Package: installation-reports Boot method: <How did you boot the installer? CD? floppy? network?> CD
Image version: <Full URL to image you downloaded is best> 3.1r5 DVD from www.lankum.com.au Date: <Date and time of the install> 11 April 2007 Machine: Aaeon AEC-6900 - http://www.aaeon.com/PD_Products_Detail_399AA43D6D854470B6_7E3AB0434DD24B939 C_982B06A19E174F62B9_TW_utf-8.html Processor: Celeron mobile Memory: 512MB Partitions: <df -Tl will do; the raw partition table is preferred> Filesystem Type 1K-blocks Used Available Use% Mounted on /dev/hda1 ext3 6728280 248456 6138044 4% / /dev/hda6 ext3 30368396 32860 28792896 1% /home /dev/scd0 iso9660 6728280 248456 6138044 4% /media/cdrom0 Output of lspci -nn and lspci -vnn: 0000:00:00.0 0600: 1106:0605 0000:00:01.0 0604: 1106:8605 0000:00:07.0 0601: 1106:0686 (rev 40) 0000:00:07.1 0101: 1106:0571 (rev 06) 0000:00:07.2 0c03: 1106:3038 (rev 1a) 0000:00:07.3 0c03: 1106:3038 (rev 1a) 0000:00:07.4 0680: 1106:3057 (rev 40) 0000:00:07.5 0401: 1106:3058 (rev 50) 0000:00:0d.0 0607: 104c:ac51 0000:00:0d.1 0607: 104c:ac51 0000:00:0e.0 0200: 10ec:8139 (rev 10) 0000:00:0f.0 0200: 10ec:8139 (rev 10) 0000:00:11.0 0280: e159:0001 0000:01:00.0 0300: 5333:8d01 (rev 02) 0000:00:00.0 0600: 1106:0605 Flags: bus master, medium devsel, latency 0 Memory at e8000000 (32-bit, prefetchable) [size=64M] Capabilities: [a0] AGP version 2.0 Capabilities: [c0] Power Management version 2 0000:00:01.0 0604: 1106:8605 Flags: bus master, 66MHz, medium devsel, latency 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 Memory behind bridge: ec000000-ec0fffff Prefetchable memory behind bridge: e0000000-e7ffffff Capabilities: [80] Power Management version 2 0000:00:07.0 0601: 1106:0686 (rev 40) Subsystem: 1106:0000 Flags: bus master, stepping, medium devsel, latency 0 Capabilities: [c0] Power Management version 2 0000:00:07.1 0101: 1106:0571 (rev 06) (prog-if 8a [Master SecP PriP]) Subsystem: 1106:0571 Flags: bus master, medium devsel, latency 32 I/O ports at d000 [size=16] Capabilities: [c0] Power Management version 2 0000:00:07.2 0c03: 1106:3038 (rev 1a) Subsystem: 0925:1234 Flags: bus master, medium devsel, latency 32, IRQ 9 I/O ports at d100 [size=32] Capabilities: [80] Power Management version 2 0000:00:07.3 0c03: 1106:3038 (rev 1a) Subsystem: 0925:1234 Flags: bus master, medium devsel, latency 32, IRQ 9 I/O ports at d200 [size=32] Capabilities: [80] Power Management version 2 0000:00:07.4 0680: 1106:3057 (rev 40) Subsystem: 1106:3057 Flags: medium devsel Capabilities: [68] Power Management version 2 0000:00:07.5 0401: 1106:3058 (rev 50) Subsystem: 1106:3058 Flags: medium devsel, IRQ 9 I/O ports at d300 [size=256] I/O ports at d400 [size=4] I/O ports at d500 [size=4] Capabilities: [c0] Power Management version 2 0000:00:0d.0 0607: 104c:ac51 Subsystem: 3412:7856 Flags: bus master, medium devsel, latency 168, IRQ 5 Memory at ec100000 (32-bit, non-prefetchable) [size=4K] Bus: primary=00, secondary=02, subordinate=05, sec-latency=176 Memory window 0: ec101000-ec102000 (prefetchable) Memory window 1: ec103000-ec104000 I/O window 0: 0000d600-0000d703 I/O window 1: 0000d800-0000d903 16-bit legacy interface ports at 0001 0000:00:0d.1 0607: 104c:ac51 Subsystem: 3412:7856 Flags: bus master, medium devsel, latency 168, IRQ 5 Memory at ec105000 (32-bit, non-prefetchable) [size=4K] Bus: primary=00, secondary=06, subordinate=09, sec-latency=176 Memory window 0: ec106000-ec107000 (prefetchable) Memory window 1: ec108000-ec109000 I/O window 0: 0000da00-0000db03 I/O window 1: 0000dc00-0000dd03 16-bit legacy interface ports at 0001 0000:00:0e.0 0200: 10ec:8139 (rev 10) Subsystem: 10ec:8139 Flags: bus master, medium devsel, latency 32, IRQ 5 I/O ports at de00 [size=256] Memory at ec10a000 (32-bit, non-prefetchable) [size=256] Capabilities: [50] Power Management version 2 0000:00:0f.0 0200: 10ec:8139 (rev 10) Subsystem: 10ec:8139 Flags: bus master, medium devsel, latency 32, IRQ 9 I/O ports at df00 [size=256] Memory at ec10b000 (32-bit, non-prefetchable) [size=256] Capabilities: [50] Power Management version 2 0000:00:11.0 0280: e159:0001 Subsystem: 78ff:0001 Flags: bus master, medium devsel, latency 32, IRQ 5 I/O ports at e000 [size=256] Memory at ec10c000 (32-bit, non-prefetchable) [size=4K] Capabilities: [40] Power Management version 2 0000:01:00.0 0300: 5333:8d01 (rev 02) Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 5 Memory at ec000000 (32-bit, non-prefetchable) [size=512K] Memory at e0000000 (32-bit, prefetchable) [size=128M] Capabilities: [dc] Power Management version 2 Capabilities: [80] AGP version 2.0 Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot: [ o] Detect network card: [ o] Configure network: [ o] Detect CD: [ o] Load installer modules: [ o] Detect hard drives: [ o] Partition hard drives: [ o] Install base system: [ o] Clock/timezone setup: [ ] User/password setup: [ ] Install tasks: [ ] Install boot loader: [ E] Overall install: [ ] Comments/Problems: Fails to boot - selects incorrect kernel (k7-smp instead of Celeron etc.) Workaround is to boot back in and using a shell and chroot install a 686 kernel. Everything else is OK Appears to be simlar to the problem described here: http://www.debianhelp.org/node/4831 Final GRUB entry: title Debian GNU/Linux, kernel 2.6.8-3-k7-smp root (hd0,0) kernel /boot/vmlinuz-2.6.8-3-k7-smp root=/dev/hda1 ro initrd /boot/initrd.img-2.6.8-3-k7-smp savedefault Boot Extract from var installer log directory - syslog: Apr 11 16:26:34 main-menu[537]: DEBUG: virtual package created-fstab Apr 11 16:26:36 base-installer: info: Execution hook before debootstrap Apr 11 16:26:36 base-installer: info: Running /usr/lib/base-installer.d/40netcfg Apr 11 16:30:13 base-installer: info: Found kernels 'kernel-image-2.6.8-3-k7-smp,kernel-image-2.6.8-3-k7,kernel-image-2.6.8-3-68 6-smp,kernel-image-2.6.8-3-686,kernel-image-2.6.8-3-386,kernel-image-2.6.8-1 2-em64t-p4-smp,kernel-image-2.6.8-12-em64t-p4,kernel-image-2.6.8-12-amd64-k8 -smp,kernel-image-2.6.8-12-amd64-k8,kernel-image-2.6.8-12-amd64-generic,kern el-image-2.4.27-speakup,kernel-image-2.4.27-3-k7-smp,kernel-image-2.4.27-3-k 7,kernel-image-2.4.27-3-k6,kernel-image-2.4.27-3-686-smp,kernel-image-2.4.27 -3-686,kernel-image-2.4.27-3-586tsc,kernel-image-2.4.27-3-386' Apr 11 16:30:13 base-installer: info: Using kernel 'kernel-image-2.6.8-3-k7-smp' Dump of /proc/cpuinfo: processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 11 model name : Mobile Intel(R) Celeron(TM) CPU 650MHz stepping : 4 cpu MHz : 653.162 cache size : 256 KB fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 2 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 mmx fxsr sse bogomips : 1286.14 I would have expected a 686 kernel to be chosen? --Andrew Andrew McDonnell Senior Software Engineer Daronmont Technologies Pty. Ltd. Ph. +61 8 83599642 Mob. 0412060324 -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
