Hello, First thing to check is what's happening when you loose connectivity: sniff the traffic on the linux 2 interfaces when you try to ping to see what's happening.
JeF On Mon, Apr 22, 2002 at 02:56:12PM +0200, [EMAIL PROTECTED] wrote: > Yep, I did so, but I'm running into problems. > Everything looks good for about 10 min. then I > loose connectivity to the loopback of my Linux box, > but the route stay's in the Cisco's route table. > After pinging from Cisco to each ethX interface of the > Linux box, the loopback is back reachable. > > my setup is like this: > > two switches connected to a Cisco 7513. > a Linux box connected to each switch. > The Linux box has an additional lo:1 interface. > > here is my setup. > > Cisco: (pretty simple) > ----------------------- > router ospf 1 > log-adjacency-changes > network 192.168.60.0 0.0.0.255 area 0 > network 192.168.99.1 0.0.0.0 area 0 > network 192.168.99.17 0.0.0.0 area 0 > network 192.168.99.251 0.0.0.0 area 0 > > zebra.conf: > ----------- > interface lo > ! > interface eth0 > ! > interface eth1 > ip address 192.168.99.5/28 > ! > interface eth2 > ip address 192.168.99.21/28 > ! > interface lo:1 > ip address 192.168.99.249/32 > ! > line vty > > > ospfd.conf: > ----------- > interface lo > ! > interface eth0 > ! > interface eth1 > ip ospf cost 10 > ! > interface eth2 > ip ospf cost 10 > ! > interface lo:1 > ! > router ospf > ospf router-id 192.168.99.249 > ospf abr-type cisco > redistribute connected > network 192.168.99.0/28 area 0 > network 192.168.99.16/28 area 0 > network 192.168.99.249/32 area 0 > ! > > > Can someone out some light on me ? > > > Thanks, > > Daniel > > > > -----Original Message----- > > From: Michael Wood [mailto:[EMAIL PROTECTED]] > > Sent: Friday, April 19, 2002 4:18 PM > > To: [EMAIL PROTECTED] > > Subject: Re: gated on woody > > > > > > On Fri, Apr 19, 2002 at 01:53:37PM +0200, > > [EMAIL PROTECTED] wrote: > > > Hiya, > > > > > > I'm trying to get gated working on an fresh installed woody. > > > It compiles with no errors but I can't even bring gated to > > > check his conf file (-C). All I get is an simple "Abort". > > > > > > I'm still on the default installation Kernel. My question now > > > is there something in the kernel that need to be turned on for > > > making gated happy. Or any other ideas ? O, it is gated 3.6 > > [snip] > > > > How about trying zebra instead? > > > > Package: zebra > > Priority: extra > > Section: net > > Installed-Size: 2546 > > Maintainer: Takuo KITAME <[EMAIL PROTECTED]> > > Architecture: i386 > > Version: 0.92a-4 > > Depends: libc6 (>= 2.2.4-4), libncurses5 (>= 5.2.20010310-1), > > libreadline4 (>= 4.2a) > > Suggests: netbase (>= 3.15-3) > > Filename: pool/main/z/zebra/zebra_0.92a-4_i386.deb > > Size: 987168 > > MD5sum: 8f122bc8f3945c1b9e2a59bf7fa97678 > > Description: A GPL'd, BGP/OSPF/RIP capable routing daemon > > GNU Zebra is free software (distributed under the GNU Generic Public > > License) which manages TCP/IP based routing protocols. It supports > > BGP 4, BGP4+, OSPFv2, OSPFv3, RIPv1, RIPv2, and RIPng as well as the > > IPv6 versions of these. > > . > > Zebra uses threading if the kernel supports it, but can also run on > > kernels that do not support threading. > > . > > Zebra is more than a routed replacement, it can be used as a Route > > Server and a Route Reflector. > > . > > Zebra is unique in design in that it has a process for each protocol. > > > > -- > > Michael Wood <[EMAIL PROTECTED]> > > > > > > -- > > To UNSUBSCRIBE, email to [EMAIL PROTECTED] > > with a subject of "unsubscribe". Trouble? Contact > > [EMAIL PROTECTED] > > > > > > > -- > To UNSUBSCRIBE, email to [EMAIL PROTECTED] > with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED] > -- -> Jean-Francois Dive --> [EMAIL PROTECTED] -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
