 2714 1 usbnet
aes_i586 6816 4
aes_generic 25738 1 aes_i586
acpi_cpufreq 4951 1
cpufreq_stats 1997 0
parport_pc 15799 0
cpufreq_conservative 4018 0
ppdev 4058 0
lp 5570 0
cpufreq_powersave 602 0
cpufreq_userspace 1480 0
parport 22554 3 parport_pc,ppdev,lp
fuse 44268 1
ipt_LOG 3570 1
ipt_REJECT 1517 2
xt_tcpudp 1743 6
xt_state 927 1
iptable_filter 1790 1
ipt_MASQUERADE 1134 3
iptable_nat 3551 1
nf_nat 10568 2 ipt_MASQUERADE,iptable_nat
nf_conntrack_ipv4 7597 4 iptable_nat,nf_nat
nf_conntrack 38075 5
xt_state,ipt_MASQUERADE,iptable_nat,nf_nat,nf_conntrack_ipv4
nf_defrag_ipv4 779 1 nf_conntrack_ipv4
ip_tables 7706 2 iptable_filter,iptable_nat
x_tables 8327 7
ipt_LOG,ipt_REJECT,xt_tcpudp,xt_state,ipt_MASQUERADE,iptable_nat,ip_tables
ext2 46245 1
loop 9769 0
arc4 974 2
ecb 1405 2
snd_hda_codec_realtek 163318 1
uvcvideo 45554 0
snd_hda_intel 16823 2
videodev 25605 1 uvcvideo
ath9k 238477 0
joydev 6739 0
v4l1_compat 10250 2 uvcvideo,videodev
usb_storage 30905 0
mac80211 123586 1 ath9k
snd_hda_codec 46002 2 snd_hda_codec_realtek,snd_hda_intel
i915 223022 2
ath 6018 1 ath9k
snd_hwdep 4054 1 snd_hda_codec
drm_kms_helper 18569 1 i915
snd_pcm 47226 2 snd_hda_intel,snd_hda_codec
cfg80211 87637 3 ath9k,mac80211,ath
snd_seq 35463 0
drm 111992 3 i915,drm_kms_helper
uhci_hcd 16057 0
eeepc_laptop 10448 0
ehci_hcd 28693 0
snd_timer 12270 2 snd_pcm,snd_seq
rfkill 10264 2 cfg80211,eeepc_laptop
psmouse 44809 0
snd_seq_device 3673 1 snd_seq
i2c_algo_bit 3497 1 i915
usbcore 98969 8
cdc_subset,cdc_ether,usbnet,uvcvideo,usb_storage,uhci_hcd,ehci_hcd
i2c_core 12787 5 videodev,i915,drm_kms_helper,drm,i2c_algo_bit
wmi 3575 0
pci_hotplug 18545 1 eeepc_laptop
nls_base 4541 1 usbcore
snd 34423 12
snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_seq,snd_timer,snd_seq_device
evdev 5609 23
video 14605 1 i915
serio_raw 2916 0
led_class 1757 1 ath9k
output 1204 1 video
battery 3782 0
ac 1640 0
processor 26327 3 acpi_cpufreq
button 3598 1 i915
soundcore 3450 1 snd
snd_page_alloc 5045 2 snd_hda_intel,snd_pcm
ext3 94396 6
jbd 32317 1 ext3
mbcache 3762 2 ext2,ext3
dm_mod 46234 25 dm_crypt
sd_mod 26005 3
crc_t10dif 1012 1 sd_mod
ahci 27410 2
thermal 9206 0
libata 115869 1 ahci
thermal_sys 9378 3 video,processor,thermal
scsi_mod 104853 3 usb_storage,sd_mod,libata
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation N10 Family DMI Bridge [8086:a010]
Subsystem: ASUSTeK Computer Inc. Device [1043:83ac]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
00:02.0 VGA compatible controller [0300]: Intel Corporation N10 Family
Integrated Graphics Controller [8086:a011] (prog-if 00 [VGA controller])
Subsystem: ASUSTeK Computer Inc. Device [1043:83ac]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 28
Region 0: Memory at f7e00000 (32-bit, non-prefetchable) [size=512K]
Region 1: I/O ports at dc00 [size=8]
Region 2: Memory at d0000000 (32-bit, prefetchable) [size=256M]
Region 3: Memory at f7d00000 (32-bit, non-prefetchable) [size=1M]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915
00:02.1 Display controller [0380]: Intel Corporation N10 Family Integrated
Graphics Controller [8086:a012]
Subsystem: ASUSTeK Computer Inc. Device [1043:83ac]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at f7e80000 (32-bit, non-prefetchable) [size=512K]
Capabilities: <access denied>
00:1b.0 Audio device [0403]: Intel Corporation N10/ICH 7 Family High Definition
Audio Controller [8086:27d8] (rev 02)
Subsystem: ASUSTeK Computer Inc. Device [1043:8437]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 22
Region 0: Memory at f7cf8000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
00:1c.0 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port
1 [8086:27d0] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: 00001000-00001fff
Memory behind bridge: 80000000-801fffff
Prefetchable memory behind bridge: 0000000080200000-00000000803fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.1 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port
2 [8086:27d2] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=02, subordinate=03, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: f8000000-fbffffff
Prefetchable memory behind bridge: 00000000f0000000-00000000f6ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.3 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port
4 [8086:27d6] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: f7f00000-f7ffffff
Prefetchable memory behind bridge: 0000000080400000-00000000805fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI
Controller #1 [8086:27c8] (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:83ad]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 4: I/O ports at d400 [size=32]
Kernel driver in use: uhci_hcd
00:1d.1 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI
Controller #2 [8086:27c9] (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:83ad]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at d480 [size=32]
Kernel driver in use: uhci_hcd
00:1d.2 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI
Controller #3 [8086:27ca] (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:83ad]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at d800 [size=32]
Kernel driver in use: uhci_hcd
00:1d.3 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI
Controller #4 [8086:27cb] (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:83ad]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 16
Region 4: I/O ports at d880 [size=32]
Kernel driver in use: uhci_hcd
00:1d.7 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB2 EHCI
Controller [8086:27cc] (rev 02) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:83ad]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at f7cf7c00 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge
[8086:2448] (rev e2) (prog-if 01 [Subtractive decode])
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=05, subordinate=05, sec-latency=32
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation NM10 Family LPC Controller
[8086:27bc] (rev 02)
Subsystem: ASUSTeK Computer Inc. Device [1043:83ad]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:1f.2 SATA controller [0106]: Intel Corporation N10/ICH7 Family SATA AHCI
Controller [8086:27c1] (rev 02) (prog-if 01 [AHCI 1.0])
Subsystem: ASUSTeK Computer Inc. Device [1043:83ad]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 27
Region 0: I/O ports at d080 [size=8]
Region 1: I/O ports at d000 [size=4]
Region 2: I/O ports at cc00 [size=8]
Region 3: I/O ports at c880 [size=4]
Region 4: I/O ports at c800 [size=32]
Region 5: Memory at f7cf7800 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:1f.3 SMBus [0c05]: Intel Corporation N10/ICH 7 Family SMBus Controller
[8086:27da] (rev 02)
Subsystem: ASUSTeK Computer Inc. Device [1043:83ad]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 11
Region 4: I/O ports at 0400 [size=32]
01:00.0 Ethernet controller [0200]: Atheros Communications AR8152 v2.0 Fast
Ethernet [1969:2062] (rev c1)
Subsystem: ASUSTeK Computer Inc. Device [1043:8468]
Physical Slot: eeepc-wifi
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 19
Region 0: Memory at f7fc0000 (64-bit, non-prefetchable) [size=256K]
Region 2: I/O ports at ec00 [size=128]
Capabilities: <access denied>
02:00.0 Network controller [0280]: Atheros Communications Inc. AR9285 Wireless
Network Adapter (PCI-Express) [168c:002b] (rev 01)
Subsystem: AzureWave Device [1a3b:1089]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at fbff0000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: ath9k
** USB devices:
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 002: ID 0525:a4a2 Netchip Technology, Inc. Linux-USB
Ethernet/RNDIS Gadget
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 003: ID 13d3:5702 IMC Networks UVC VGA Webcam
Bus 001 Device 002: ID 058f:6366 Alcor Micro Corp. Multi Flash Reader
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: 6.0.3
APT prefers stable-updates
APT policy: (500, 'stable-updates'), (500, 'stable')
Architecture: i386 (i686)
Kernel: Linux 2.6.32-5-686 (SMP w/2 CPU cores)
Locale: LANG=de_CH.UTF-8, LC_CTYPE=de_CH.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-2.6.32-5-686 depends on:
ii debconf [debconf-2.0] 1.5.36.1 Debian configuration management sy
ii initramfs-tools [linux-initra 0.98.8 tools for generating an initramfs
ii linux-base 2.6.32-39 Linux image base package
ii module-init-tools 3.12-1 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.32-5-686 recommends:
pn firmware-linux-free <none> (no description available)
ii libc6-i686 2.11.2-10 Embedded GNU C Library: Shared lib
Versions of packages linux-image-2.6.32-5-686 suggests:
pn grub | lilo <none> (no description available)
pn linux-doc-2.6.32 <none> (no description available)
Versions of packages linux-image-2.6.32-5-686 is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
pn firmware-iwlwifi <none> (no description available)
pn firmware-linux <none> (no description available)
pn firmware-linux-nonfree <none> (no description available)
pn firmware-qlogic <none> (no description available)
pn firmware-ralink <none> (no description available)
pn xen-hypervisor <none> (no description available)
-- debconf information:
linux-image-2.6.32-5-686/prerm/removing-running-kernel-2.6.32-5-686: true
linux-image-2.6.32-5-686/postinst/depmod-error-initrd-2.6.32-5-686: false
linux-image-2.6.32-5-686/postinst/ignoring-do-bootloader-2.6.32-5-686:
linux-image-2.6.32-5-686/postinst/missing-firmware-2.6.32-5-686:
--- End Message ---
--- Begin Message ---
Version: 3.4.1-1~experimental.1+rm
Debian 6.0 Long Term Support has now ended, and the 'linux-2.6' source
package will no longer be updated. This bug is being closed on the
assumption that it does not affect the kernel versions in newer Debian
releases.
If you can still reproduce this bug in a newer release, please reopen
the bug report and reassign it to 'src:linux' and the affected version
of the package. You can find the package version for the running
kernel by running:
uname -v
or the versions of all installed kernel packages by running:
dpkg -l 'linux-image-[34]*' | grep ^.i
and looking at the third column.
I apologise that we weren't able to provide a specific resolution for
this bug.
Ben.
--
Ben Hutchings - Debian developer, member of Linux kernel and LTS teams
--- End Message ---
