Dear maintainer of libgcr410, On Tuesday, April 27, 2010 I sent you a notice announcing my intent to upload a NMU of your package to fix its pending l10n issues, after an initial notice sent on Thursday, April 22, 2010.
You either agreed for this NMU or did not respond to my notices. I will now upload this NMU to DELAYED/7-DAY. The NMU patch is attached to this mail. The NMU changelog is: Source: libgcr410 Version: 2.4.0-9.1 Distribution: unstable Urgency: low Maintainer: Christian Perrier <[email protected]> Date: Tue, 04 May 2010 07:39:15 +0200 Closes: 460703 510334 Changes: libgcr410 (2.4.0-9.1) unstable; urgency=low . * Non-maintainer upload. * Drom DH_COMPAT from debian/rules and, while at it bump debhelper compatibility level to 7 Closes: #460703 * As a consequence, replace obsoleted "dh_clean -k" calls by "dh_prep" * Add ${misc:Depends} to package dependencies to properly handle dependencies triggerred by the use of debhelper * Explicitly point to GPL-2 document in debian/copyright * Unmark Choices for translation in debconf templates (they're non translatable) * Explicitly use 1.0 as source format * No longer hardcode command path in calls to update-reader.conf in postrm and postinst scripts * No longer ignore make errors in debian/rules * Fix pending l10n issues. Debconf translations: - Spanish (Francisco Javier Cuadrado). Closes: #510334 --
diff -Nru libgcr410-2.4.0.old/debian/changelog libgcr410-2.4.0/debian/changelog
--- libgcr410-2.4.0.old/debian/changelog 2010-04-22 06:20:36.000000000 +0200
+++ libgcr410-2.4.0/debian/changelog 2010-05-04 10:44:34.000000000 +0200
@@ -1,3 +1,24 @@
+libgcr410 (2.4.0-9.1) unstable; urgency=low
+
+ * Non-maintainer upload.
+ * Drom DH_COMPAT from debian/rules and, while at it
+ bump debhelper compatibility level to 7
+ Closes: #460703
+ * As a consequence, replace obsoleted "dh_clean -k" calls by "dh_prep"
+ * Add ${misc:Depends} to package dependencies to properly handle
+ dependencies triggerred by the use of debhelper
+ * Explicitly point to GPL-2 document in debian/copyright
+ * Unmark Choices for translation in debconf templates (they're
+ non translatable)
+ * Explicitly use 1.0 as source format
+ * No longer hardcode command path in calls to update-reader.conf in
+ postrm and postinst scripts
+ * No longer ignore make errors in debian/rules
+ * Fix pending l10n issues. Debconf translations:
+ - Spanish (Francisco Javier Cuadrado). Closes: #510334
+
+ -- Christian Perrier <[email protected]> Tue, 04 May 2010 07:39:15 +0200
+
libgcr410 (2.4.0-9) unstable; urgency=low
* Mushrooms rule the world ! (Closes: #420046)
diff -Nru libgcr410-2.4.0.old/debian/compat libgcr410-2.4.0/debian/compat
--- libgcr410-2.4.0.old/debian/compat 1970-01-01 01:00:00.000000000 +0100
+++ libgcr410-2.4.0/debian/compat 2010-04-22 18:59:13.000000000 +0200
@@ -0,0 +1 @@
+7
diff -Nru libgcr410-2.4.0.old/debian/control libgcr410-2.4.0/debian/control
--- libgcr410-2.4.0.old/debian/control 2010-04-22 06:20:36.000000000 +0200
+++ libgcr410-2.4.0/debian/control 2010-04-22 19:01:04.000000000 +0200
@@ -2,12 +2,12 @@
Section: misc
Priority: optional
Maintainer: Peter De Schrijver (p2) <[email protected]>
-Build-Depends: debhelper (>= 4.1.16), libpcsclite-dev (>> 1.4.0), po-debconf
+Build-Depends: debhelper (>= 7), libpcsclite-dev (>> 1.4.0), po-debconf
Standards-Version: 3.6.1
Package: libgcr410
Architecture: any
-Depends: ${shlibs:Depends}, debconf (>= 1.2.0) | debconf-2.0, pcscd (>> 1.2.0)
+Depends: ${shlibs:Depends}, ${misc:Depends}, pcscd (>> 1.2.0)
Provides: pcsc-ifd-handler
Description: PC/SC driver for GemPlus GCR410 serial SmartCard interface
The libgcr410 package contains a PC/SC driver for the GemPlus GCR410 serial
diff -Nru libgcr410-2.4.0.old/debian/copyright libgcr410-2.4.0/debian/copyright
--- libgcr410-2.4.0.old/debian/copyright 2010-04-22 06:20:36.000000000 +0200
+++ libgcr410-2.4.0/debian/copyright 2010-04-22 19:01:22.000000000 +0200
@@ -13,5 +13,5 @@
libgcr410 is distributed under the terms of the GNU General Public License.
On Debian GNU/Linux systems, the complete text of the GNU General
-Public License can be found in `/usr/share/common-licenses/GPL'.
+Public License can be found in `/usr/share/common-licenses/GPL-2'.
diff -Nru libgcr410-2.4.0.old/debian/libgcr410.postinst libgcr410-2.4.0/debian/libgcr410.postinst
--- libgcr410-2.4.0.old/debian/libgcr410.postinst 2010-04-22 06:20:36.000000000 +0200
+++ libgcr410-2.4.0/debian/libgcr410.postinst 2010-05-04 10:42:39.000000000 +0200
@@ -50,7 +50,7 @@
# regenerate /etc/reader.conf if update-reader.conf is available
if [ -x /usr/sbin/update-reader.conf ] ; then
- /usr/sbin/update-reader.conf || true
+ update-reader.conf || true
fi
if [ -e /dev/.devfsd ] ; then
diff -Nru libgcr410-2.4.0.old/debian/libgcr410.postrm libgcr410-2.4.0/debian/libgcr410.postrm
--- libgcr410-2.4.0.old/debian/libgcr410.postrm 2010-04-22 06:20:36.000000000 +0200
+++ libgcr410-2.4.0/debian/libgcr410.postrm 2010-05-04 10:42:54.000000000 +0200
@@ -18,7 +18,7 @@
rm -f $cfg
if [ -x /usr/sbin/update-reader.conf ] ; then
- /usr/sbin/update-reader.conf || true
+ update-reader.conf || true
fi
if [ -x /etc/init.d/pcscd ] ; then
diff -Nru libgcr410-2.4.0.old/debian/libgcr410.templates libgcr410-2.4.0/debian/libgcr410.templates
--- libgcr410-2.4.0.old/debian/libgcr410.templates 2010-04-22 06:20:36.000000000 +0200
+++ libgcr410-2.4.0/debian/libgcr410.templates 2010-04-22 19:02:34.000000000 +0200
@@ -1,6 +1,6 @@
Template: libgcr410/port
Type: select
-_Choices: ttyS0, ttyS1, ttyS2, ttyS3
+Choices: ttyS0, ttyS1, ttyS2, ttyS3
_Description: Serial port to which the smartcard reader is connected:
The driver needs to know to which serial port the GemPlus GCR410 reader is
connected.
diff -Nru libgcr410-2.4.0.old/debian/po/cs.po libgcr410-2.4.0/debian/po/cs.po
--- libgcr410-2.4.0.old/debian/po/cs.po 2010-04-22 06:20:36.000000000 +0200
+++ libgcr410-2.4.0/debian/po/cs.po 2010-04-27 07:38:12.000000000 +0200
@@ -14,8 +14,8 @@
msgid ""
msgstr ""
"Project-Id-Version: libgcr410\n"
-"Report-Msgid-Bugs-To: [email protected]\n"
-"POT-Creation-Date: 2007-03-14 23:51+0100\n"
+"Report-Msgid-Bugs-To: [email protected]\n"
+"POT-Creation-Date: 2010-04-27 07:38+0200\n"
"PO-Revision-Date: 2005-07-04 16:45+0200\n"
"Last-Translator: Miroslav Kure <[email protected]>\n"
"Language-Team: Czech <[email protected]>\n"
@@ -24,23 +24,20 @@
"Content-Transfer-Encoding: 8bit\n"
#. Type: select
-#. Choices
-#: ../libgcr410.templates:1001
-msgid "ttyS0, ttyS1, ttyS2, ttyS3"
-msgstr "ttyS0, ttyS1, ttyS2, ttyS3"
-
-#. Type: select
#. Description
-#: ../libgcr410.templates:1002
+#: ../libgcr410.templates:1001
msgid "Serial port to which the smartcard reader is connected:"
msgstr "Sériový port, ke kterému je připojena čtečka smart karet:"
#. Type: select
#. Description
-#: ../libgcr410.templates:1002
+#: ../libgcr410.templates:1001
msgid ""
"The driver needs to know to which serial port the GemPlus GCR410 reader is "
"connected."
msgstr ""
"Ovladač potřebuje vědět, ke kterému sériovému portu je připojena čtečka "
"GemPlus GCR410."
+
+#~ msgid "ttyS0, ttyS1, ttyS2, ttyS3"
+#~ msgstr "ttyS0, ttyS1, ttyS2, ttyS3"
diff -Nru libgcr410-2.4.0.old/debian/po/de.po libgcr410-2.4.0/debian/po/de.po
--- libgcr410-2.4.0.old/debian/po/de.po 2010-04-22 06:20:36.000000000 +0200
+++ libgcr410-2.4.0/debian/po/de.po 2010-04-27 07:38:12.000000000 +0200
@@ -16,8 +16,8 @@
msgid ""
msgstr ""
"Project-Id-Version: libgcr410 2.4.0-4.2\n"
-"Report-Msgid-Bugs-To: [email protected]\n"
-"POT-Creation-Date: 2007-03-14 23:51+0100\n"
+"Report-Msgid-Bugs-To: [email protected]\n"
+"POT-Creation-Date: 2010-04-27 07:38+0200\n"
"PO-Revision-Date: 2006-12-01 14:17+0100\n"
"Last-Translator: Holger Wansing <[email protected]>\n"
"Language-Team: German <[email protected]>\n"
@@ -26,23 +26,20 @@
"Content-Transfer-Encoding: 8bit\n"
#. Type: select
-#. Choices
-#: ../libgcr410.templates:1001
-msgid "ttyS0, ttyS1, ttyS2, ttyS3"
-msgstr "ttyS0, ttyS1, ttyS2, ttyS3"
-
-#. Type: select
#. Description
-#: ../libgcr410.templates:1002
+#: ../libgcr410.templates:1001
msgid "Serial port to which the smartcard reader is connected:"
msgstr "Serieller Port, an den der Smartcard-Leser angeschlossen ist:"
#. Type: select
#. Description
-#: ../libgcr410.templates:1002
+#: ../libgcr410.templates:1001
msgid ""
"The driver needs to know to which serial port the GemPlus GCR410 reader is "
"connected."
msgstr ""
"Der Treiber muss wissen, mit welchem seriellen Anschluss der GemPlus GCR410-"
"Kartenleser verbunden ist."
+
+#~ msgid "ttyS0, ttyS1, ttyS2, ttyS3"
+#~ msgstr "ttyS0, ttyS1, ttyS2, ttyS3"
diff -Nru libgcr410-2.4.0.old/debian/po/es.po libgcr410-2.4.0/debian/po/es.po
--- libgcr410-2.4.0.old/debian/po/es.po 1970-01-01 01:00:00.000000000 +0100
+++ libgcr410-2.4.0/debian/po/es.po 2010-04-27 07:38:12.000000000 +0200
@@ -0,0 +1,59 @@
+# libphidgets po-debconf translation to Spanish
+# Copyright (C) 2005, 2008 Software in the Public Interest
+# This file is distributed under the same license as the libphidgets package.
+#
+# Changes:
+# - Initial translation
+# César Gómez Martín <[email protected]>, 2005
+#
+# - Updates
+# Francisco Javier Cuadrado <[email protected]>, 2008
+#
+# Traductores, si no conocen el formato PO, merece la pena leer la
+# documentación de gettext, especialmente las secciones dedicadas a este
+# formato, por ejemplo ejecutando:
+# info -n '(gettext)PO Files'
+# info -n '(gettext)Header Entry'
+#
+# Equipo de traducción al español, por favor, lean antes de traducir
+# los siguientes documentos:
+#
+# - El proyecto de traducción de Debian al español
+# http://www.debian.org/intl/spanish/
+# especialmente las notas de traducción en
+# http://www.debian.org/intl/spanish/notas
+#
+# - La guía de traducción de po's de debconf:
+# /usr/share/doc/po-debconf/README-trans
+# o http://www.debian.org/intl/l10n/po-debconf/README-trans
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: libgcr410 2.4.0-9\n"
+"Report-Msgid-Bugs-To: [email protected]\n"
+"POT-Creation-Date: 2010-04-27 07:38+0200\n"
+"PO-Revision-Date: 2008-12-28 16:56+0100\n"
+"Last-Translator: Francisco Javier Cuadrado <[email protected]>\n"
+"Language-Team: Debian l10n Spanish <[email protected]>\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Type: select
+#. Description
+#: ../libgcr410.templates:1001
+msgid "Serial port to which the smartcard reader is connected:"
+msgstr "Puerto serie al que está conectado el lector de tarjetas inteligentes:"
+
+#. Type: select
+#. Description
+#: ../libgcr410.templates:1001
+msgid ""
+"The driver needs to know to which serial port the GemPlus GCR410 reader is "
+"connected."
+msgstr ""
+"El controlador necesita saber en qué puerto serie está conectado el lector "
+"GemPlus GCR410."
+
+#~ msgid "ttyS0, ttyS1, ttyS2, ttyS3"
+#~ msgstr "ttyS0, ttyS1, ttyS2, ttyS3"
diff -Nru libgcr410-2.4.0.old/debian/po/fr.po libgcr410-2.4.0/debian/po/fr.po
--- libgcr410-2.4.0.old/debian/po/fr.po 2010-04-22 06:20:36.000000000 +0200
+++ libgcr410-2.4.0/debian/po/fr.po 2010-04-27 07:38:12.000000000 +0200
@@ -14,8 +14,8 @@
msgid ""
msgstr ""
"Project-Id-Version: libgcr410\n"
-"Report-Msgid-Bugs-To: [email protected]\n"
-"POT-Creation-Date: 2007-03-14 23:51+0100\n"
+"Report-Msgid-Bugs-To: [email protected]\n"
+"POT-Creation-Date: 2010-04-27 07:38+0200\n"
"PO-Revision-Date: 2004-04-06 21:42+0200\n"
"Last-Translator: Eric Madesclair <[email protected]>\n"
"Language-Team: French <[email protected]>\n"
@@ -24,23 +24,20 @@
"Content-Transfer-Encoding: 8bit\n"
#. Type: select
-#. Choices
-#: ../libgcr410.templates:1001
-msgid "ttyS0, ttyS1, ttyS2, ttyS3"
-msgstr "ttyS0, ttyS1, ttyS2, ttyS3"
-
-#. Type: select
#. Description
-#: ../libgcr410.templates:1002
+#: ../libgcr410.templates:1001
msgid "Serial port to which the smartcard reader is connected:"
msgstr "Port s�rie sur lequel est connect� le lecteur�:"
#. Type: select
#. Description
-#: ../libgcr410.templates:1002
+#: ../libgcr410.templates:1001
msgid ""
"The driver needs to know to which serial port the GemPlus GCR410 reader is "
"connected."
msgstr ""
"Libgcr410 doit conna�tre le port s�rie sur lequel est connect� le lecteur de "
"carte GemPlus GCR410."
+
+#~ msgid "ttyS0, ttyS1, ttyS2, ttyS3"
+#~ msgstr "ttyS0, ttyS1, ttyS2, ttyS3"
diff -Nru libgcr410-2.4.0.old/debian/po/it.po libgcr410-2.4.0/debian/po/it.po
--- libgcr410-2.4.0.old/debian/po/it.po 2010-04-22 06:20:36.000000000 +0200
+++ libgcr410-2.4.0/debian/po/it.po 2010-04-27 07:38:12.000000000 +0200
@@ -6,8 +6,8 @@
msgid ""
msgstr ""
"Project-Id-Version: libgcr410 italian debconf templates\n"
-"Report-Msgid-Bugs-To: [email protected]\n"
-"POT-Creation-Date: 2007-03-14 23:51+0100\n"
+"Report-Msgid-Bugs-To: [email protected]\n"
+"POT-Creation-Date: 2010-04-27 07:38+0200\n"
"PO-Revision-Date: 2006-11-22 21:30+0100\n"
"Last-Translator: Luca Monducci <[email protected]>\n"
"Language-Team: Italian <[email protected]>\n"
@@ -16,23 +16,20 @@
"Content-Transfer-Encoding: 8bit\n"
#. Type: select
-#. Choices
-#: ../libgcr410.templates:1001
-msgid "ttyS0, ttyS1, ttyS2, ttyS3"
-msgstr "ttyS0, ttyS1, ttyS2, ttyS3"
-
-#. Type: select
#. Description
-#: ../libgcr410.templates:1002
+#: ../libgcr410.templates:1001
msgid "Serial port to which the smartcard reader is connected:"
msgstr "Porta seriale a cui � collegato il lettore di smartcard:"
#. Type: select
#. Description
-#: ../libgcr410.templates:1002
+#: ../libgcr410.templates:1001
msgid ""
"The driver needs to know to which serial port the GemPlus GCR410 reader is "
"connected."
msgstr ""
"Il driver deve conoscere su quale porta seriale � collegato il lettore "
"GemPlus GCR410."
+
+#~ msgid "ttyS0, ttyS1, ttyS2, ttyS3"
+#~ msgstr "ttyS0, ttyS1, ttyS2, ttyS3"
diff -Nru libgcr410-2.4.0.old/debian/po/ja.po libgcr410-2.4.0/debian/po/ja.po
--- libgcr410-2.4.0.old/debian/po/ja.po 2010-04-22 06:20:36.000000000 +0200
+++ libgcr410-2.4.0/debian/po/ja.po 2010-04-27 07:38:12.000000000 +0200
@@ -15,8 +15,8 @@
msgid ""
msgstr ""
"Project-Id-Version: libgcr410 2.4.0-2\n"
-"Report-Msgid-Bugs-To: [email protected]\n"
-"POT-Creation-Date: 2007-03-14 23:51+0100\n"
+"Report-Msgid-Bugs-To: [email protected]\n"
+"POT-Creation-Date: 2010-04-27 07:38+0200\n"
"PO-Revision-Date: 2004-08-03 20:14+0900\n"
"Last-Translator: Hideki Yamane <[email protected]>\n"
"Language-Team: Japanese <[email protected]>\n"
@@ -25,23 +25,20 @@
"Content-Transfer-Encoding: 8bit\n"
#. Type: select
-#. Choices
-#: ../libgcr410.templates:1001
-msgid "ttyS0, ttyS1, ttyS2, ttyS3"
-msgstr "ttyS0, ttyS1, ttyS2, ttyS3"
-
-#. Type: select
#. Description
-#: ../libgcr410.templates:1002
+#: ../libgcr410.templates:1001
msgid "Serial port to which the smartcard reader is connected:"
msgstr "���ޡ��ȥ����ɥ������³����Ƥ��륷�ꥢ��ݡ���:"
#. Type: select
#. Description
-#: ../libgcr410.templates:1002
+#: ../libgcr410.templates:1001
msgid ""
"The driver needs to know to which serial port the GemPlus GCR410 reader is "
"connected."
msgstr ""
"�ɥ饤�Ф�ư��ˤϡ��ɤΥ��ꥢ��ݡ��Ȥ� GemPlus GCR410 ���������³�����"
"����Τ����Τ�ɬ�פ�����ޤ���"
+
+#~ msgid "ttyS0, ttyS1, ttyS2, ttyS3"
+#~ msgstr "ttyS0, ttyS1, ttyS2, ttyS3"
diff -Nru libgcr410-2.4.0.old/debian/po/nl.po libgcr410-2.4.0/debian/po/nl.po
--- libgcr410-2.4.0.old/debian/po/nl.po 2010-04-22 06:20:36.000000000 +0200
+++ libgcr410-2.4.0/debian/po/nl.po 2010-04-27 07:38:12.000000000 +0200
@@ -14,8 +14,8 @@
msgid ""
msgstr ""
"Project-Id-Version: ifd-gempc 0.8.0-5\n"
-"Report-Msgid-Bugs-To: [email protected]\n"
-"POT-Creation-Date: 2007-03-14 23:51+0100\n"
+"Report-Msgid-Bugs-To: [email protected]\n"
+"POT-Creation-Date: 2010-04-27 07:38+0200\n"
"PO-Revision-Date: 2004-04-04 21:58+0200\n"
"Last-Translator: Peter De Schrijver <[email protected]>\n"
"Language-Team: dutch <[email protected]>\n"
@@ -24,23 +24,20 @@
"Content-Transfer-Encoding: 8bit\n"
#. Type: select
-#. Choices
-#: ../libgcr410.templates:1001
-msgid "ttyS0, ttyS1, ttyS2, ttyS3"
-msgstr "ttyS0, ttyS1, ttyS2, ttyS3"
-
-#. Type: select
#. Description
-#: ../libgcr410.templates:1002
+#: ../libgcr410.templates:1001
msgid "Serial port to which the smartcard reader is connected:"
msgstr "Seri�le poort waar de smartcard lezer aan verbonden is:"
#. Type: select
#. Description
-#: ../libgcr410.templates:1002
+#: ../libgcr410.templates:1001
msgid ""
"The driver needs to know to which serial port the GemPlus GCR410 reader is "
"connected."
msgstr ""
"Het stuurprogramma moet weten met welke seri�le poort de GemPlus GCR410 "
"lezer verbonden is."
+
+#~ msgid "ttyS0, ttyS1, ttyS2, ttyS3"
+#~ msgstr "ttyS0, ttyS1, ttyS2, ttyS3"
diff -Nru libgcr410-2.4.0.old/debian/po/pt.po libgcr410-2.4.0/debian/po/pt.po
--- libgcr410-2.4.0.old/debian/po/pt.po 2010-04-22 06:20:36.000000000 +0200
+++ libgcr410-2.4.0/debian/po/pt.po 2010-04-27 07:38:12.000000000 +0200
@@ -6,8 +6,8 @@
msgid ""
msgstr ""
"Project-Id-Version: libgcr410 2.4.0-5\n"
-"Report-Msgid-Bugs-To: [email protected]\n"
-"POT-Creation-Date: 2007-03-14 23:51+0100\n"
+"Report-Msgid-Bugs-To: [email protected]\n"
+"POT-Creation-Date: 2010-04-27 07:38+0200\n"
"PO-Revision-Date: 2006-11-16 21:59+0000\n"
"Last-Translator: Rui Branco <[email protected]>\n"
"Language-Team: Portuguese <[email protected]>\n"
@@ -16,23 +16,20 @@
"Content-Transfer-Encoding: 8bit\n"
#. Type: select
-#. Choices
-#: ../libgcr410.templates:1001
-msgid "ttyS0, ttyS1, ttyS2, ttyS3"
-msgstr "ttyS0, ttyS1, ttyS2, ttyS3"
-
-#. Type: select
#. Description
-#: ../libgcr410.templates:1002
+#: ../libgcr410.templates:1001
msgid "Serial port to which the smartcard reader is connected:"
msgstr "Porta série a que o leitor smartcard está ligado:"
#. Type: select
#. Description
-#: ../libgcr410.templates:1002
+#: ../libgcr410.templates:1001
msgid ""
"The driver needs to know to which serial port the GemPlus GCR410 reader is "
"connected."
msgstr ""
"O controlador precisa de saber qual a porta série a que o leitor GemPlus "
"GCR410 está ligado."
+
+#~ msgid "ttyS0, ttyS1, ttyS2, ttyS3"
+#~ msgstr "ttyS0, ttyS1, ttyS2, ttyS3"
diff -Nru libgcr410-2.4.0.old/debian/po/pt_BR.po libgcr410-2.4.0/debian/po/pt_BR.po
--- libgcr410-2.4.0.old/debian/po/pt_BR.po 2010-04-22 06:20:36.000000000 +0200
+++ libgcr410-2.4.0/debian/po/pt_BR.po 2010-04-27 07:38:12.000000000 +0200
@@ -6,8 +6,8 @@
msgid ""
msgstr ""
"Project-Id-Version: 2.4.0\n"
-"Report-Msgid-Bugs-To: [email protected]\n"
-"POT-Creation-Date: 2007-03-14 23:51+0100\n"
+"Report-Msgid-Bugs-To: [email protected]\n"
+"POT-Creation-Date: 2010-04-27 07:38+0200\n"
"PO-Revision-Date: 2007-04-02 00:27-0300\n"
"Last-Translator: Felipe Augusto van de Wiel (faw) <[email protected]>\n"
"Language-Team: l10n portuguese <[email protected]>\n"
@@ -17,23 +17,20 @@
"pt_BR utf-8\n"
#. Type: select
-#. Choices
-#: ../libgcr410.templates:1001
-msgid "ttyS0, ttyS1, ttyS2, ttyS3"
-msgstr "ttyS0, ttyS1, ttyS2, ttyS3"
-
-#. Type: select
#. Description
-#: ../libgcr410.templates:1002
+#: ../libgcr410.templates:1001
msgid "Serial port to which the smartcard reader is connected:"
msgstr "Porta serial na qual o leitor \"smartcard\" está conectado:"
#. Type: select
#. Description
-#: ../libgcr410.templates:1002
+#: ../libgcr410.templates:1001
msgid ""
"The driver needs to know to which serial port the GemPlus GCR410 reader is "
"connected."
msgstr ""
"O controlador de dispositivo precisa saber em qual porta serial o leitor "
"GemPlus GCR410 está conectado."
+
+#~ msgid "ttyS0, ttyS1, ttyS2, ttyS3"
+#~ msgstr "ttyS0, ttyS1, ttyS2, ttyS3"
diff -Nru libgcr410-2.4.0.old/debian/po/ru.po libgcr410-2.4.0/debian/po/ru.po
--- libgcr410-2.4.0.old/debian/po/ru.po 2010-04-22 06:20:36.000000000 +0200
+++ libgcr410-2.4.0/debian/po/ru.po 2010-04-27 07:38:12.000000000 +0200
@@ -14,8 +14,8 @@
msgid ""
msgstr ""
"Project-Id-Version: 2.4.0-6\n"
-"Report-Msgid-Bugs-To: [email protected]\n"
-"POT-Creation-Date: 2007-03-14 23:51+0100\n"
+"Report-Msgid-Bugs-To: [email protected]\n"
+"POT-Creation-Date: 2010-04-27 07:38+0200\n"
"PO-Revision-Date: 2006-12-24 21:33+0300\n"
"Last-Translator: Yuri Kozlov <[email protected]>\n"
"Language-Team: Russian <[email protected]>\n"
@@ -27,24 +27,21 @@
"10<=4 && (n%100<10 || n%100>=20) ? 1 : 2);\n"
#. Type: select
-#. Choices
-#: ../libgcr410.templates:1001
-msgid "ttyS0, ttyS1, ttyS2, ttyS3"
-msgstr "ttyS0, ttyS1, ttyS2, ttyS3"
-
-#. Type: select
#. Description
-#: ../libgcr410.templates:1002
+#: ../libgcr410.templates:1001
msgid "Serial port to which the smartcard reader is connected:"
msgstr ""
"Последовательный порт, к которому подключено устройство чтения смарткарт:"
#. Type: select
#. Description
-#: ../libgcr410.templates:1002
+#: ../libgcr410.templates:1001
msgid ""
"The driver needs to know to which serial port the GemPlus GCR410 reader is "
"connected."
msgstr ""
"Для драйвера требуется информация о том, к какому последовательному порту "
"подключено устройства чтения смарткарт GCR410."
+
+#~ msgid "ttyS0, ttyS1, ttyS2, ttyS3"
+#~ msgstr "ttyS0, ttyS1, ttyS2, ttyS3"
diff -Nru libgcr410-2.4.0.old/debian/po/sv.po libgcr410-2.4.0/debian/po/sv.po
--- libgcr410-2.4.0.old/debian/po/sv.po 2010-04-22 06:20:36.000000000 +0200
+++ libgcr410-2.4.0/debian/po/sv.po 2010-04-27 07:38:12.000000000 +0200
@@ -8,13 +8,13 @@
# or http://www.debian.org/intl/l10n/po-debconf/README-trans
# Developers do not need to manually edit POT or PO files.
# , fuzzy
-#
-#
+#
+#
msgid ""
msgstr ""
"Project-Id-Version: libgcr410 2.4.0-4\n"
-"Report-Msgid-Bugs-To: [email protected]\n"
-"POT-Creation-Date: 2007-03-14 23:51+0100\n"
+"Report-Msgid-Bugs-To: [email protected]\n"
+"POT-Creation-Date: 2010-04-27 07:38+0200\n"
"PO-Revision-Date: 2005-10-04 19:11+0200\n"
"Last-Translator: Daniel Nylander <[email protected]>\n"
"Language-Team: Swedish <[email protected]>\n"
@@ -23,23 +23,20 @@
"Content-Transfer-Encoding: 8bit\n"
#. Type: select
-#. Choices
-#: ../libgcr410.templates:1001
-msgid "ttyS0, ttyS1, ttyS2, ttyS3"
-msgstr "ttyS0, ttyS1, ttyS2, ttyS3"
-
-#. Type: select
#. Description
-#: ../libgcr410.templates:1002
+#: ../libgcr410.templates:1001
msgid "Serial port to which the smartcard reader is connected:"
msgstr "Seriellporten som smartkortsl�saren �r inkopplad p�:"
#. Type: select
#. Description
-#: ../libgcr410.templates:1002
+#: ../libgcr410.templates:1001
msgid ""
"The driver needs to know to which serial port the GemPlus GCR410 reader is "
"connected."
msgstr ""
"Drivrutinen beh�ver veta p� vilken seriellport som GemPlus GCR410-l�sare �r "
"inkopplad p�."
+
+#~ msgid "ttyS0, ttyS1, ttyS2, ttyS3"
+#~ msgstr "ttyS0, ttyS1, ttyS2, ttyS3"
diff -Nru libgcr410-2.4.0.old/debian/po/templates.pot libgcr410-2.4.0/debian/po/templates.pot
--- libgcr410-2.4.0.old/debian/po/templates.pot 2010-04-22 06:20:36.000000000 +0200
+++ libgcr410-2.4.0/debian/po/templates.pot 2010-04-27 07:38:12.000000000 +0200
@@ -7,8 +7,8 @@
msgid ""
msgstr ""
"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: [email protected]\n"
-"POT-Creation-Date: 2007-03-14 23:51+0100\n"
+"Report-Msgid-Bugs-To: [email protected]\n"
+"POT-Creation-Date: 2010-04-27 07:38+0200\n"
"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
"Last-Translator: FULL NAME <em...@address>\n"
"Language-Team: LANGUAGE <[email protected]>\n"
@@ -17,20 +17,14 @@
"Content-Transfer-Encoding: 8bit\n"
#. Type: select
-#. Choices
-#: ../libgcr410.templates:1001
-msgid "ttyS0, ttyS1, ttyS2, ttyS3"
-msgstr ""
-
-#. Type: select
#. Description
-#: ../libgcr410.templates:1002
+#: ../libgcr410.templates:1001
msgid "Serial port to which the smartcard reader is connected:"
msgstr ""
#. Type: select
#. Description
-#: ../libgcr410.templates:1002
+#: ../libgcr410.templates:1001
msgid ""
"The driver needs to know to which serial port the GemPlus GCR410 reader is "
"connected."
diff -Nru libgcr410-2.4.0.old/debian/po/vi.po libgcr410-2.4.0/debian/po/vi.po
--- libgcr410-2.4.0.old/debian/po/vi.po 2010-04-22 06:20:36.000000000 +0200
+++ libgcr410-2.4.0/debian/po/vi.po 2010-04-27 07:38:12.000000000 +0200
@@ -1,12 +1,12 @@
# Vietnamese Translation for libgcr410.
# Copyright © 2005 Free Software Foundation, Inc.
# Clytie Siddall <[email protected]>, 2005.
-#
+#
msgid ""
msgstr ""
"Project-Id-Version: libgcr410 2.4.0-4\n"
-"Report-Msgid-Bugs-To: [email protected]\n"
-"POT-Creation-Date: 2007-03-14 23:51+0100\n"
+"Report-Msgid-Bugs-To: [email protected]\n"
+"POT-Creation-Date: 2010-04-27 07:38+0200\n"
"PO-Revision-Date: 2005-06-06 23:05+0930\n"
"Last-Translator: Clytie Siddall <[email protected]>\n"
"Language-Team: Vietnamese <[email protected]>\n"
@@ -16,23 +16,20 @@
"Plural-Forms: nplurals=1; plural=0\n"
#. Type: select
-#. Choices
-#: ../libgcr410.templates:1001
-msgid "ttyS0, ttyS1, ttyS2, ttyS3"
-msgstr "ttyS0, ttyS1, ttyS2, ttyS3"
-
-#. Type: select
#. Description
-#: ../libgcr410.templates:1002
+#: ../libgcr410.templates:1001
msgid "Serial port to which the smartcard reader is connected:"
msgstr "Máy đọc thẻ thông minh có kết nối đến cổng nối tiếp này:"
#. Type: select
#. Description
-#: ../libgcr410.templates:1002
+#: ../libgcr410.templates:1001
msgid ""
"The driver needs to know to which serial port the GemPlus GCR410 reader is "
"connected."
msgstr ""
"Cần phải cho trình hỗ trợ thiết bị ấy thông tin về cổng nối tiếp nào có máy "
"đọc GemPlus GCR410 kết nối đến nó."
+
+#~ msgid "ttyS0, ttyS1, ttyS2, ttyS3"
+#~ msgstr "ttyS0, ttyS1, ttyS2, ttyS3"
diff -Nru libgcr410-2.4.0.old/debian/rules libgcr410-2.4.0/debian/rules
--- libgcr410-2.4.0.old/debian/rules 2010-04-22 06:20:36.000000000 +0200
+++ libgcr410-2.4.0/debian/rules 2010-05-04 10:44:16.000000000 +0200
@@ -1,7 +1,5 @@
#!/usr/bin/make -f
-export DH_COMPAT=3
-
build: build-stamp
build-stamp:
dh_testdir
@@ -12,14 +10,14 @@
dh_testdir
dh_testroot
rm -f build-stamp
- -$(MAKE) clean
+ [ ! -f Makefile ] || $(MAKE) clean
debconf-updatepo
dh_clean
install: build
dh_testdir
dh_testroot
- dh_clean -k
+ dh_prep
dh_installdirs
cp libgcr410.so $(CURDIR)/debian/libgcr410/usr/lib/pcsc/drivers/serial
diff -Nru libgcr410-2.4.0.old/debian/source/format libgcr410-2.4.0/debian/source/format
--- libgcr410-2.4.0.old/debian/source/format 1970-01-01 01:00:00.000000000 +0100
+++ libgcr410-2.4.0/debian/source/format 2010-05-04 07:39:54.000000000 +0200
@@ -0,0 +1 @@
+1.0
signature.asc
Description: Digital signature
