Package: src:linux
Version: 4.2.3-2
Severity: important
Dear Maintainer,
my wireless chip just don't work with any kernel of the 4.2.0 series, so I have
to boot 4.1.0 in order to have it working.
Most of the times it connects to my wifi router but is unable to go outside and
connect to any server, then I see that connmand looses its connection and tries
to estabilish a new one, and it goes on this way disconnecting and
reconnecting.
Sometime it connects and start working, but it lasts for a few time; it can be
5 minutes or even 1 hour, then it looses connection again.
The driver in use is ath9k, lspci reports a "Qualcomm Atheros AR928X Wireless
Network Adapter (PCI-Express)" controller.
I can use the ethernet controller, which is what I'm doing now to report this
bug, but it's a laptop and so wlan is needed.
Thanks
Massimo Maiurana
*** Reporter, please consider answering these questions, where appropriate ***
* What led up to the situation?
* What exactly did you do (or not do) that was effective (or
ineffective)?
* What was the outcome of this action?
* What outcome did you expect instead?
*** End of the template - remove these template lines ***
-- Package-specific info:
** Version:
Linux version 4.2.0-1-amd64 (debian-ker...@lists.debian.org) (gcc version 4.9.3
(Debian 4.9.3-4) ) #1 SMP Debian 4.2.3-2 (2015-10-14)
** Command line:
BOOT_IMAGE=/boot/vmlinuz-4.2.0-1-amd64
root=UUID=543b6631-a12b-48ee-ae0c-cb1a8f9f8249 ro init=/lib/systemd/systemd
quiet
** Tainted: O (4096)
* Out-of-tree module has been loaded.
** Kernel log:
[ 191.633757] ath: EEPROM indicates we should expect a country code
[ 191.633759] ath: doing EEPROM country->regdmn map search
[ 191.633761] ath: country maps to regdmn code: 0x37
[ 191.633762] ath: Country alpha2 being used: IT
[ 191.633764] ath: Regpair used: 0x37
[ 191.633765] ath: regdomain 0x817c dynamically updated by country IE
[ 191.633817] cfg80211: Regulatory domain changed to country: IT
[ 191.633819] cfg80211: DFS Master region: ETSI
[ 191.633820] cfg80211: (start_freq - end_freq @ bandwidth),
(max_antenna_gain, max_eirp), (dfs_cac_time)
[ 191.633823] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000
mBm), (N/A)
[ 191.633826] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz
AUTO), (N/A, 2000 mBm), (N/A)
[ 191.633829] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz
AUTO), (N/A, 2000 mBm), (0 s)
[ 191.633831] cfg80211: (5490000 KHz - 5710000 KHz @ 160000 KHz), (N/A, 2700
mBm), (0 s)
[ 191.633833] cfg80211: (57000000 KHz - 66000000 KHz @ 2160000 KHz), (N/A,
4000 mBm), (N/A)
[ 204.477261] wlan0: deauthenticated from 78:6a:89:72:14:d0 (Reason:
3=DEAUTH_LEAVING)
[ 204.540771] cfg80211: World regulatory domain updated:
[ 204.540777] cfg80211: DFS Master region: unset
[ 204.540779] cfg80211: (start_freq - end_freq @ bandwidth),
(max_antenna_gain, max_eirp), (dfs_cac_time)
[ 204.540783] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000
mBm), (N/A)
[ 204.540785] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000
mBm), (N/A)
[ 204.540788] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000
mBm), (N/A)
[ 204.540790] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz
AUTO), (N/A, 2000 mBm), (N/A)
[ 204.540793] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz
AUTO), (N/A, 2000 mBm), (0 s)
[ 204.540795] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000
mBm), (0 s)
[ 204.540798] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000
mBm), (N/A)
[ 204.540800] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0
mBm), (N/A)
[ 204.543862] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 205.608866] wlan0: authenticate with 78:6a:89:72:14:d0
[ 205.637189] wlan0: send auth to 78:6a:89:72:14:d0 (try 1/3)
[ 205.638914] wlan0: authenticated
[ 205.640110] wlan0: associate with 78:6a:89:72:14:d0 (try 1/3)
[ 205.644088] wlan0: RX AssocResp from 78:6a:89:72:14:d0 (capab=0x431 status=0
aid=1)
[ 205.644207] wlan0: associated
[ 205.644257] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 205.654769] ath: EEPROM regdomain: 0x817c
[ 205.654775] ath: EEPROM indicates we should expect a country code
[ 205.654778] ath: doing EEPROM country->regdmn map search
[ 205.654780] ath: country maps to regdmn code: 0x37
[ 205.654782] ath: Country alpha2 being used: IT
[ 205.654783] ath: Regpair used: 0x37
[ 205.654786] ath: regdomain 0x817c dynamically updated by country IE
[ 205.654839] cfg80211: Regulatory domain changed to country: IT
[ 205.654841] cfg80211: DFS Master region: ETSI
[ 205.654843] cfg80211: (start_freq - end_freq @ bandwidth),
(max_antenna_gain, max_eirp), (dfs_cac_time)
[ 205.654847] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000
mBm), (N/A)
[ 205.654851] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz
AUTO), (N/A, 2000 mBm), (N/A)
[ 205.654854] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz
AUTO), (N/A, 2000 mBm), (0 s)
[ 205.654858] cfg80211: (5490000 KHz - 5710000 KHz @ 160000 KHz), (N/A, 2700
mBm), (0 s)
[ 205.654861] cfg80211: (57000000 KHz - 66000000 KHz @ 2160000 KHz), (N/A,
4000 mBm), (N/A)
[ 223.477527] wlan0: deauthenticated from 78:6a:89:72:14:d0 (Reason:
3=DEAUTH_LEAVING)
[ 223.558140] cfg80211: World regulatory domain updated:
[ 223.558148] cfg80211: DFS Master region: unset
[ 223.558150] cfg80211: (start_freq - end_freq @ bandwidth),
(max_antenna_gain, max_eirp), (dfs_cac_time)
[ 223.558154] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000
mBm), (N/A)
[ 223.558156] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000
mBm), (N/A)
[ 223.558158] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000
mBm), (N/A)
[ 223.558161] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz
AUTO), (N/A, 2000 mBm), (N/A)
[ 223.558164] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz
AUTO), (N/A, 2000 mBm), (0 s)
[ 223.558166] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000
mBm), (0 s)
[ 223.558168] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000
mBm), (N/A)
[ 223.558170] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0
mBm), (N/A)
[ 223.607145] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 224.584610] wlan0: authenticate with 78:6a:89:72:14:d0
[ 224.633345] wlan0: send auth to 78:6a:89:72:14:d0 (try 1/3)
[ 224.636120] wlan0: authenticated
[ 224.640062] wlan0: associate with 78:6a:89:72:14:d0 (try 1/3)
[ 224.644041] wlan0: RX AssocResp from 78:6a:89:72:14:d0 (capab=0x431 status=0
aid=1)
[ 224.644166] wlan0: associated
[ 224.644225] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 224.652817] ath: EEPROM regdomain: 0x817c
[ 224.652823] ath: EEPROM indicates we should expect a country code
[ 224.652825] ath: doing EEPROM country->regdmn map search
[ 224.652826] ath: country maps to regdmn code: 0x37
[ 224.652828] ath: Country alpha2 being used: IT
[ 224.652829] ath: Regpair used: 0x37
[ 224.652831] ath: regdomain 0x817c dynamically updated by country IE
[ 224.652884] cfg80211: Regulatory domain changed to country: IT
[ 224.652886] cfg80211: DFS Master region: ETSI
[ 224.652887] cfg80211: (start_freq - end_freq @ bandwidth),
(max_antenna_gain, max_eirp), (dfs_cac_time)
[ 224.652890] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000
mBm), (N/A)
[ 224.652893] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz
AUTO), (N/A, 2000 mBm), (N/A)
[ 224.652896] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz
AUTO), (N/A, 2000 mBm), (0 s)
[ 224.652898] cfg80211: (5490000 KHz - 5710000 KHz @ 160000 KHz), (N/A, 2700
mBm), (0 s)
[ 224.652900] cfg80211: (57000000 KHz - 66000000 KHz @ 2160000 KHz), (N/A,
4000 mBm), (N/A)
[ 229.229083] atl1c 0000:09:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full
Duplex>
[ 229.229106] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 234.477775] wlan0: deauthenticated from 78:6a:89:72:14:d0 (Reason:
3=DEAUTH_LEAVING)
[ 234.539244] cfg80211: World regulatory domain updated:
[ 234.539250] cfg80211: DFS Master region: unset
[ 234.539252] cfg80211: (start_freq - end_freq @ bandwidth),
(max_antenna_gain, max_eirp), (dfs_cac_time)
[ 234.539255] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000
mBm), (N/A)
[ 234.539257] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000
mBm), (N/A)
[ 234.539259] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000
mBm), (N/A)
[ 234.539262] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz
AUTO), (N/A, 2000 mBm), (N/A)
[ 234.539265] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz
AUTO), (N/A, 2000 mBm), (0 s)
[ 234.539267] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000
mBm), (0 s)
[ 234.539269] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000
mBm), (N/A)
[ 234.539272] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0
mBm), (N/A)
[ 234.719034] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 403.464857] perf interrupt took too long (2509 > 2500), lowering
kernel.perf_event_max_sample_rate to 50000
** Model information
sys_vendor: Acer
product_name: Extensa 5635Z
product_version: Not Applicable
chassis_vendor: Acer
chassis_version: N/A
bios_vendor: Phoenix
bios_version: V1.3311
board_vendor: Acer
board_name: BA50-MV
board_version: Not Applicable
** Loaded modules:
sha256_ssse3
sha256_generic
hmac
drbg
ansi_cprng
ctr
ccm
pci_stub
bnep
vboxpci(O)
vboxnetadp(O)
vboxnetflt(O)
bluetooth
vboxdrv(O)
binfmt_misc
nfsd
auth_rpcgss
oid_registry
nfs_acl
nfs
lockd
grace
fscache
sunrpc
uvcvideo
videobuf2_vmalloc
videobuf2_memops
videobuf2_core
v4l2_common
videodev
media
arc4
ath9k
ath9k_common
ath9k_hw
ath
iTCO_wdt
joydev
mac80211
iTCO_vendor_support
acer_wmi
sparse_keymap
mxm_wmi
evdev
psmouse
cfg80211
coretemp
rfkill
pcspkr
serio_raw
lpc_ich
sg
mfd_core
i2c_i801
snd_hda_codec_conexant
snd_hda_codec_generic
snd_hda_intel
snd_hda_codec
snd_hda_core
i915
snd_hwdep
snd_pcm
snd_timer
snd
wmi
drm_kms_helper
drm
i2c_algo_bit
shpchp
soundcore
ac
battery
video
button
acpi_cpufreq
processor
loop
parport_pc
ppdev
lp
parport
autofs4
ext4
crc16
mbcache
jbd2
sr_mod
sd_mod
cdrom
ahci
libahci
libata
scsi_mod
atl1c
thermal
thermal_sys
uhci_hcd
ehci_pci
ehci_hcd
usbcore
usb_common
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Mobile 4 Series Chipset Memory
Controller Hub [8086:2a40] (rev 07)
Subsystem: Acer Incorporated [ALI] Device [1025:0253]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 4 Series
Chipset Integrated Graphics Controller [8086:2a42] (rev 07) (prog-if 00 [VGA
controller])
Subsystem: Acer Incorporated [ALI] Device [1025:0253]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 28
Region 0: Memory at f0000000 (64-bit, non-prefetchable) [size=4M]
Region 2: Memory at d0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at 1800 [size=8]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915
00:02.1 Display controller [0380]: Intel Corporation Mobile 4 Series Chipset
Integrated Graphics Controller [8086:2a43] (rev 07)
Subsystem: Acer Incorporated [ALI] Device [1025:0253]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at f0400000 (64-bit, non-prefetchable) [size=1M]
Capabilities: <access denied>
00:1a.0 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #4 [8086:2937] (rev 03) (prog-if 00 [UHCI])
Subsystem: Acer Incorporated [ALI] Device [1025:0253]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at 1820 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1a.1 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #5 [8086:2938] (rev 03) (prog-if 00 [UHCI])
Subsystem: Acer Incorporated [ALI] Device [1025:0253]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at 1840 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1a.7 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI
Controller #2 [8086:293c] (rev 03) (prog-if 20 [EHCI])
Subsystem: Acer Incorporated [ALI] Device [1025:0253]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 19
Region 0: Memory at f0904800 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:1b.0 Audio device [0403]: Intel Corporation 82801I (ICH9 Family) HD Audio
Controller [8086:293e] (rev 03)
Subsystem: Acer Incorporated [ALI] Device [1025:0253]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 29
Region 0: Memory at f0700000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express
Port 1 [8086:2940] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 24
Bus: primary=00, secondary=02, subordinate=04, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: 80000000-801fffff
Prefetchable memory behind bridge: 0000000080200000-00000000803fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.3 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express
Port 4 [8086:2946] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin D routed to IRQ 25
Bus: primary=00, secondary=07, subordinate=07, sec-latency=0
I/O behind bridge: 00003000-00003fff
Memory behind bridge: 80400000-806fffff
Prefetchable memory behind bridge: 0000000080700000-00000000808fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.5 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express
Port 6 [8086:294a] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 26
Bus: primary=00, secondary=09, subordinate=09, sec-latency=0
I/O behind bridge: 00004000-00004fff
Memory behind bridge: 80900000-80bfffff
Prefetchable memory behind bridge: 0000000080c00000-0000000080dfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #1 [8086:2934] (rev 03) (prog-if 00 [UHCI])
Subsystem: Acer Incorporated [ALI] Device [1025:0253]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 4: I/O ports at 1860 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.1 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #2 [8086:2935] (rev 03) (prog-if 00 [UHCI])
Subsystem: Acer Incorporated [ALI] Device [1025:0253]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at 1880 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.2 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #3 [8086:2936] (rev 03) (prog-if 00 [UHCI])
Subsystem: Acer Incorporated [ALI] Device [1025:0253]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at 18a0 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.3 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #6 [8086:2939] (rev 03) (prog-if 00 [UHCI])
Subsystem: Acer Incorporated [ALI] Device [1025:0253]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 16
Region 4: I/O ports at 18c0 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.7 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI
Controller #1 [8086:293a] (rev 03) (prog-if 20 [EHCI])
Subsystem: Acer Incorporated [ALI] Device [1025:0253]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at f0904c00 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge
[8086:2448] (rev 93) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=0a, subordinate=0a, sec-latency=0
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation ICH9M LPC Interface Controller
[8086:2919] (rev 03)
Subsystem: Acer Incorporated [ALI] Device [1025:0253]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: lpc_ich
00:1f.2 SATA controller [0106]: Intel Corporation 82801IBM/IEM (ICH9M/ICH9M-E)
4 port SATA Controller [AHCI mode] [8086:2929] (rev 03) (prog-if 01 [AHCI 1.0])
Subsystem: Acer Incorporated [ALI] Device [1025:0253]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 27
Region 0: I/O ports at 1818 [size=8]
Region 1: I/O ports at 180c [size=4]
Region 2: I/O ports at 1810 [size=8]
Region 3: I/O ports at 1808 [size=4]
Region 4: I/O ports at 18e0 [size=32]
Region 5: Memory at f0904000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:1f.3 SMBus [0c05]: Intel Corporation 82801I (ICH9 Family) SMBus Controller
[8086:2930] (rev 03)
Subsystem: Acer Incorporated [ALI] Device [1025:0253]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 19
Region 0: Memory at 80e00000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 1c00 [size=32]
07:00.0 Network controller [0280]: Qualcomm Atheros AR928X Wireless Network
Adapter (PCI-Express) [168c:002a] (rev 01)
Subsystem: Foxconn International, Inc. T77H047.31 802.11bgn Wireless
Half-size Mini PCIe Card [AR9283] [105b:e01f]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 19
Region 0: Memory at 80400000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: ath9k
09:00.0 Ethernet controller [0200]: Qualcomm Atheros AR8131 Gigabit Ethernet
[1969:1063] (rev c0)
Subsystem: Acer Incorporated [ALI] Device [1025:0253]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 30
Region 0: Memory at 80900000 (64-bit, non-prefetchable) [size=256K]
Region 2: I/O ports at 4000 [size=128]
Capabilities: <access denied>
Kernel driver in use: atl1c
** USB devices:
Bus 002 Device 002: ID 064e:a103 Suyin Corp. Acer/HP Integrated Webcam [CN0314]
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
-- System Information:
Debian Release: stretch/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: amd64 (x86_64)
Foreign Architectures: i386
Kernel: Linux 4.2.0-1-amd64 (SMP w/2 CPU cores)
Locale: LANG=it_IT.utf8, LC_CTYPE=it_IT.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
Versions of packages linux-image-4.2.0-1-amd64 depends on:
ii debconf [debconf-2.0] 1.5.57
ii initramfs-tools [linux-initramfs-tool] 0.120
ii kmod 21-1
ii linux-base 4.0
Versions of packages linux-image-4.2.0-1-amd64 recommends:
ii firmware-linux-free 3.4
ii irqbalance 1.0.9-1
Versions of packages linux-image-4.2.0-1-amd64 suggests:
pn debian-kernel-handbook <none>
ii grub-pc 2.02~beta2-29
pn linux-doc-4.2 <none>
Versions of packages linux-image-4.2.0-1-amd64 is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux <none>
pn firmware-linux-nonfree <none>
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
pn firmware-realtek <none>
pn xen-hypervisor <none>
-- debconf information:
linux-image-4.2.0-1-amd64/postinst/mips-initrd-4.2.0-1-amd64:
linux-image-4.2.0-1-amd64/prerm/removing-running-kernel-4.2.0-1-amd64: true
linux-image-4.2.0-1-amd64/postinst/depmod-error-initrd-4.2.0-1-amd64: false
