On Wednesday 09 May 2007 22:14, John Morrissey wrote: > > It looks like the utility 'parted_devices' is not returning any > > output. What do you get if you run that command on VT2 after the > > first time the disk detection phase is executed? > > ~ # parted_devices > Floating point exception
OK. That at least narrows down the problem and explains the three times that error was listed in your log. Note that parted_devices works perfectly if I run it in an install using newly built netboot image in VMWare (i386). I also see that your image is not all that recent as it still uses a 2.6.18 kernel while we switched to 2.6 20 on April 24. > I don't have an easy way to copy this output right now (network-console > seems unusable outside of the daily builds due to #288053 AFAICT?) No, that has never made it impossible to use network-console. You just have to select its menu item manually. But you can also use scp (after installing the open-ssh-client component) or save the output to /var/log/ and use the "save debug logs" option, or even use 'nc' (netcat), or use a USB stick, or ... We have loads of ways to get stuff out of and into the installer :-) We're just fixing an issue that has made it impossible to create new daily builds. I suggest you try again in a day or three using a daily built image and file a full installation report if it still does not work then (after checking that the image indeed uses a new D-I image and uses 2.6.20). Cheers, FJP
pgp1b49sxMsJF.pgp
Description: PGP signature
