Hello Frank! On Sat, 2023-05-20 at 20:19 +0200, Frank Scheiner wrote: > I today noticed that a new Debian kernel is available from [1]. Thanks > to whoever built that one - most likely Adrian.
The buildd built the kernel, not me ;-). > I currently have the rx2620 and the rx2800-i2 at home and gave it a test > on them, and... > > ...it is working more or less flawlessly on both systems. The boot > regression at where the initramfs is extracted is gone for the rx2620. And I can confirm that this kernel boots fine on my RX2660 again. The latest stable kernel from the 6.1 tree (6.1.27) is still affected by this bug though, so hopefully whatever fixed this bug will get backported to the 6.1 tree. > @Pedro: > Maybe you give this kernel a try on your rx2660 to see if it is working > for that one, too. It will take me until next week to test it on my > Montvale driven systems and the rx4640 with Madisons. > > There is a reproducible issue for the rx2800-i2, though, happening just > after the first occurance of a message from the igb driver for the four > built-in PCI-e NICs (longer log on [2]). I cut the intertwined USB > messages here: > > ``` > [ 37.566439] ------------[ cut here ]------------ > [ 37.571640] WARNING: CPU: 7 PID: 155 at kernel/irq/msi.c:196 > msi_domain_free_descs+0x240/0x280 > [ 37.582425] GSI 19 (level, low) -> CPU 7 (0x0700) vector 75 > [ 37.583481] Modules linked in: igb(+) uhci_hcd(+) ehci_pci ehci_hcd > i2c_algo_bit usbcore ptp pps_core i2c_core usb_common > [ 37.603864] CPU: 7 PID: 155 Comm: (udev-worker) Not tainted > 6.3.0-0-mckinley #1 Debian 6.3.2-1~exp1 > [ 37.622180] Hardware name: hp Integrity rx2800 i2, BIOS 01.93 09/12/2012 > [ 37.622180] > [ 37.622180] Call Trace: > [ 37.640068] [<a0000001000156d0>] show_stack.part.0+0x30/0x60 > [ 37.640068] sp=e00000084649fa70 > bsp=e000000846499c18 > [ 37.652236] [<a000000100015950>] show_stack+0x90/0xc0 > [ 37.652236] sp=e00000084649fa70 > bsp=e000000846499be0 > [ 37.696069] [<a0000001014c3750>] dump_stack_lvl+0xf0/0x160 > [ 37.696069] sp=e00000084649fc40 > bsp=e000000846499b70 > [ 37.720069] [<a0000001014c37f0>] dump_stack+0x30/0x60 > [ 37.720069] sp=e00000084649fc40 > bsp=e000000846499b18 > [ 37.720069] [<a00000010006c060>] __warn+0x160/0x200 > [ 37.720069] sp=e00000084649fc40 > bsp=e000000846499ad0 > [ 37.748236] [<a00000010006c400>] warn_slowpath_fmt+0x300/0x360 > [ 37.748236] sp=e00000084649fc40 > bsp=e000000846499a58 > [ 37.776069] [<a000000100199060>] msi_domain_free_descs+0x240/0x280 > [ 37.776069] sp=e00000084649fc70 > bsp=e000000846499a18 > [ 37.800069] [<a000000100199cd0>] > msi_domain_free_msi_descs_range+0x50/0x80 > [ 37.800069] sp=e00000084649fc80 > bsp=e0000008464999d8 > [ 37.826759] [<a000000100c26cf0>] pci_msi_teardown_msi_irqs+0x90/0xe0 > [ 37.826759] sp=e00000084649fc90 > bsp=e0000008464999b8 > [ 37.850941] [<a000000100c26010>] pci_free_msi_irqs+0x30/0xa0 > [ 37.850941] sp=e00000084649fc90 > bsp=e000000846499990 > [ 37.874941] [<a000000100c21ed0>] pci_disable_msix+0xb0/0xe0 > [ 37.874941] sp=e00000084649fc90 > bsp=e000000846499968 > [ 37.898941] [<a000000200baa130>] > igb_reset_interrupt_capability+0x230/0x260 [igb] > [ 37.898941] sp=e00000084649fc90 > bsp=e000000846499928 > [ 37.920068] [<a000000200bcb9d0>] igb_probe+0x970/0x3380 [igb] > [ 37.920068] sp=e00000084649fc90 > bsp=e000000846499858 > [ 37.950180] [<a000000100c082d0>] local_pci_probe+0x90/0x140 > [ 37.950180] sp=e00000084649fca0 > bsp=e000000846499818 > [ 37.974181] [<a000000100c09d50>] pci_device_probe+0x190/0x520 > [ 37.974181] sp=e00000084649fca0 > bsp=e0000008464997c0 > [ 37.998180] [<a000000100e61100>] really_probe+0x260/0xb20 > [ 37.998180] sp=e00000084649fcc0 > bsp=e000000846499770 > [ 38.024068] [<a000000100e61c50>] __driver_probe_device+0x290/0x420 > [ 38.024068] sp=e00000084649fcc0 > bsp=e000000846499730 > [ 38.024068] [<a000000100e61e30>] driver_probe_device+0x50/0x160 > [ 38.024068] sp=e00000084649fcc0 > bsp=e0000008464996e8 > [ 38.052236] [<a000000100e626c0>] __driver_attach+0x380/0x4c0 > [ 38.052236] sp=e00000084649fcc0 > bsp=e0000008464996b0 > [ 38.052236] [<a000000100e5bc40>] bus_for_each_dev+0x100/0x1c0 > [ 38.052236] sp=e00000084649fcc0 > bsp=e000000846499668 > [ 38.086181] [<a000000100e5fd40>] driver_attach+0x40/0x60 > [ 38.086181] sp=e00000084649fcd0 > bsp=e000000846499648 > [ 38.110180] [<a000000100e5ea90>] bus_add_driver+0x230/0x520 > [ 38.110180] sp=e00000084649fcd0 > bsp=e000000846499600 > [ 38.134180] [<a000000100e64680>] driver_register+0x100/0x360 > [ 38.134180] sp=e00000084649fcd0 > bsp=e0000008464995c8 > [ 38.142437] [<a000000100c07720>] __pci_register_driver+0xc0/0xe0 > [ 38.142437] sp=e00000084649fcd0 > bsp=e000000846499598 > [ 38.166941] [<a0000002002480c0>] igb_init_module+0xc0/0x120 [igb] > [ 38.166941] sp=e00000084649fcd0 > bsp=e000000846499578 > [ 38.184236] [<a00000010000a940>] do_one_initcall+0xe0/0x560 > [ 38.184236] sp=e00000084649fcd0 > bsp=e000000846499548 > [ 38.184236] [<a0000001001d2280>] do_init_module+0xa0/0x440 > [ 38.184236] sp=e00000084649fd10 > bsp=e000000846499510 > [ 38.214439] [<a0000001001d7820>] load_module+0x4f20/0x5620 > [ 38.214439] sp=e00000084649fd10 > bsp=e000000846499378 > [ 38.254437] [<a0000001001d84a0>] __do_sys_finit_module+0x180/0x220 > [ 38.254437] sp=e00000084649fd90 > bsp=e000000846499340 > [ 38.264236] [<a0000001001d85d0>] sys_finit_module+0x30/0x60 > [ 38.264236] sp=e00000084649fe30 > bsp=e0000008464992e8 > [ 38.264236] [<a00000010000c9e0>] ia64_ret_from_syscall+0x0/0x20 > [ 38.264236] sp=e00000084649fe30 > bsp=e0000008464992e0 > [ 38.303510] ---[ end trace 0000000000000000 ]--- > ``` I got this message after rebooting the system with 6.3. > Earlier today I built a 6.4.0-rc2 kernel with kernel config based on > "config-6.1.0-9-mckinley" and localmodconfig matching the needed modules > for my rx2620 **and** rx2800-i2 combined. > > Unfortunately the resulting kernel "crashes" as soon as udevd starts and > that for both systems similarly. But yeah, the initramfs issues are gone > for the rx2620. If someone is interested, the error messages are on [3] > and [4] for rx2620 and rx2800-i2 respectively. > > [3]: https://pastebin.com/SAUKbG7Z > > [4]: https://pastebin.com/v1TTB2x3 > > Well, rc2 might just be to early to conclude that there is a new error. > And it could also be an issue of my kernel config. I'll try to observe > how later kernels behave. Maybe you will have time to bisect it tomorrow? :-) Adrian -- .''`. John Paul Adrian Glaubitz : :' : Debian Developer `. `' Physicist `- GPG: 62FF 8A75 84E0 2956 9546 0006 7426 3B37 F5B5 F913
