Package: installation-reports Boot method: CD Image version: http://mirrors.telianet.dk/pub/mirrors/cdimage.debian.org/3.1_r3/i386/iso-cd/
Date: 05. november 2006 Machine: Shuttle SB36 Processor: Intel 4, 3.4Ghz Memory: 2 GB memory (Dual) Partitions: 2*320 GB (Raid 1), Output of lspci and lspci -n: ? Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot worked: [O] Configure network HW: [E], Could not find my network card Config network: [ ] Detect CD: [O] Load installer modules: [O] Detect hard drives: [E] Partition hard drives: [E] Create file systems: [ ] Mount partitions: [E] Install base system: [ ] Install boot loader: [ ] Reboot: [ ] Comments/Problems: Well my problem is that the system do not support Raid on the installation cd, I have drivers for the raid, but do not know how to install the driver (raid driver) at boot time. So my system fails every time it looks for the disks when it wants to install or look at the partition. Hardware: XPC SD36G5: Chipset: Intel 945G (lakeport-g) +Ich7 DH cd: plextor Bios: Award V6.0PG, 4 mb flash Socket: 775 (T) Proc: Pentium D (Dual core, presler) 945, 3,4Ghz, 800mhz FSB Grafik: Intel Graphics media accellerator 950 (max 224 mb shared), 333mhz, DX8,9 support, DVMT 3 Memory: Kingston DDR2-667, 2*1024Mb, Cas 5 (Dual) Audio: 7.1 ch HD, Realtek ALC882 Power supply: Silent X 250 w. Networkcard: Intel 82573L (Gigabit), RJ45 Firewire: IEEE 1394, VIA VT6307, 400mb sec, 1 front, 1 bag Harddiske: WD Caviar RE 3200YS, 320GB, Sata ll (2 stk), Raid 1, 3gb sec Tv kort: Hauppauge WinTV PVR 500MCE kit (PCI 32 bit) [EMAIL PROTECTED] This transmission is intended solely for the person or entity to whom it is addressed. It may contain privileged and confidential information. If you are not the intended recipient, please be notified that any dissemination, distribution or copying is strictly prohibited. If you have received this transmission by mistake, please let us know and then delete it from your system. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
