Your message dated Wed, 02 Aug 2006 23:06:33 +0200
with message-id <[EMAIL PROTECTED]>
and subject line Bug#381202: Installation report
has caused the attached Bug report to be marked as done.
This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.
(NB: If you are a system administrator and have no idea what I am
talking about this indicates a serious mail system misconfiguration
somewhere. Please contact me immediately.)
Debian bug tracking system administrator
(administrator, Debian Bugs database)
--- Begin Message ---
Package: installation-reports
Boot method: CD debian-testing-i386-netinst.iso
Image version: 2 August 2006
http://cdimage.debian.org/cdimage/daily-builds/daily/arch-latest/i386/iso-cd/debian-testing-i386-netinst.iso
Date: 2 August 2006 Time: 03:00 PM - GTM +1
Machine: Assembled PC: Mother Board ASUS P5GPL - X SE, , Hd SATA II 250
GB,
Video card ASUS PCI-EX 1300 256 Mb, Integrated Soundcard
Processor: Pentiun IV 3.4 GHZ
Memory: RAM DDR 1000 Mb PC 3200
Partitions:
Filesystem Typeblocchi di 1K Usati Disponib. Uso% Montato su
/dev/sda2 ext3 6728312 3149432 3237100 50% /
tmpfs tmpfs 517920 0 517920 0% /dev/shm
/dev/sda6 ext3 41967332 137676 39697836 1% /home
tmpfs tmpfs 10240 104 10136 2% /dev
Output of lspci and lspci -n:
[EMAIL PROTECTED]:~$ lspci
00:00.0 Host bridge: Intel Corporation 915G/P/GV/GL/PL/910GL Express Memory
Controller Hub (rev 0e)
00:01.0 PCI bridge: Intel Corporation 915G/P/GV/GL/PL/910GL Express PCI Express
Root Port (rev 0e)
00:1b.0 Audio device: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family)
High Definition Audio Controller (rev 04)
00:1c.0 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI
Express Port 1 (rev 04)
00:1d.0 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family)
USB UHCI #1 (rev 04)
00:1d.1 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family)
USB UHCI #2 (rev 04)
00:1d.2 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family)
USB UHCI #3 (rev 04)
00:1d.3 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family)
USB UHCI #4 (rev 04)
00:1d.7 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family)
USB2 EHCI Controller (rev 04)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev d4)
00:1f.0 ISA bridge: Intel Corporation 82801FB/FR (ICH6/ICH6R) LPC Interface
Bridge (rev 04)
00:1f.1 IDE interface: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family)
IDE Controller (rev 04)
00:1f.2 IDE interface: Intel Corporation 82801FB/FW (ICH6/ICH6W) SATA
Controller (rev 04)
00:1f.3 SMBus: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus
Controller (rev 04)
01:03.0 Ethernet controller: Marvell Technology Group Ltd. 88E8001 Gigabit
Ethernet Controller (rev 13)
03:00.0 VGA compatible controller: ATI Technologies Inc RV515 [Radeon X1300]
03:00.1 Display controller: ATI Technologies Inc RV515 [Radeon X1300]
(Secondary)
[EMAIL PROTECTED]:~$ lspci -n
00:00.0 0600: 8086:2580 (rev 0e)
00:01.0 0604: 8086:2581 (rev 0e)
00:1b.0 0403: 8086:2668 (rev 04)
00:1c.0 0604: 8086:2660 (rev 04)
00:1d.0 0c03: 8086:2658 (rev 04)
00:1d.1 0c03: 8086:2659 (rev 04)
00:1d.2 0c03: 8086:265a (rev 04)
00:1d.3 0c03: 8086:265b (rev 04)
00:1d.7 0c03: 8086:265c (rev 04)
00:1e.0 0604: 8086:244e (rev d4)
00:1f.0 0601: 8086:2640 (rev 04)
00:1f.1 0101: 8086:266f (rev 04)
00:1f.2 0101: 8086:2651 (rev 04)
00:1f.3 0c05: 8086:266a (rev 04)
01:03.0 0200: 11ab:4320 (rev 13)
03:00.0 0300: 1002:7146
03:00.1 0380: 1002:7166
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot worked: [O]
Configure network HW: [O]
Config network: [O]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Create file systems: [O]
Mount partitions: [O]
Install base system: [O]
Install boot loader: [O]
Reboot: [O]
Comments/Problems:
I boot with "installgui libata.atapi_enabled=1"; the installation went
OK! The GUI installer is fantastic!!!
Good Job, thank for all you work!
Moreno Baruffini
--- End Message ---
--- Begin Message ---
On Wednesday 02 August 2006 21:27, Moreno Baruffini wrote:
> Comments/Problems:
> I boot with "installgui libata.atapi_enabled=1"; the installation went
> OK! The GUI installer is fantastic!!!
>
> Good Job, thank for all you work!
I'm curious if you did the installation in Italian or English?
Thanks very much for submitting your report and for your compliments!
As the installation was successful, I'm closing the report.
Good luck with your new system.
Cheers,
FJP
--- End Message ---
