Your message dated Sun, 07 Feb 2016 22:43:08 +0000
with message-id <E1aSY2u-0006GY-Iy@deadeye>
and subject line Closing bugs assigned to linux-2.6 package
has caused the Debian Bug report #637085,
regarding linux-image-2.6.32-5-amd64: Hard hang following BUG: scheduling while 
atomic: swapper/0/0x10000100
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact ow...@bugs.debian.org
immediately.)


-- 
637085: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=637085
Debian Bug Tracking System
Contact ow...@bugs.debian.org with problems
--- Begin Message ---
Package: linux-2.6
Version: 2.6.32-35
Severity: important


We are experiencing hard lock ups when under heavy load. See below for the log 
entries we have managed to capture via remote syslog before the machine locks 
completely. The machine is a BL460c G7 and is performing multiple I/O stress 
tests to ext4 filesystems presented over FC via a qlogic card connected to a 
P2000 MSA G3. Please let me know if we can provide any further information that 
may be useful in debugging.

Aug  8 12:28:32 sulcus kernel: [ 2222.839061] kernel BUG at 
/build/buildd-linux-2.6_2.6.32-35-amd64-aZSlKL/linux-2.6-2.6.32/debian/build/source_amd64_none/kernel/workqueue.c:287!
Aug  8 12:28:32 sulcus kernel: [ 2222.839121] invalid opcode: 0000 [#1] SMP 
Aug  8 12:28:32 sulcus kernel: [ 2222.839154] last sysfs file: 
/sys/devices/pci0000:00/0000:00:07.0/0000:06:00.1/host1/rport-1:0-0/target1:0:0/1:0:0:2/block/sdh/stat
Aug  8 12:28:32 sulcus kernel: [ 2222.839211] CPU 0 
Aug  8 12:28:32 sulcus kernel: [ 2222.839237] Modules linked in: xfs exportfs 
ext4 jbd2 crc16 ext2 dm_round_robin dm_multipath scsi_dh loop sd_mod crc_t10dif 
snd_pcm snd_timer snd soundcore hpwdt snd_page_alloc hpilo joydev psmouse 
power_meter evdev container serio_raw button pcspkr processor ext3 jbd mbcache 
usbhid hid dm_mod hpsa qla2xxx uhci_hcd scsi_transport_fc cciss scsi_tgt 
ehci_hcd usbcore nls_base scsi_mod thermal thermal_sys be2net [last unloaded: 
scsi_wait_scan]
Aug  8 12:28:32 sulcus kernel: [ 2222.839577] Pid: 1996, comm: ext4-dio-unwrit 
Not tainted 2.6.32-5-amd64 #1 ProLiant BL460c G7
Aug  8 12:28:32 sulcus kernel: [ 2222.839627] RIP: 0010:[<ffffffff810618d6>]  
[<ffffffff810618d6>] worker_thread+0x177/0x21d
Aug  8 12:28:32 sulcus kernel: [ 2222.839687] RSP: 0018:ffff880587189e40  
EFLAGS: 00010286
Aug  8 12:28:32 sulcus kernel: [ 2222.839717] RAX: 0000000000000000 RBX: 
ffff880587189ef8 RCX: ffff880585e8db78
Aug  8 12:28:32 sulcus kernel: [ 2222.839750] RDX: ffff880585e8db78 RSI: 
ffff880587189e80 RDI: ffffe8ffffa08a00
Aug  8 12:28:32 sulcus kernel: [ 2222.839783] RBP: ffffe8ffffa08a00 R08: 
ffff880587188000 R09: ffff880015215780
Aug  8 12:28:32 sulcus kernel: [ 2222.839816] R10: 0000000001959d40 R11: 
ffff880015215f98 R12: ffff880585e8db70
Aug  8 12:28:32 sulcus kernel: [ 2222.839849] R13: ffff880585e8db78 R14: 
ffff880583ad3170 R15: ffff880583ad3170
Aug  8 12:28:32 sulcus kernel: [ 2222.839883] FS:  0000000000000000(0000) 
GS:ffff880015200000(0000) knlGS:0000000000000000
Aug  8 12:28:32 sulcus kernel: [ 2222.839933] CS:  0010 DS: 0018 ES: 0018 CR0: 
000000008005003b
Aug  8 12:28:32 sulcus kernel: [ 2222.839963] CR2: 00007fd1e46237b0 CR3: 
00000001ceca6000 CR4: 00000000000006f0
Aug  8 12:28:32 sulcus kernel: [ 2222.839997] DR0: 0000000000000000 DR1: 
0000000000000000 DR2: 0000000000000000
Aug  8 12:28:32 sulcus kernel: [ 2222.840030] DR3: 0000000000000000 DR6: 
00000000ffff0ff0 DR7: 0000000000000400
Aug  8 12:28:32 sulcus kernel: [ 2222.840063] Process ext4-dio-unwrit (pid: 
1996, threadinfo ffff880587188000, task ffff880583ad3170)
Aug  8 12:28:32 sulcus kernel: [ 2222.840114] Stack:
Aug  8 12:28:32 sulcus kernel: [ 2222.840136]  000000000000f9e0 
ffff880583ad3528 ffff880583ad3170 ffff880587189fd8
Aug  8 12:28:32 sulcus kernel: [ 2222.840180] <0> ffff880583ad3170 
ffffe8ffffa08a18 ffffe8ffffa08a08 ffffffffa0227d81
Aug  8 12:28:32 sulcus kernel: [ 2222.840244] <0> 0000000000000000 
ffff880583ad3170 ffffffff81064f1a ffff880587189e98
Aug  8 12:28:32 sulcus kernel: [ 2222.840327] Call Trace:
Aug  8 12:28:32 sulcus kernel: [ 2222.840361]  [<ffffffffa0227d81>] ? 
ext4_end_aio_dio_work+0x0/0x5a [ext4]
Aug  8 12:28:32 sulcus kernel: [ 2222.840395]  [<ffffffff81064f1a>] ? 
autoremove_wake_function+0x0/0x2e
Aug  8 12:28:32 sulcus kernel: [ 2222.840429]  [<ffffffff8106175f>] ? 
worker_thread+0x0/0x21d
Aug  8 12:28:32 sulcus kernel: [ 2222.840459]  [<ffffffff81064c4d>] ? 
kthread+0x79/0x81
Aug  8 12:28:32 sulcus kernel: [ 2222.840492]  [<ffffffff81011baa>] ? 
child_rip+0xa/0x20
Aug  8 12:28:32 sulcus kernel: [ 2222.840522]  [<ffffffff81064bd4>] ? 
kthread+0x0/0x81
Aug  8 12:28:32 sulcus kernel: [ 2222.840551]  [<ffffffff81011ba0>] ? 
child_rip+0x0/0x20
Aug  8 12:28:32 sulcus kernel: [ 2222.840580] Code: 08 48 8b 50 08 48 89 51 08 
48 89 0a 48 89 00 48 89 40 08 66 ff 45 00 fb 66 0f 1f 44 00 00 49 8b 45 f8 48 
83 e0 fc 48 39 c5 74 04 <0f> 0b eb fe f0 41 80 65 f8 fe 4c 89 e7 ff 54 24 38 48 
8b 44 24 
Aug  8 12:28:32 sulcus kernel: [ 2222.840877] RIP  [<ffffffff810618d6>] 
worker_thread+0x177/0x21d
Aug  8 12:28:32 sulcus kernel: [ 2222.840912]  RSP <ffff880587189e40>
Aug  8 12:28:32 sulcus kernel: [ 2222.841438] ---[ end trace 0794cb72e58dafb2 
]---
Aug  8 12:28:32 sulcus kernel: [ 2222.914059] BUG: scheduling while atomic: 
swapper/0/0x10000100
Aug  8 12:28:32 sulcus kernel: [ 2222.914131] Modules linked in: xfs exportfs 
ext4 jbd2 crc16 ext2 dm_round_robin dm_multipath scsi_dh loop sd_mod crc_t10dif 
snd_pcm snd_timer snd soundcore hpwdt snd_page_alloc hpilo joydev psmouse 
power_meter evdev container serio_raw button pcspkr processor ext3 jbd mbcache 
usbhid hid dm_mod hpsa qla2xxx uhci_hcd scsi_transport_fc cciss scsi_tgt 
ehci_hcd usbcore nls_base scsi_mod thermal thermal_sys be2net [last unloaded: 
scsi_wait_scan]
Aug  8 12:28:32 sulcus kernel: [ 2222.916507] CPU 0:
Aug  8 12:28:32 sulcus kernel: [ 2222.916614] Modules linked in: xfs exportfs 
ext4 jbd2 crc16 ext2 dm_round_robin dm_multipath scsi_dh loop sd_mod crc_t10dif 
snd_pcm snd_timer snd soundcore hpwdt snd_page_alloc hpilo joydev psmouse 
power_meter evdev container serio_raw button pcspkr processor ext3 jbd mbcache 
usbhid hid dm_mod hpsa qla2xxx uhci_hcd scsi_transport_fc cciss scsi_tgt 
ehci_hcd usbcore nls_base scsi_mod thermal thermal_sys be2net [last unloaded: 
scsi_wait_scan]
Aug  8 12:28:32 sulcus kernel: [ 2222.918990] Pid: 0, comm: swapper Tainted: G  
    D    2.6.32-5-amd64 #1 ProLiant BL460c G7
Aug  8 12:28:32 sulcus kernel: [ 2222.919081] RIP: 0010:[<ffffffffa016b271>]  
[<ffffffffa016b271>] acpi_idle_enter_c1+0x9d/0xb8 [processor]
Aug  8 12:28:32 sulcus kernel: [ 2222.919224] RSP: 0018:ffffffff8142dea8  
EFLAGS: 00000296
Aug  8 12:28:32 sulcus kernel: [ 2222.919295] RAX: 0000000000000000 RBX: 
ffff880585b204a0 RCX: 0000000000000386
Aug  8 12:28:32 sulcus kernel: [ 2222.919369] RDX: 0000000000000386 RSI: 
0000000000000000 RDI: 00000000000003e8
Aug  8 12:28:32 sulcus kernel: [ 2222.919442] RBP: ffffffff810114ce R08: 
000000000000055d R09: 000000000000027c
Aug  8 12:28:32 sulcus kernel: [ 2222.919516] R10: 0000000001959d40 R11: 
0000000000000002 R12: ffff8805856c1530
Aug  8 12:28:32 sulcus kernel: [ 2222.919590] R13: 0000000000015780 R14: 
ffffffff81048271 R15: 0000000000000000
Aug  8 12:28:32 sulcus kernel: [ 2222.919664] FS:  0000000000000000(0000) 
GS:ffff880015200000(0000) knlGS:0000000000000000
Aug  8 12:28:32 sulcus kernel: [ 2222.919755] CS:  0010 DS: 0018 ES: 0018 CR0: 
000000008005003b
Aug  8 12:28:32 sulcus kernel: [ 2222.919826] CR2: 00000000004378b1 CR3: 
00000001ceca6000 CR4: 00000000000006f0
Aug  8 12:28:32 sulcus kernel: [ 2222.919900] DR0: 0000000000000000 DR1: 
0000000000000000 DR2: 0000000000000000
Aug  8 12:28:32 sulcus kernel: [ 2222.919974] DR3: 0000000000000000 DR6: 
00000000ffff0ff0 DR7: 0000000000000400
Aug  8 12:28:32 sulcus kernel: [ 2222.920047] Call Trace:
Aug  8 12:28:32 sulcus kernel: [ 2222.920115]  [<ffffffffa016b24c>] ? 
acpi_idle_enter_c1+0x78/0xb8 [processor]
Aug  8 12:28:32 sulcus kernel: [ 2222.920193]  [<ffffffff81239e26>] ? 
cpuidle_idle_call+0x94/0xee
Aug  8 12:28:32 sulcus kernel: [ 2222.920267]  [<ffffffff8100feb1>] ? 
cpu_idle+0xa2/0xda
Aug  8 12:28:32 sulcus kernel: [ 2222.920341]  [<ffffffff814f3140>] ? 
early_idt_handler+0x0/0x71
Aug  8 12:28:32 sulcus kernel: [ 2222.920414]  [<ffffffff814f3cdd>] ? 
start_kernel+0x3dc/0x3e8
Aug  8 12:28:32 sulcus kernel: [ 2222.920486]  [<ffffffff814f33b7>] ? 
x86_64_start_kernel+0xf9/0x106

-- Package-specific info:
** Version:
Linux version 2.6.32-5-amd64 (Debian 2.6.32-35) (da...@debian.org) (gcc version 
4.3.5 (Debian 4.3.5-4) ) #1 SMP Tue Jun 14 09:42:28 UTC 2011

** Command line:
BOOT_IMAGE=/vmlinuz-2.6.32-5-amd64 root=/dev/mapper/sulcus-root ro quiet

** Not tainted

** Kernel log:
[ 1362.373645] scsi(1:1:2) UNDERRUN status detected 0x15-0x800. resid=0x1c 
fw_resid=0x1c cdb=0x12 os_underflow=0x0
[ 1362.373730] scsi(1:1:2) UNDERRUN status detected 0x15-0x800. resid=0x4c 
fw_resid=0x4c cdb=0xa3 os_underflow=0x0
[ 1362.374055] scsi(0:1:2) UNDERRUN status detected 0x15-0x800. resid=0x1c 
fw_resid=0x1c cdb=0x12 os_underflow=0x0
[ 1362.374139] scsi(0:1:2) UNDERRUN status detected 0x15-0x800. resid=0x4c 
fw_resid=0x4c cdb=0xa3 os_underflow=0x0
[ 1382.345646] scsi(1:0:2) UNDERRUN status detected 0x15-0x800. resid=0x1c 
fw_resid=0x1c cdb=0x12 os_underflow=0x0
[ 1382.345876] scsi(1:0:2) UNDERRUN status detected 0x15-0x800. resid=0x4c 
fw_resid=0x4c cdb=0xa3 os_underflow=0x0
[ 1382.346621] scsi(1:0:9) UNDERRUN status detected 0x15-0x800. resid=0x1c 
fw_resid=0x1c cdb=0x12 os_underflow=0x0
[ 1382.346811] scsi(1:0:9) UNDERRUN status detected 0x15-0x800. resid=0x4c 
fw_resid=0x4c cdb=0xa3 os_underflow=0x0
[ 1382.347448] scsi(1:1:0) UNDERRUN status detected 0x15-0x800. resid=0x1c 
fw_resid=0x1c cdb=0x12 os_underflow=0x0
[ 1382.347608] scsi(1:1:0) UNDERRUN status detected 0x15-0x800. resid=0x4c 
fw_resid=0x4c cdb=0xa3 os_underflow=0x0
[ 1382.348015] scsi(1:0:0) UNDERRUN status detected 0x15-0x800. resid=0x1c 
fw_resid=0x1c cdb=0x12 os_underflow=0x0
[ 1382.348100] scsi(1:0:0) UNDERRUN status detected 0x15-0x800. resid=0x4c 
fw_resid=0x4c cdb=0xa3 os_underflow=0x0
[ 1382.348486] scsi(0:1:0) UNDERRUN status detected 0x15-0x800. resid=0x1c 
fw_resid=0x1c cdb=0x12 os_underflow=0x0
[ 1382.348649] scsi(0:1:0) UNDERRUN status detected 0x15-0x800. resid=0x4c 
fw_resid=0x4c cdb=0xa3 os_underflow=0x0
[ 1382.349023] scsi(1:1:9) UNDERRUN status detected 0x15-0x800. resid=0x1c 
fw_resid=0x1c cdb=0x12 os_underflow=0x0
[ 1382.349109] scsi(1:1:9) UNDERRUN status detected 0x15-0x800. resid=0x4c 
fw_resid=0x4c cdb=0xa3 os_underflow=0x0
[ 1382.349462] scsi(0:0:9) UNDERRUN status detected 0x15-0x800. resid=0x1c 
fw_resid=0x1c cdb=0x12 os_underflow=0x0
[ 1382.349577] scsi(0:0:9) UNDERRUN status detected 0x15-0x800. resid=0x4c 
fw_resid=0x4c cdb=0xa3 os_underflow=0x0
[ 1382.349946] scsi(0:1:9) UNDERRUN status detected 0x15-0x800. resid=0x1c 
fw_resid=0x1c cdb=0x12 os_underflow=0x0
[ 1382.350032] scsi(0:1:9) UNDERRUN status detected 0x15-0x800. resid=0x4c 
fw_resid=0x4c cdb=0xa3 os_underflow=0x0
[ 1382.350355] scsi(0:0:0) UNDERRUN status detected 0x15-0x800. resid=0x1c 
fw_resid=0x1c cdb=0x12 os_underflow=0x0
[ 1382.350438] scsi(0:0:0) UNDERRUN status detected 0x15-0x800. resid=0x4c 
fw_resid=0x4c cdb=0xa3 os_underflow=0x0
[ 1382.350752] scsi(0:0:2) UNDERRUN status detected 0x15-0x800. resid=0x1c 
fw_resid=0x1c cdb=0x12 os_underflow=0x0
[ 1382.350833] scsi(0:0:2) UNDERRUN status detected 0x15-0x800. resid=0x4c 
fw_resid=0x4c cdb=0xa3 os_underflow=0x0
[ 1382.351161] scsi(1:1:2) UNDERRUN status detected 0x15-0x800. resid=0x1c 
fw_resid=0x1c cdb=0x12 os_underflow=0x0
[ 1382.351249] scsi(1:1:2) UNDERRUN status detected 0x15-0x800. resid=0x4c 
fw_resid=0x4c cdb=0xa3 os_underflow=0x0
[ 1382.351576] scsi(0:1:2) UNDERRUN status detected 0x15-0x800. resid=0x1c 
fw_resid=0x1c cdb=0x12 os_underflow=0x0
[ 1382.351662] scsi(0:1:2) UNDERRUN status detected 0x15-0x800. resid=0x4c 
fw_resid=0x4c cdb=0xa3 os_underflow=0x0
[ 1402.323212] scsi(1:0:2) UNDERRUN status detected 0x15-0x800. resid=0x1c 
fw_resid=0x1c cdb=0x12 os_underflow=0x0
[ 1402.323444] scsi(1:0:2) UNDERRUN status detected 0x15-0x800. resid=0x4c 
fw_resid=0x4c cdb=0xa3 os_underflow=0x0
[ 1402.324170] scsi(1:0:9) UNDERRUN status detected 0x15-0x800. resid=0x1c 
fw_resid=0x1c cdb=0x12 os_underflow=0x0
[ 1402.324402] scsi(1:0:9) UNDERRUN status detected 0x15-0x800. resid=0x4c 
fw_resid=0x4c cdb=0xa3 os_underflow=0x0
[ 1402.324967] scsi(1:1:0) UNDERRUN status detected 0x15-0x800. resid=0x1c 
fw_resid=0x1c cdb=0x12 os_underflow=0x0
[ 1402.325120] scsi(1:1:0) UNDERRUN status detected 0x15-0x800. resid=0x4c 
fw_resid=0x4c cdb=0xa3 os_underflow=0x0
[ 1402.325485] scsi(1:0:0) UNDERRUN status detected 0x15-0x800. resid=0x1c 
fw_resid=0x1c cdb=0x12 os_underflow=0x0
[ 1402.325568] scsi(1:0:0) UNDERRUN status detected 0x15-0x800. resid=0x4c 
fw_resid=0x4c cdb=0xa3 os_underflow=0x0
[ 1402.325929] scsi(0:1:0) UNDERRUN status detected 0x15-0x800. resid=0x1c 
fw_resid=0x1c cdb=0x12 os_underflow=0x0
[ 1402.326045] scsi(0:1:0) UNDERRUN status detected 0x15-0x800. resid=0x4c 
fw_resid=0x4c cdb=0xa3 os_underflow=0x0
[ 1402.326460] scsi(1:1:9) UNDERRUN status detected 0x15-0x800. resid=0x1c 
fw_resid=0x1c cdb=0x12 os_underflow=0x0
[ 1402.326549] scsi(1:1:9) UNDERRUN status detected 0x15-0x800. resid=0x4c 
fw_resid=0x4c cdb=0xa3 os_underflow=0x0
[ 1402.326880] scsi(0:0:9) UNDERRUN status detected 0x15-0x800. resid=0x1c 
fw_resid=0x1c cdb=0x12 os_underflow=0x0
[ 1402.326963] scsi(0:0:9) UNDERRUN status detected 0x15-0x800. resid=0x4c 
fw_resid=0x4c cdb=0xa3 os_underflow=0x0
[ 1402.327288] scsi(0:1:9) UNDERRUN status detected 0x15-0x800. resid=0x1c 
fw_resid=0x1c cdb=0x12 os_underflow=0x0
[ 1402.327372] scsi(0:1:9) UNDERRUN status detected 0x15-0x800. resid=0x4c 
fw_resid=0x4c cdb=0xa3 os_underflow=0x0
[ 1402.327690] scsi(0:0:0) UNDERRUN status detected 0x15-0x800. resid=0x1c 
fw_resid=0x1c cdb=0x12 os_underflow=0x0
[ 1402.327772] scsi(0:0:0) UNDERRUN status detected 0x15-0x800. resid=0x4c 
fw_resid=0x4c cdb=0xa3 os_underflow=0x0
[ 1402.328091] scsi(0:0:2) UNDERRUN status detected 0x15-0x800. resid=0x1c 
fw_resid=0x1c cdb=0x12 os_underflow=0x0
[ 1402.328174] scsi(0:0:2) UNDERRUN status detected 0x15-0x800. resid=0x4c 
fw_resid=0x4c cdb=0xa3 os_underflow=0x0
[ 1402.328502] scsi(1:1:2) UNDERRUN status detected 0x15-0x800. resid=0x1c 
fw_resid=0x1c cdb=0x12 os_underflow=0x0
[ 1402.328588] scsi(1:1:2) UNDERRUN status detected 0x15-0x800. resid=0x4c 
fw_resid=0x4c cdb=0xa3 os_underflow=0x0
[ 1402.328913] scsi(0:1:2) UNDERRUN status detected 0x15-0x800. resid=0x1c 
fw_resid=0x1c cdb=0x12 os_underflow=0x0
[ 1402.328999] scsi(0:1:2) UNDERRUN status detected 0x15-0x800. resid=0x4c 
fw_resid=0x4c cdb=0xa3 os_underflow=0x0
[ 1422.300554] scsi(1:0:2) UNDERRUN status detected 0x15-0x800. resid=0x1c 
fw_resid=0x1c cdb=0x12 os_underflow=0x0
[ 1422.300959] scsi(1:0:2) UNDERRUN status detected 0x15-0x800. resid=0x4c 
fw_resid=0x4c cdb=0xa3 os_underflow=0x0
[ 1422.301744] scsi(1:0:9) UNDERRUN status detected 0x15-0x800. resid=0x1c 
fw_resid=0x1c cdb=0x12 os_underflow=0x0
[ 1422.301910] scsi(1:0:9) UNDERRUN status detected 0x15-0x800. resid=0x4c 
fw_resid=0x4c cdb=0xa3 os_underflow=0x0
[ 1422.302352] scsi(1:1:0) UNDERRUN status detected 0x15-0x800. resid=0x1c 
fw_resid=0x1c cdb=0x12 os_underflow=0x0
[ 1422.302473] scsi(1:1:0) UNDERRUN status detected 0x15-0x800. resid=0x4c 
fw_resid=0x4c cdb=0xa3 os_underflow=0x0
[ 1422.302885] scsi(1:0:0) UNDERRUN status detected 0x15-0x800. resid=0x1c 
fw_resid=0x1c cdb=0x12 os_underflow=0x0
[ 1422.302993] scsi(1:0:0) UNDERRUN status detected 0x15-0x800. resid=0x4c 
fw_resid=0x4c cdb=0xa3 os_underflow=0x0
[ 1422.303411] scsi(0:1:0) UNDERRUN status detected 0x15-0x800. resid=0x1c 
fw_resid=0x1c cdb=0x12 os_underflow=0x0
[ 1422.303499] scsi(0:1:0) UNDERRUN status detected 0x15-0x800. resid=0x4c 
fw_resid=0x4c cdb=0xa3 os_underflow=0x0
[ 1422.303838] scsi(1:1:9) UNDERRUN status detected 0x15-0x800. resid=0x1c 
fw_resid=0x1c cdb=0x12 os_underflow=0x0
[ 1422.303922] scsi(1:1:9) UNDERRUN status detected 0x15-0x800. resid=0x4c 
fw_resid=0x4c cdb=0xa3 os_underflow=0x0
[ 1422.304244] scsi(0:0:9) UNDERRUN status detected 0x15-0x800. resid=0x1c 
fw_resid=0x1c cdb=0x12 os_underflow=0x0
[ 1422.304326] scsi(0:0:9) UNDERRUN status detected 0x15-0x800. resid=0x4c 
fw_resid=0x4c cdb=0xa3 os_underflow=0x0
[ 1422.304653] scsi(0:1:9) UNDERRUN status detected 0x15-0x800. resid=0x1c 
fw_resid=0x1c cdb=0x12 os_underflow=0x0
[ 1422.304738] scsi(0:1:9) UNDERRUN status detected 0x15-0x800. resid=0x4c 
fw_resid=0x4c cdb=0xa3 os_underflow=0x0
[ 1422.305055] scsi(0:0:0) UNDERRUN status detected 0x15-0x800. resid=0x1c 
fw_resid=0x1c cdb=0x12 os_underflow=0x0
[ 1422.305137] scsi(0:0:0) UNDERRUN status detected 0x15-0x800. resid=0x4c 
fw_resid=0x4c cdb=0xa3 os_underflow=0x0
[ 1422.305456] scsi(0:0:2) UNDERRUN status detected 0x15-0x800. resid=0x1c 
fw_resid=0x1c cdb=0x12 os_underflow=0x0
[ 1422.305539] scsi(0:0:2) UNDERRUN status detected 0x15-0x800. resid=0x4c 
fw_resid=0x4c cdb=0xa3 os_underflow=0x0
[ 1422.305867] scsi(1:1:2) UNDERRUN status detected 0x15-0x800. resid=0x1c 
fw_resid=0x1c cdb=0x12 os_underflow=0x0
[ 1422.305952] scsi(1:1:2) UNDERRUN status detected 0x15-0x800. resid=0x4c 
fw_resid=0x4c cdb=0xa3 os_underflow=0x0
[ 1422.306280] scsi(0:1:2) UNDERRUN status detected 0x15-0x800. resid=0x1c 
fw_resid=0x1c cdb=0x12 os_underflow=0x0
[ 1422.306374] scsi(0:1:2) UNDERRUN status detected 0x15-0x800. resid=0x4c 
fw_resid=0x4c cdb=0xa3 os_underflow=0x0
[ 1442.278074] scsi(1:0:2) UNDERRUN status detected 0x15-0x800. resid=0x1c 
fw_resid=0x1c cdb=0x12 os_underflow=0x0
[ 1442.278284] scsi(1:0:2) UNDERRUN status detected 0x15-0x800. resid=0x4c 
fw_resid=0x4c cdb=0xa3 os_underflow=0x0
[ 1442.278677] scsi(1:0:9) UNDERRUN status detected 0x15-0x800. resid=0x1c 
fw_resid=0x1c cdb=0x12 os_underflow=0x0
[ 1442.278771] scsi(1:0:9) UNDERRUN status detected 0x15-0x800. resid=0x4c 
fw_resid=0x4c cdb=0xa3 os_underflow=0x0
[ 1442.279343] scsi(1:1:0) UNDERRUN status detected 0x15-0x800. resid=0x1c 
fw_resid=0x1c cdb=0x12 os_underflow=0x0
[ 1442.279466] scsi(1:1:0) UNDERRUN status detected 0x15-0x800. resid=0x4c 
fw_resid=0x4c cdb=0xa3 os_underflow=0x0
[ 1442.279905] scsi(1:0:0) UNDERRUN status detected 0x15-0x800. resid=0x1c 
fw_resid=0x1c cdb=0x12 os_underflow=0x0
[ 1442.280025] scsi(1:0:0) UNDERRUN status detected 0x15-0x800. resid=0x4c 
fw_resid=0x4c cdb=0xa3 os_underflow=0x0
[ 1442.280408] scsi(0:1:0) UNDERRUN status detected 0x15-0x800. resid=0x1c 
fw_resid=0x1c cdb=0x12 os_underflow=0x0
[ 1442.280494] scsi(0:1:0) UNDERRUN status detected 0x15-0x800. resid=0x4c 
fw_resid=0x4c cdb=0xa3 os_underflow=0x0
[ 1442.280831] scsi(1:1:9) UNDERRUN status detected 0x15-0x800. resid=0x1c 
fw_resid=0x1c cdb=0x12 os_underflow=0x0
[ 1442.280916] scsi(1:1:9) UNDERRUN status detected 0x15-0x800. resid=0x4c 
fw_resid=0x4c cdb=0xa3 os_underflow=0x0
[ 1442.281240] scsi(0:0:9) UNDERRUN status detected 0x15-0x800. resid=0x1c 
fw_resid=0x1c cdb=0x12 os_underflow=0x0
[ 1442.281322] scsi(0:0:9) UNDERRUN status detected 0x15-0x800. resid=0x4c 
fw_resid=0x4c cdb=0xa3 os_underflow=0x0
[ 1442.281651] scsi(0:1:9) UNDERRUN status detected 0x15-0x800. resid=0x1c 
fw_resid=0x1c cdb=0x12 os_underflow=0x0
[ 1442.281734] scsi(0:1:9) UNDERRUN status detected 0x15-0x800. resid=0x4c 
fw_resid=0x4c cdb=0xa3 os_underflow=0x0
[ 1442.282053] scsi(0:0:0) UNDERRUN status detected 0x15-0x800. resid=0x1c 
fw_resid=0x1c cdb=0x12 os_underflow=0x0
[ 1442.282137] scsi(0:0:0) UNDERRUN status detected 0x15-0x800. resid=0x4c 
fw_resid=0x4c cdb=0xa3 os_underflow=0x0
[ 1442.282454] scsi(0:0:2) UNDERRUN status detected 0x15-0x800. resid=0x1c 
fw_resid=0x1c cdb=0x12 os_underflow=0x0
[ 1442.282536] scsi(0:0:2) UNDERRUN status detected 0x15-0x800. resid=0x4c 
fw_resid=0x4c cdb=0xa3 os_underflow=0x0
[ 1442.282869] scsi(1:1:2) UNDERRUN status detected 0x15-0x800. resid=0x1c 
fw_resid=0x1c cdb=0x12 os_underflow=0x0
[ 1442.282962] scsi(1:1:2) UNDERRUN status detected 0x15-0x800. resid=0x4c 
fw_resid=0x4c cdb=0xa3 os_underflow=0x0
[ 1442.283305] scsi(0:1:2) UNDERRUN status detected 0x15-0x800. resid=0x1c 
fw_resid=0x1c cdb=0x12 os_underflow=0x0
[ 1442.283391] scsi(0:1:2) UNDERRUN status detected 0x15-0x800. resid=0x4c 
fw_resid=0x4c cdb=0xa3 os_underflow=0x0

** Model information
sys_vendor: HP
product_name: ProLiant BL460c G7
product_version: 
chassis_vendor: HP
chassis_version: 
bios_vendor: HP
bios_version: I27

** Loaded modules:
Module                  Size  Used by
ext2                   52905  1 
dm_round_robin          2228  6 
dm_multipath           13088  4 dm_round_robin
scsi_dh                 4624  1 dm_multipath
loop                   11799  0 
hpilo                   6268  0 
hpwdt                   4916  0 
snd_pcm                60503  0 
snd_timer              15582  1 snd_pcm
snd                    46526  2 snd_pcm,snd_timer
soundcore               4598  1 snd
snd_page_alloc          6249  1 snd_pcm
psmouse                49937  0 
joydev                  8459  0 
evdev                   7352  2 
pcspkr                  1699  0 
serio_raw               3752  0 
container               2389  0 
power_meter             8302  0 
processor              29935  8 
button                  4650  0 
sd_mod                 29921  12 
crc_t10dif              1276  1 sd_mod
ext3                  106630  1 
jbd                    37085  1 ext3
mbcache                 5050  2 ext2,ext3
usbhid                 33292  0 
hid                    63257  1 usbhid
dm_mod                 53706  11 dm_multipath
uhci_hcd               18521  0 
hpsa                   34718  0 
qla2xxx               203077  24 
scsi_transport_fc      35355  1 qla2xxx
ehci_hcd               32081  0 
scsi_tgt                8482  1 scsi_transport_fc
cciss                  83334  3 
usbcore               122498  4 usbhid,uhci_hcd,ehci_hcd
nls_base                6377  1 usbcore
scsi_mod              126517  7 
scsi_dh,sd_mod,hpsa,qla2xxx,scsi_transport_fc,scsi_tgt,cciss
be2net                 29859  0 
thermal                11674  0 
thermal_sys            11942  2 processor,thermal

** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 5520 I/O Hub to ESI Port 
[8086:3406] (rev 13)
        Subsystem: Hewlett-Packard Company Device [103c:330b]
        Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr+ 
Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Capabilities: <access denied>

00:01.0 PCI bridge [0604]: Intel Corporation 5520/5500/X58 I/O Hub PCI Express 
Root Port 1 [8086:3408] (rev 13) (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ 
Stepping- SERR+ FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Bus: primary=00, secondary=03, subordinate=05, sec-latency=0
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- <SERR- <PERR-
        BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: <access denied>
        Kernel driver in use: pcieport

00:02.0 PCI bridge [0604]: Intel Corporation 5520/5500/X58 I/O Hub PCI Express 
Root Port 2 [8086:3409] (rev 13) (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ 
Stepping- SERR+ FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Bus: primary=00, secondary=0d, subordinate=0d, sec-latency=0
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- <SERR- <PERR-
        BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: <access denied>
        Kernel driver in use: pcieport

00:03.0 PCI bridge [0604]: Intel Corporation 5520/5500/X58 I/O Hub PCI Express 
Root Port 3 [8086:340a] (rev 13) (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ 
Stepping- SERR+ FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
        Memory behind bridge: fb600000-fb8fffff
        Prefetchable memory behind bridge: 00000000f8000000-00000000f80fffff
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort+ <SERR- <PERR-
        BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: <access denied>
        Kernel driver in use: pcieport

00:04.0 PCI bridge [0604]: Intel Corporation 5520/X58 I/O Hub PCI Express Root 
Port 4 [8086:340b] (rev 13) (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ 
Stepping- SERR+ FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Bus: primary=00, secondary=0e, subordinate=0e, sec-latency=0
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- <SERR- <PERR-
        BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: <access denied>
        Kernel driver in use: pcieport

00:05.0 PCI bridge [0604]: Intel Corporation 5520/X58 I/O Hub PCI Express Root 
Port 5 [8086:340c] (rev 13) (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ 
Stepping- SERR+ FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Bus: primary=00, secondary=0f, subordinate=0f, sec-latency=0
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- <SERR- <PERR-
        BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: <access denied>
        Kernel driver in use: pcieport

00:06.0 PCI bridge [0604]: Intel Corporation 5520/X58 I/O Hub PCI Express Root 
Port 6 [8086:340d] (rev 13) (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ 
Stepping- SERR+ FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Bus: primary=00, secondary=10, subordinate=10, sec-latency=0
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- <SERR- <PERR-
        BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: <access denied>
        Kernel driver in use: pcieport

00:07.0 PCI bridge [0604]: Intel Corporation 5520/5500/X58 I/O Hub PCI Express 
Root Port 7 [8086:340e] (rev 13) (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ 
Stepping- SERR+ FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Bus: primary=00, secondary=06, subordinate=08, sec-latency=0
        I/O behind bridge: 00003000-00003fff
        Memory behind bridge: fb900000-fbcfffff
        Prefetchable memory behind bridge: 00000000f8100000-00000000f81fffff
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- <SERR- <PERR-
        BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: <access denied>
        Kernel driver in use: pcieport

00:08.0 PCI bridge [0604]: Intel Corporation 5520/5500/X58 I/O Hub PCI Express 
Root Port 8 [8086:340f] (rev 13) (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ 
Stepping- SERR+ FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Bus: primary=00, secondary=11, subordinate=11, sec-latency=0
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- <SERR- <PERR-
        BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: <access denied>
        Kernel driver in use: pcieport

00:09.0 PCI bridge [0604]: Intel Corporation 5520/5500/X58 I/O Hub PCI Express 
Root Port 9 [8086:3410] (rev 13) (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ 
Stepping- SERR+ FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Bus: primary=00, secondary=09, subordinate=0b, sec-latency=0
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- <SERR- <PERR-
        BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: <access denied>
        Kernel driver in use: pcieport

00:0a.0 PCI bridge [0604]: Intel Corporation 5520/5500/X58 I/O Hub PCI Express 
Root Port 10 [8086:3411] (rev 13) (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ 
Stepping- SERR+ FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Bus: primary=00, secondary=12, subordinate=12, sec-latency=0
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- <SERR- <PERR-
        BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: <access denied>
        Kernel driver in use: pcieport

00:0d.0 Host bridge [0600]: Intel Corporation Device [8086:343a] (rev 13)
        Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Capabilities: <access denied>

00:0d.1 Host bridge [0600]: Intel Corporation Device [8086:343b] (rev 13)
        Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Capabilities: <access denied>

00:0d.2 Host bridge [0600]: Intel Corporation Device [8086:343c] (rev 13)
        Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Capabilities: <access denied>

00:0d.3 Host bridge [0600]: Intel Corporation Device [8086:343d] (rev 13)
        Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Capabilities: <access denied>

00:0d.4 Host bridge [0600]: Intel Corporation 5520/5500/X58 Physical Layer Port 
0 [8086:3418] (rev 13)
        Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Capabilities: <access denied>

00:0d.5 Host bridge [0600]: Intel Corporation 5520/5500 Physical Layer Port 1 
[8086:3419] (rev 13)
        Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Capabilities: <access denied>

00:0d.6 Host bridge [0600]: Intel Corporation Device [8086:341a] (rev 13)
        Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Capabilities: <access denied>

00:0e.0 Host bridge [0600]: Intel Corporation Device [8086:341c] (rev 13)
        Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Capabilities: <access denied>

00:0e.1 Host bridge [0600]: Intel Corporation Device [8086:341d] (rev 13)
        Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Capabilities: <access denied>

00:0e.2 Host bridge [0600]: Intel Corporation Device [8086:341e] (rev 13)
        Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Capabilities: <access denied>

00:0e.3 Host bridge [0600]: Intel Corporation Device [8086:341f] (rev 13)
        Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Capabilities: <access denied>

00:0e.4 Host bridge [0600]: Intel Corporation Device [8086:3439] (rev 13)
        Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Capabilities: <access denied>

00:14.0 PIC [0800]: Intel Corporation 5520/5500/X58 I/O Hub System Management 
Registers [8086:342e] (rev 13) (prog-if 00 [8259])
        Subsystem: Device [003c:000b]
        Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Capabilities: <access denied>

00:14.1 PIC [0800]: Intel Corporation 5520/5500/X58 I/O Hub GPIO and Scratch 
Pad Registers [8086:3422] (rev 13) (prog-if 00 [8259])
        Subsystem: Device [003c:000b]
        Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Capabilities: <access denied>

00:14.2 PIC [0800]: Intel Corporation 5520/5500/X58 I/O Hub Control Status and 
RAS Registers [8086:3423] (rev 13) (prog-if 00 [8259])
        Subsystem: Device [003c:000b]
        Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Capabilities: <access denied>

00:1c.0 PCI bridge [0604]: Intel Corporation 82801JI (ICH10 Family) PCI Express 
Root Port 1 [8086:3a40] (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ 
Stepping- SERR+ FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Bus: primary=00, secondary=0c, subordinate=0c, sec-latency=0
        I/O behind bridge: 00004000-00004fff
        Memory behind bridge: fbd00000-fbffffff
        Prefetchable memory behind bridge: 00000000f8200000-00000000f82fffff
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- <SERR- <PERR-
        BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: <access denied>
        Kernel driver in use: pcieport

00:1c.4 PCI bridge [0604]: Intel Corporation 82801JI (ICH10 Family) PCI Express 
Root Port 5 [8086:3a48] (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ 
Stepping- SERR+ FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
        I/O behind bridge: 00002000-00002fff
        Memory behind bridge: fa500000-fb5fffff
        Prefetchable memory behind bridge: 00000000f9000000-00000000f9ffffff
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- <SERR- <PERR-
        BridgeCtl: Parity+ SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: <access denied>
        Kernel driver in use: pcieport

00:1d.0 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB 
UHCI Controller #1 [8086:3a34] (prog-if 00 [UHCI])
        Subsystem: Hewlett-Packard Company Device [103c:330d]
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin A routed to IRQ 20
        Region 4: I/O ports at 1000 [size=32]
        Capabilities: <access denied>
        Kernel driver in use: uhci_hcd

00:1d.1 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB 
UHCI Controller #2 [8086:3a35] (prog-if 00 [UHCI])
        Subsystem: Hewlett-Packard Company Device [103c:330d]
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin B routed to IRQ 23
        Region 4: I/O ports at 1020 [size=32]
        Capabilities: <access denied>
        Kernel driver in use: uhci_hcd

00:1d.2 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB 
UHCI Controller #3 [8086:3a36] (prog-if 00 [UHCI])
        Subsystem: Hewlett-Packard Company Device [103c:330d]
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin C routed to IRQ 22
        Region 4: I/O ports at 1040 [size=32]
        Capabilities: <access denied>
        Kernel driver in use: uhci_hcd

00:1d.3 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB 
UHCI Controller #6 [8086:3a39] (prog-if 00 [UHCI])
        Subsystem: Hewlett-Packard Company Device [103c:330d]
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin D routed to IRQ 23
        Region 4: I/O ports at 1060 [size=32]
        Capabilities: <access denied>
        Kernel driver in use: uhci_hcd

00:1d.7 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB2 
EHCI Controller #1 [8086:3a3a] (prog-if 20 [EHCI])
        Subsystem: Hewlett-Packard Company Device [103c:330d]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ 
Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin A routed to IRQ 20
        Region 0: Memory at fa4f0000 (32-bit, non-prefetchable) [size=1K]
        Capabilities: <access denied>
        Kernel driver in use: ehci_hcd

00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev 
90) (prog-if 01 [Subtractive decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ 
Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Bus: primary=00, secondary=13, subordinate=13, sec-latency=32
        Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort+ <SERR- <PERR-
        BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: <access denied>

00:1f.0 ISA bridge [0601]: Intel Corporation 82801JIB (ICH10) LPC Interface 
Controller [8086:3a18]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ 
Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Capabilities: <access denied>

01:00.0 System peripheral [0880]: Hewlett-Packard Company iLO3 Slave 
instrumentation & System support [103c:3306] (rev 05)
        Subsystem: Hewlett-Packard Company Device [103c:330e]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 16
        Region 0: I/O ports at 2000 [size=256]
        Region 1: Memory at fb5f0000 (32-bit, non-prefetchable) [size=512]
        Region 2: I/O ports at 2400 [size=256]
        Capabilities: <access denied>
        Kernel driver in use: hpwdt

01:00.1 VGA compatible controller [0300]: Matrox Graphics, Inc. Device 
[102b:0533] (prog-if 00 [VGA controller])
        Subsystem: Hewlett-Packard Company Device [103c:330e]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin B routed to IRQ 7
        Region 0: Memory at f9000000 (32-bit, prefetchable) [size=16M]
        Region 1: Memory at fb5e0000 (32-bit, non-prefetchable) [size=16K]
        Region 2: Memory at fa800000 (32-bit, non-prefetchable) [size=8M]
        Expansion ROM at <unassigned> [disabled]
        Capabilities: <access denied>

01:00.2 System peripheral [0880]: Hewlett-Packard Company iLO3 Management 
Processor Support and Messaging [103c:3307] (rev 05)
        Subsystem: Hewlett-Packard Company Device [103c:330e]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin B routed to IRQ 17
        Region 0: I/O ports at 2800 [size=256]
        Region 1: Memory at fa7f0000 (32-bit, non-prefetchable) [size=256]
        Region 2: Memory at fa600000 (32-bit, non-prefetchable) [size=1M]
        Region 3: Memory at fa580000 (32-bit, non-prefetchable) [size=512K]
        Region 4: Memory at fa570000 (32-bit, non-prefetchable) [size=32K]
        Region 5: Memory at fa560000 (32-bit, non-prefetchable) [size=32K]
        [virtual] Expansion ROM at fa500000 [disabled] [size=64K]
        Capabilities: <access denied>
        Kernel driver in use: hpilo

01:00.4 USB Controller [0c03]: Hewlett-Packard Company Proliant iLO2/iLO3 
virtual USB controller [103c:3300] (rev 02) (prog-if 00 [UHCI])
        Subsystem: Hewlett-Packard Company Device [103c:330e]
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin B routed to IRQ 17
        Region 4: I/O ports at 2c00 [size=32]
        Capabilities: <access denied>
        Kernel driver in use: uhci_hcd

02:00.0 Ethernet controller [0200]: Emulex Corporation OneConnect 10Gb NIC 
(be3) [19a2:0710] (rev 01)
        Subsystem: Hewlett-Packard Company NC553i 10Gb 2-port FlexFabric 
Converged Network Adapter [103c:3315]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ 
Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 24
        Region 0: Memory at fb8f0000 (64-bit, non-prefetchable) [size=16K]
        Region 2: Memory at fb8c0000 (64-bit, non-prefetchable) [size=128K]
        Region 4: Memory at fb8a0000 (64-bit, non-prefetchable) [size=128K]
        [virtual] Expansion ROM at f8000000 [disabled] [size=256K]
        Capabilities: <access denied>
        Kernel driver in use: be2net

02:00.1 Ethernet controller [0200]: Emulex Corporation OneConnect 10Gb NIC 
(be3) [19a2:0710] (rev 01)
        Subsystem: Hewlett-Packard Company NC553i 10Gb 2-port FlexFabric 
Converged Network Adapter [103c:3315]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ 
Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin B routed to IRQ 34
        Region 0: Memory at fb890000 (64-bit, non-prefetchable) [size=16K]
        Region 2: Memory at fb860000 (64-bit, non-prefetchable) [size=128K]
        Region 4: Memory at fb840000 (64-bit, non-prefetchable) [size=128K]
        [virtual] Expansion ROM at f8040000 [disabled] [size=256K]
        Capabilities: <access denied>
        Kernel driver in use: be2net

02:00.2 Mass storage controller [0180]: Emulex Corporation OneConnect 10Gb 
iSCSI Initiator (be3) [19a2:0712] (rev 01)
        Subsystem: Hewlett-Packard Company Device [103c:3315]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin C routed to IRQ 11
        Region 0: Memory at fb830000 (64-bit, non-prefetchable) [size=16K]
        Region 2: Memory at fb800000 (64-bit, non-prefetchable) [size=128K]
        Region 4: Memory at fb7e0000 (64-bit, non-prefetchable) [size=128K]
        [virtual] Expansion ROM at f8080000 [disabled] [size=256K]
        Capabilities: <access denied>

02:00.3 Mass storage controller [0180]: Emulex Corporation OneConnect 10Gb 
iSCSI Initiator (be3) [19a2:0712] (rev 01)
        Subsystem: Hewlett-Packard Company Device [103c:3315]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin D routed to IRQ 11
        Region 0: Memory at fb7d0000 (64-bit, non-prefetchable) [size=16K]
        Region 2: Memory at fb7a0000 (64-bit, non-prefetchable) [size=128K]
        Region 4: Memory at fb780000 (64-bit, non-prefetchable) [size=128K]
        [virtual] Expansion ROM at f80c0000 [disabled] [size=256K]
        Capabilities: <access denied>

06:00.0 Fibre Channel [0c04]: QLogic Corp. ISP2532-based 8Gb Fibre Channel to 
PCI Express HBA [1077:2532] (rev 02)
        Subsystem: Hewlett-Packard Company Device [103c:3261]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ 
Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 30
        Region 0: I/O ports at 3000 [size=256]
        Region 1: Memory at fbcf0000 (64-bit, non-prefetchable) [size=16K]
        Region 3: Memory at fbb00000 (64-bit, non-prefetchable) [size=1M]
        [virtual] Expansion ROM at f8100000 [disabled] [size=256K]
        Capabilities: <access denied>
        Kernel driver in use: qla2xxx

06:00.1 Fibre Channel [0c04]: QLogic Corp. ISP2532-based 8Gb Fibre Channel to 
PCI Express HBA [1077:2532] (rev 02)
        Subsystem: Hewlett-Packard Company Device [103c:3261]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ 
Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin B routed to IRQ 37
        Region 0: I/O ports at 3400 [size=256]
        Region 1: Memory at fbaf0000 (64-bit, non-prefetchable) [size=16K]
        Region 3: Memory at fb900000 (64-bit, non-prefetchable) [size=1M]
        [virtual] Expansion ROM at f8140000 [disabled] [size=256K]
        Capabilities: <access denied>
        Kernel driver in use: qla2xxx

0c:00.0 RAID bus controller [0104]: Hewlett-Packard Company Smart Array G6 
controllers [103c:323a] (rev 01)
        Subsystem: Hewlett-Packard Company Smart Array P410i [103c:3245]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ 
Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 16
        Region 0: Memory at fbe00000 (64-bit, non-prefetchable) [size=2M]
        Region 2: Memory at fbdf0000 (64-bit, non-prefetchable) [size=4K]
        Region 4: I/O ports at 4000 [size=256]
        [virtual] Expansion ROM at f8200000 [disabled] [size=512K]
        Capabilities: <access denied>
        Kernel driver in use: cciss


** USB devices:
Bus 006 Device 002: ID 03f0:7029 Hewlett-Packard 
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub


-- System Information:
Debian Release: 6.0.2
  APT prefers stable-updates
  APT policy: (500, 'stable-updates'), (500, 'stable')
Architecture: amd64 (x86_64)

Kernel: Linux 2.6.32-5-amd64 (SMP w/8 CPU cores)
Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash

Versions of packages linux-image-2.6.32-5-amd64 depends on:
ii  debconf [debconf-2.0]       1.5.36.1     Debian configuration management sy
ii  initramfs-tools [linux-init 0.99~bpo60+1 tools for generating an initramfs
ii  linux-base                  3.3~bpo60+1  Linux image base package
ii  module-init-tools           3.12-1       tools for managing Linux kernel mo

Versions of packages linux-image-2.6.32-5-amd64 recommends:
pn  firmware-linux-free           <none>     (no description available)

Versions of packages linux-image-2.6.32-5-amd64 suggests:
pn  grub | lilo                   <none>     (no description available)
pn  linux-doc-2.6.32              <none>     (no description available)

Versions of packages linux-image-2.6.32-5-amd64 is related to:
pn  firmware-bnx2                 <none>     (no description available)
pn  firmware-bnx2x                <none>     (no description available)
pn  firmware-ipw2x00              <none>     (no description available)
pn  firmware-ivtv                 <none>     (no description available)
pn  firmware-iwlwifi              <none>     (no description available)
pn  firmware-linux                <none>     (no description available)
ii  firmware-linux-nonfree        0.28       Binary firmware for various driver
ii  firmware-qlogic               0.28       Binary firmware for QLogic IBA7220
pn  firmware-ralink               <none>     (no description available)
pn  xen-hypervisor                <none>     (no description available)

-- debconf information:
  linux-image-2.6.32-5-amd64/postinst/ignoring-do-bootloader-2.6.32-5-amd64:
  linux-image-2.6.32-5-amd64/postinst/depmod-error-initrd-2.6.32-5-amd64: false
  linux-image-2.6.32-5-amd64/prerm/removing-running-kernel-2.6.32-5-amd64: true
  linux-image-2.6.32-5-amd64/postinst/missing-firmware-2.6.32-5-amd64:



--- End Message ---
--- Begin Message ---
Version: 3.4.1-1~experimental.1+rm

Debian 6.0 Long Term Support has now ended, and the 'linux-2.6' source
package will no longer be updated.  This bug is being closed on the
assumption that it does not affect the kernel versions in newer Debian
releases.

If you can still reproduce this bug in a newer release, please reopen
the bug report and reassign it to 'src:linux' and the affected version
of the package.  You can find the package version for the running
kernel by running:

    uname -v

or the versions of all installed kernel packages by running:

    dpkg -l 'linux-image-[34]*' | grep ^.i

and looking at the third column.

I apologise that we weren't able to provide a specific resolution for
this bug.

Ben.

-- 
Ben Hutchings - Debian developer, member of Linux kernel and LTS teams

--- End Message ---

Reply via email to