Package: cdrecord
Version: 4:2.01+01a03-5
Severity: normal
Hi,
I have an IDE DVD writer connected to a USB to IDE adaptor. I get errors
trying to burn DVDs or CDRWs, but I did succeeded erasing a CDRW.
Here is the output I get:
/usr/bin/cdrecord: Warning: Running on Linux-2.6.17-1-686
/usr/bin/cdrecord: There are unsettled issues with Linux-2.5 and newer.
/usr/bin/cdrecord: If you have unexpected problems, please try Linux-2.4 or
Solaris.
scsidev: '7,0,0'
scsibus: 7 target: 0 lun: 0
Linux sg driver version: 3.5.33
/usr/bin/cdrecord: Warning: using inofficial version of libscg
(debian-0.8debian2 '@(#)scsitransp.c 1.91 04/06/17 Copyright
1988,1995,2000-2004 J. Schilling').
SCSI buffer size: 64512
/usr/bin/cdrecord: This version of cdrecord does not include DVD-R/DVD-RW
support code.
/usr/bin/cdrecord: See /usr/share/doc/cdrecord/README.DVD.Debian for details on
DVD support.
Cdrecord-Clone 2.01.01a03 (i686-pc-linux-gnu) Copyright (C) 1995-2005 Joerg
Schilling
NOTE: this version of cdrecord is an inofficial (modified) release of cdrecord
and thus may have bugs that are not present in the original version.
Please send bug reports and support requests to <[EMAIL PROTECTED]>.
The original author should not be bothered with problems of this version.
TOC Type: 0 = CD-DA
Using libscg version 'debian-0.8debian2'.
Driveropts: 'burnfree'
atapi: 1
Device type : Removable CD-ROM
Version : 0
Response Format: 2
Capabilities :
Vendor_info : 'HL-DT-ST'
Identifikation : 'DVDRAM GSA-H10A '
Revision : 'JL02'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Current: 0x000A
Profile: 0x0012
Profile: 0x0011
Profile: 0x0015
Profile: 0x0016
Profile: 0x0014
Profile: 0x0013
Profile: 0x001A
Profile: 0x001B
Profile: 0x002B
Profile: 0x0010
Profile: 0x0009
Profile: 0x000A (current)
Profile: 0x0008
Profile: 0x0002
/usr/bin/cdrecord: Cannot allocate memory. read buffer: scsi sendcmd: no error
CDB: 3C 00 00 00 00 00 00 FC 00 00
status: 0x0 (GOOD STATUS)
cmd finished after 0.000s timeout 200s
Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
Driver flags : MMC-3 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
Drive buf size : 1053696 = 1029 KB
FIFO size : 4194304 = 4096 KB
pregap1: -1
Track 01: audio 301 MB (29:50.90) no preemp swab copy
Track 02: audio 273 MB (27:07.61) no preemp swab copy
Total size: 575 MB (56:58.52) = 256389 sectors
Lout start: 575 MB (57:00/39) = 256389 sectors
Current Secsize: 2048
ATIP info from disk:
Indicated writing power: 3
Reference speed: 6
Is not unrestricted
Is erasable
Disk sub type: High speed Rewritable (CAV) media (1)
ATIP start of lead in: -11240 (97:32/10)
ATIP start of lead out: 359849 (79:59/74)
1T speed low: 4 1T speed high: 10
2T speed low: 4 2T speed high: 0 (reserved val 6)
power mult factor: 1 5
recommended erase/write power: 5
A1 values: 24 1A D8
A2 values: 26 B2 4A
Disk type: Phase change
Manuf. index: 27
Manufacturer: Prodisc Technology Inc.
Blocks total: 359849 Blocks current: 359849 Blocks remaining: 103460
Starting to write CD/DVD at speed 10 in real SAO mode for single session.
Last chance to quit, starting real write in 3 seconds.
2 seconds.
1 seconds.
0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
BURN-Free is OFF.
Turning BURN-Free on
Performing OPC...
Sending CUE sheet...
/usr/bin/cdrecord: WARNING: Drive returns wrong startsec (0) using -150
/usr/bin/cdrecord: Cannot allocate memory. write_g1: scsi sendcmd: no error
CDB: 2A 00 FF FF FF 6A 00 00 1B 00
status: 0x0 (GOOD STATUS)
cmd finished after 0.000s timeout 200s
Writing pregap for track 1 at -150
write track pad data: error after 0 bytes
BFree: 1029 K BSize: 1029 K
Starting new track at sector: 0
Track 01: 0 of 301 MB written.
/usr/bin/cdrecord: Cannot allocate memory. write_g1: scsi sendcmd: no error
CDB: 2A 00 00 00 00 00 00 00 1B 00
status: 0x0 (GOOD STATUS)
cmd finished after 0.000s timeout 200s
/usr/bin/cdrecord: A write error occured.
/usr/bin/cdrecord: Please properly read the error message above.
write track data: error after 0 bytes
Writing time: 5.064s
Average write speed 682.5x.
Fixating...
Fixating time: 0.004s
/usr/bin/cdrecord: fifo had 64 puts and 1 gets.
/usr/bin/cdrecord: fifo was 0 times empty and 0 times full, min fill was 100%.
cdrecord command:
-----------------------
/usr/bin/cdrecord.mmap -v gracetime=2 dev=7,0,0 speed=10 -dao
driveropts=burnfree -overburn -useinfo -audio -shorttrack
/home/haggai/CDs/k3b_audio_0_01.inf /home/haggai/CDs/k3b_audio_0_02.inf
Thanks,
Haggai Eran
-- System Information:
Debian Release: testing/unstable
APT prefers testing
APT policy: (550, 'testing'), (99, 'unstable')
Architecture: i386 (i686)
Shell: /bin/sh linked to /bin/bash
Kernel: Linux 2.6.17-1-686
Locale: LANG=he_IL.UTF-8, LC_CTYPE=he_IL.UTF-8 (charmap=UTF-8)
Versions of packages cdrecord depends on:
ii debconf [debconf-2.0] 1.5.2 Debian configuration management sy
ii libc6 2.3.6-15 GNU C Library: Shared libraries
ii libcap1 1:1.10-14 support for getting/setting POSIX.
ii makedev 2.3.1-81 creates device files in /dev
Versions of packages cdrecord recommends:
ii mkisofs 4:2.01+01a03-5 Creates ISO-9660 CD-ROM filesystem
-- debconf information:
cdrecord/MAKEDEVNEW: true
cdrecord/do_it_yourself:
* cdrecord/SUID_bit: true
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
