On Wed, May 09, 2007 at 09:39:04PM +0200, Frans Pop wrote: > On Wednesday 09 May 2007 20:40, John Morrissey wrote: > > The local disks are detected without a problem; the /dev/sd* symlink is > > set correctly, and I can fdisk(8) the drives with no problem. However, > > the install displays disk-detect/module_select: > > > > No disk drive was detected. If you know the name of the driver needed > > by your disk drive, you can select it from the list. > > Driver needed for your disk drive: > > It looks like the utility 'parted_devices' is not returning any output. > What do you get if you run that command on VT2 after the first time the > disk detection phase is executed?
~ # parted_devices Floating point exception ~ # > What is the output of 'find /dev/discs/' > > What is the output of 'fdisk -l'? I don't have an easy way to copy this output right now (network-console seems unusable outside of the daily builds due to #288053 AFAICT?), but /dev/discs contains two disks: one for the RAID array (with all its partitions), and one for the CD-ROM (no disc, so no partitions). fdisk -l displays the RAID SCSI device and all of its partitions. john -- John Morrissey _o /\ ---- __o [EMAIL PROTECTED] _-< \_ / \ ---- < \, www.horde.net/ __(_)/_(_)________/ \_______(_) /_(_)__
