Hi all, i have rx2620 sitting in shelf for some time. Where can i get working iso to try? Last time i booted 3.2.0 kernel.
Gatis Frank Scheiner <frank.schei...@web.de> (šajā datumā: sestd., 2023. g. 20. maijs 21:20) rakstīja: > Dear all, > > I today noticed that a new Debian kernel is available from [1]. Thanks > to whoever built that one - most likely Adrian. > > [1]: > > http://ftp.ports.debian.org/debian-ports/pool-ia64/main/l/linux/linux-image-6.3.0-0-mckinley_6.3.2-1~exp1_ia64.deb > > I currently have the rx2620 and the rx2800-i2 at home and gave it a test > on them, and... > > ...it is working more or less flawlessly on both systems. The boot > regression at where the initramfs is extracted is gone for the rx2620. > > @Pedro: > Maybe you give this kernel a try on your rx2660 to see if it is working > for that one, too. It will take me until next week to test it on my > Montvale driven systems and the rx4640 with Madisons. > > There is a reproducible issue for the rx2800-i2, though, happening just > after the first occurance of a message from the igb driver for the four > built-in PCI-e NICs (longer log on [2]). I cut the intertwined USB > messages here: > > ``` > [ 37.566439] ------------[ cut here ]------------ > [ 37.571640] WARNING: CPU: 7 PID: 155 at kernel/irq/msi.c:196 > msi_domain_free_descs+0x240/0x280 > [ 37.582425] GSI 19 (level, low) -> CPU 7 (0x0700) vector 75 > [ 37.583481] Modules linked in: igb(+) uhci_hcd(+) ehci_pci ehci_hcd > i2c_algo_bit usbcore ptp pps_core i2c_core usb_common > [ 37.603864] CPU: 7 PID: 155 Comm: (udev-worker) Not tainted > 6.3.0-0-mckinley #1 Debian 6.3.2-1~exp1 > [ 37.622180] Hardware name: hp Integrity rx2800 i2, BIOS 01.93 09/12/2012 > [ 37.622180] > [ 37.622180] Call Trace: > [ 37.640068] [<a0000001000156d0>] show_stack.part.0+0x30/0x60 > [ 37.640068] sp=e00000084649fa70 > bsp=e000000846499c18 > [ 37.652236] [<a000000100015950>] show_stack+0x90/0xc0 > [ 37.652236] sp=e00000084649fa70 > bsp=e000000846499be0 > [ 37.696069] [<a0000001014c3750>] dump_stack_lvl+0xf0/0x160 > [ 37.696069] sp=e00000084649fc40 > bsp=e000000846499b70 > [ 37.720069] [<a0000001014c37f0>] dump_stack+0x30/0x60 > [ 37.720069] sp=e00000084649fc40 > bsp=e000000846499b18 > [ 37.720069] [<a00000010006c060>] __warn+0x160/0x200 > [ 37.720069] sp=e00000084649fc40 > bsp=e000000846499ad0 > [ 37.748236] [<a00000010006c400>] warn_slowpath_fmt+0x300/0x360 > [ 37.748236] sp=e00000084649fc40 > bsp=e000000846499a58 > [ 37.776069] [<a000000100199060>] msi_domain_free_descs+0x240/0x280 > [ 37.776069] sp=e00000084649fc70 > bsp=e000000846499a18 > [ 37.800069] [<a000000100199cd0>] > msi_domain_free_msi_descs_range+0x50/0x80 > [ 37.800069] sp=e00000084649fc80 > bsp=e0000008464999d8 > [ 37.826759] [<a000000100c26cf0>] pci_msi_teardown_msi_irqs+0x90/0xe0 > [ 37.826759] sp=e00000084649fc90 > bsp=e0000008464999b8 > [ 37.850941] [<a000000100c26010>] pci_free_msi_irqs+0x30/0xa0 > [ 37.850941] sp=e00000084649fc90 > bsp=e000000846499990 > [ 37.874941] [<a000000100c21ed0>] pci_disable_msix+0xb0/0xe0 > [ 37.874941] sp=e00000084649fc90 > bsp=e000000846499968 > [ 37.898941] [<a000000200baa130>] > igb_reset_interrupt_capability+0x230/0x260 [igb] > [ 37.898941] sp=e00000084649fc90 > bsp=e000000846499928 > [ 37.920068] [<a000000200bcb9d0>] igb_probe+0x970/0x3380 [igb] > [ 37.920068] sp=e00000084649fc90 > bsp=e000000846499858 > [ 37.950180] [<a000000100c082d0>] local_pci_probe+0x90/0x140 > [ 37.950180] sp=e00000084649fca0 > bsp=e000000846499818 > [ 37.974181] [<a000000100c09d50>] pci_device_probe+0x190/0x520 > [ 37.974181] sp=e00000084649fca0 > bsp=e0000008464997c0 > [ 37.998180] [<a000000100e61100>] really_probe+0x260/0xb20 > [ 37.998180] sp=e00000084649fcc0 > bsp=e000000846499770 > [ 38.024068] [<a000000100e61c50>] __driver_probe_device+0x290/0x420 > [ 38.024068] sp=e00000084649fcc0 > bsp=e000000846499730 > [ 38.024068] [<a000000100e61e30>] driver_probe_device+0x50/0x160 > [ 38.024068] sp=e00000084649fcc0 > bsp=e0000008464996e8 > [ 38.052236] [<a000000100e626c0>] __driver_attach+0x380/0x4c0 > [ 38.052236] sp=e00000084649fcc0 > bsp=e0000008464996b0 > [ 38.052236] [<a000000100e5bc40>] bus_for_each_dev+0x100/0x1c0 > [ 38.052236] sp=e00000084649fcc0 > bsp=e000000846499668 > [ 38.086181] [<a000000100e5fd40>] driver_attach+0x40/0x60 > [ 38.086181] sp=e00000084649fcd0 > bsp=e000000846499648 > [ 38.110180] [<a000000100e5ea90>] bus_add_driver+0x230/0x520 > [ 38.110180] sp=e00000084649fcd0 > bsp=e000000846499600 > [ 38.134180] [<a000000100e64680>] driver_register+0x100/0x360 > [ 38.134180] sp=e00000084649fcd0 > bsp=e0000008464995c8 > [ 38.142437] [<a000000100c07720>] __pci_register_driver+0xc0/0xe0 > [ 38.142437] sp=e00000084649fcd0 > bsp=e000000846499598 > [ 38.166941] [<a0000002002480c0>] igb_init_module+0xc0/0x120 [igb] > [ 38.166941] sp=e00000084649fcd0 > bsp=e000000846499578 > [ 38.184236] [<a00000010000a940>] do_one_initcall+0xe0/0x560 > [ 38.184236] sp=e00000084649fcd0 > bsp=e000000846499548 > [ 38.184236] [<a0000001001d2280>] do_init_module+0xa0/0x440 > [ 38.184236] sp=e00000084649fd10 > bsp=e000000846499510 > [ 38.214439] [<a0000001001d7820>] load_module+0x4f20/0x5620 > [ 38.214439] sp=e00000084649fd10 > bsp=e000000846499378 > [ 38.254437] [<a0000001001d84a0>] __do_sys_finit_module+0x180/0x220 > [ 38.254437] sp=e00000084649fd90 > bsp=e000000846499340 > [ 38.264236] [<a0000001001d85d0>] sys_finit_module+0x30/0x60 > [ 38.264236] sp=e00000084649fe30 > bsp=e0000008464992e8 > [ 38.264236] [<a00000010000c9e0>] ia64_ret_from_syscall+0x0/0x20 > [ 38.264236] sp=e00000084649fe30 > bsp=e0000008464992e0 > [ 38.303510] ---[ end trace 0000000000000000 ]--- > ``` > > [2]: https://pastebin.com/jrUvjRcN > > **** > > Earlier today I built a 6.4.0-rc2 kernel with kernel config based on > "config-6.1.0-9-mckinley" and localmodconfig matching the needed modules > for my rx2620 **and** rx2800-i2 combined. > > Unfortunately the resulting kernel "crashes" as soon as udevd starts and > that for both systems similarly. But yeah, the initramfs issues are gone > for the rx2620. If someone is interested, the error messages are on [3] > and [4] for rx2620 and rx2800-i2 respectively. > > [3]: https://pastebin.com/SAUKbG7Z > > [4]: https://pastebin.com/v1TTB2x3 > > Well, rc2 might just be to early to conclude that there is a new error. > And it could also be an issue of my kernel config. I'll try to observe > how later kernels behave. > > Cheers, > Frank > >
