I have a linux machine with 2.4.19 on it, and 2 Internet links. eth0 is Telstra Bigpond Cable (Semi static ip, its dhcp assigned), which I want to route certain ips ranges over this link. 144.135.23.0/24 for eg.
eth1 is the internal interface on 192.168.0.0/24 eth2 is an adsl connection with a static ip which I want to be the default route for any traffic left over. I can get this to sort of work, but traceroute'ing to anything I set static routes [1] with, doesn't work because I assume that it trys to come back via the default route. Is that right? Also I need to break the adsl connection into 2 parts, its a 512kbit link, so I would like to take 384kbit and 128kbit of the link, and assign 128kbit to 192.168.0.192/27 which would be done on eth1, but I don't want to limit traffic coming from eth0. (eth0 is 9mbit, so its a bit of a waste to shape it down to 128kbit now isnt it :) Is any of this possible or am I just dreaming? [1] route add -net ip.add.re.ss netmask 255.255.255.255 gw <gw ip of eth0> Thanks in advance. [NOTE: I've been to lartc.org and emailed them also, hoping to find some help, so no point telling me about them again, as I already have been and read the howto :-)] Regards, Brad Lay ([EMAIL PROTECTED]) -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
