Package: installation-reports
Boot method: CD debian-testing-i386-netinst.iso
Image version: 2 August 2006
http://cdimage.debian.org/cdimage/daily-builds/daily/arch-latest/i386/iso-cd/debian-testing-i386-netinst.iso
Date: 2 August 2006 Time: 03:00 PM - GTM +1
Machine: Assembled PC: Mother Board ASUS P5GPL - X SE, , Hd SATA II 250
GB,
Video card ASUS PCI-EX 1300 256 Mb, Integrated Soundcard
Processor: Pentiun IV 3.4 GHZ
Memory: RAM DDR 1000 Mb PC 3200
Partitions:
Filesystem Typeblocchi di 1K Usati Disponib. Uso% Montato su
/dev/sda2 ext3 6728312 3149432 3237100 50% /
tmpfs tmpfs 517920 0 517920 0% /dev/shm
/dev/sda6 ext3 41967332 137676 39697836 1% /home
tmpfs tmpfs 10240 104 10136 2% /dev
Output of lspci and lspci -n:
[EMAIL PROTECTED]:~$ lspci
00:00.0 Host bridge: Intel Corporation 915G/P/GV/GL/PL/910GL Express Memory
Controller Hub (rev 0e)
00:01.0 PCI bridge: Intel Corporation 915G/P/GV/GL/PL/910GL Express PCI Express
Root Port (rev 0e)
00:1b.0 Audio device: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family)
High Definition Audio Controller (rev 04)
00:1c.0 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI
Express Port 1 (rev 04)
00:1d.0 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family)
USB UHCI #1 (rev 04)
00:1d.1 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family)
USB UHCI #2 (rev 04)
00:1d.2 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family)
USB UHCI #3 (rev 04)
00:1d.3 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family)
USB UHCI #4 (rev 04)
00:1d.7 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family)
USB2 EHCI Controller (rev 04)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev d4)
00:1f.0 ISA bridge: Intel Corporation 82801FB/FR (ICH6/ICH6R) LPC Interface
Bridge (rev 04)
00:1f.1 IDE interface: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family)
IDE Controller (rev 04)
00:1f.2 IDE interface: Intel Corporation 82801FB/FW (ICH6/ICH6W) SATA
Controller (rev 04)
00:1f.3 SMBus: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus
Controller (rev 04)
01:03.0 Ethernet controller: Marvell Technology Group Ltd. 88E8001 Gigabit
Ethernet Controller (rev 13)
03:00.0 VGA compatible controller: ATI Technologies Inc RV515 [Radeon X1300]
03:00.1 Display controller: ATI Technologies Inc RV515 [Radeon X1300]
(Secondary)
[EMAIL PROTECTED]:~$ lspci -n
00:00.0 0600: 8086:2580 (rev 0e)
00:01.0 0604: 8086:2581 (rev 0e)
00:1b.0 0403: 8086:2668 (rev 04)
00:1c.0 0604: 8086:2660 (rev 04)
00:1d.0 0c03: 8086:2658 (rev 04)
00:1d.1 0c03: 8086:2659 (rev 04)
00:1d.2 0c03: 8086:265a (rev 04)
00:1d.3 0c03: 8086:265b (rev 04)
00:1d.7 0c03: 8086:265c (rev 04)
00:1e.0 0604: 8086:244e (rev d4)
00:1f.0 0601: 8086:2640 (rev 04)
00:1f.1 0101: 8086:266f (rev 04)
00:1f.2 0101: 8086:2651 (rev 04)
00:1f.3 0c05: 8086:266a (rev 04)
01:03.0 0200: 11ab:4320 (rev 13)
03:00.0 0300: 1002:7146
03:00.1 0380: 1002:7166
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot worked: [O]
Configure network HW: [O]
Config network: [O]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Create file systems: [O]
Mount partitions: [O]
Install base system: [O]
Install boot loader: [O]
Reboot: [O]
Comments/Problems:
I boot with "installgui libata.atapi_enabled=1"; the installation went
OK! The GUI installer is fantastic!!!
Good Job, thank for all you work!
Moreno Baruffini
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
