If I open the device (eg cat /dev/ttyS0) the interrupt does show up. Still no data from the device on it. If I connect the device to an other serial port (e.g. an usb converter) I do see data so I don't think the device connected is the problem.
belle:/home/folkert# cat /proc/tty/driver/serial serinfo:1.0 driver revision: 0: uart:16550A port:000003F8 irq:4 tx:157 rx:0 RTS|DTR 1: uart:unknown port:000002F8 irq:3 2: uart:unknown port:000003E8 irq:4 3: uart:unknown port:000002E8 irq:3 the motherboard (it is an on-board port) is a gigabyte 965G-DS3. I also tried an other device, nothing came in for that device too (known good device; right as we speak it works fine on an other system). Folkert van Heusden -- MultiTail cok yonlu kullanimli bir program, loglari okumak, verilen kommandolari yerine getirebilen. Filter, renk verme, merge, 'diff- view', vs. http://www.vanheusden.com/multitail/ ---------------------------------------------------------------------- Phone: +31-6-41278122, PGP-key: 1F28D8AE, www.vanheusden.com -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
