More info: I also have another core2duo system, with 2 dualcore processor though. But this system has a motherboard with the same chipset: G965. And...it has the same problem! Serial port not functioning.
On Sat, Dec 29, 2007 at 02:13:14PM +0100, Folkert van Heusden wrote: > If I open the device (eg cat /dev/ttyS0) the interrupt does show up. > Still no data from the device on it. If I connect the device to an other > serial port (e.g. an usb converter) I do see data so I don't think the > device connected is the problem. > > belle:/home/folkert# cat /proc/tty/driver/serial > serinfo:1.0 driver revision: > 0: uart:16550A port:000003F8 irq:4 tx:157 rx:0 RTS|DTR > 1: uart:unknown port:000002F8 irq:3 > 2: uart:unknown port:000003E8 irq:4 > 3: uart:unknown port:000002E8 irq:3 > > the motherboard (it is an on-board port) is a gigabyte 965G-DS3. > > I also tried an other device, nothing came in for that device too (known > good device; right as we speak it works fine on an other system). > > > Folkert van Heusden > > -- > MultiTail cok yonlu kullanimli bir program, loglari okumak, verilen > kommandolari yerine getirebilen. Filter, renk verme, merge, 'diff- > view', vs. http://www.vanheusden.com/multitail/ > ---------------------------------------------------------------------- > Phone: +31-6-41278122, PGP-key: 1F28D8AE, www.vanheusden.com Folkert van Heusden -- Feeling generous? -> http://www.vanheusden.com/wishlist.php ---------------------------------------------------------------------- Phone: +31-6-41278122, PGP-key: 1F28D8AE, www.vanheusden.com -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
