Hi again, I tried the t5530 with these settings in /opt/ltsp/i386/etc/lts.conf [00:xx:xx:xx:xx:xx] XSERVER = vesa X_MODE_0 = 1280x1024 X_HORZSYNC = "60-70" X_VERTREFRESH = "59-62"
and with that it works(!) but graphic is not very pleasing.. It has a via s3 graphic processor (see http://h18000.www1.hp.com/products/quickspecs/12659_div/12659_div.HTML) and a VIA Eden 800mhz proc with 128mb memory. With that gpu, what settings would you recomend in lts.conf? I.E. what XSERVER is the one to use? Im surprised it cant work out of the box. This gpu is not very uncommon. Maybe it is possible to set it right some other way? Regards /George --- Den fre 2012-03-16 skrev Petter Reinholdtsen <[email protected]>: Från: Petter Reinholdtsen <[email protected]> Ämne: Re: Login problems squeeze Till: "George" <[email protected]>, [email protected] Datum: fredag 16 mars 2012 11:44 [George] > Hi, > > I checked syslog. I have now checked the others you mentioned also.No > it was not on the same machine. It is a HP t5630 thinclient that I > netboot. It worked nicely with debian-edu 5 yesterday ;) but of course > something might have changed in version 6. I am not quite sure I understand your setup. Let me know if I got it right or wrong. You have at least three computers, one installed as a main server + thin client server (unknown hardware), one used as a diskless workstation (HP t5630) and one used as thin client (unknown hardware). Both the thin client and the diskles workstation machines work fine when booted as thin clients, but the diskless workstation crash when the first user try to log in after boot. I have not seen such problem myself, and have no experience nor recommondation. :( Could the machine run out of memory? Is there any information in /var/log/syslog on the main server about the client when the client crash? -- Happy hacking Petter Reinholdtsen -- To UNSUBSCRIBE, email to [email protected] with a subject of "unsubscribe". Trouble? Contact [email protected] Archive: http://lists.debian.org/[email protected]
