Package: installation-reports Boot method: CD Image version: http://cdimage.debian.org/cdimage/daily-builds/daily/arch-latest/i386/iso-cd/debian-testing-i386-businesscard.iso EtchBeta2 downloaded on 2006-03-17 Date: 2006-03-20 17:30
Machine: ACER TravelMate 8104 WLMi Processor: processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 13 model name : Intel(R) Pentium(R) M processor 2.00GHz stepping : 8 cpu MHz : 1995.620 cache size : 2048 KB fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 2 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat clflush dts acpi mmx fxsr sse sse2 ss tm pbe nx est tm2 bogomips : 3940.35 Memory: 2Go Partitions: <df -Tl will do; the raw partition table is preferred> Output of lspci and lspci -n: [EMAIL PROTECTED] lspci 0000:00:00.0 Host bridge: Intel Corporation Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller (rev 04) 0000:00:01.0 PCI bridge: Intel Corporation Mobile 915GM/PM Express PCI Express Root Port (rev 04) 0000:00:1b.0 Audio device: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) High Definition Audio Controller (rev 04) 0000:00:1c.0 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1 (rev 04) 0000:00:1c.1 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 2 (rev 04) 0000:00:1c.2 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 3 (rev 04) 0000:00:1d.0 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 (rev 04) 0000:00:1d.1 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 (rev 04) 0000:00:1d.2 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 (rev 04) 0000:00:1d.3 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 (rev 04) 0000:00:1d.7 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller (rev 04) 0000:00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev d4) 0000:00:1f.0 ISA bridge: Intel Corporation 82801FBM (ICH6M) LPC Interface Bridge (rev 04) 0000:00:1f.2 IDE interface: Intel Corporation 82801FBM (ICH6M) SATA Controller (rev 04) 0000:00:1f.3 SMBus: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller (rev 04) 0000:01:00.0 VGA compatible controller: ATI Technologies Inc Radeon Mobility X700 (PCIE) 0000:06:03.0 Network controller: Intel Corporation PRO/Wireless 2915ABG MiniPCI Adapter (rev 05) 0000:06:06.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5788 Gigabit Ethernet (rev 03) 0000:06:07.0 FireWire (IEEE 1394): Texas Instruments TSB43AB21 IEEE- 1394a-2000 Controller (PHY/Link) 0000:06:09.0 CardBus bridge: O2 Micro, Inc. OZ711M3/MC3 4-in-1 MemoryCardBus Controller 0000:06:09.1 CardBus bridge: O2 Micro, Inc. OZ711M3/MC3 4-in-1 MemoryCardBus Controller 0000:06:09.2 System peripheral: O2 Micro, Inc. OZ711Mx 4-in-1 MemoryCardBus Accelerator 0000:06:09.3 CardBus bridge: O2 Micro, Inc. OZ711M3/MC3 4-in-1 MemoryCardBus Controller [EMAIL PROTECTED] lspci -n 0000:00:00.0 0600: 8086:2590 (rev 04) 0000:00:01.0 0604: 8086:2591 (rev 04) 0000:00:1b.0 0403: 8086:2668 (rev 04) 0000:00:1c.0 0604: 8086:2660 (rev 04) 0000:00:1c.1 0604: 8086:2662 (rev 04) 0000:00:1c.2 0604: 8086:2664 (rev 04) 0000:00:1d.0 0c03: 8086:2658 (rev 04) 0000:00:1d.1 0c03: 8086:2659 (rev 04) 0000:00:1d.2 0c03: 8086:265a (rev 04) 0000:00:1d.3 0c03: 8086:265b (rev 04) 0000:00:1d.7 0c03: 8086:265c (rev 04) 0000:00:1e.0 0604: 8086:2448 (rev d4) 0000:00:1f.0 0601: 8086:2641 (rev 04) 0000:00:1f.2 0101: 8086:2653 (rev 04) 0000:00:1f.3 0c05: 8086:266a (rev 04) 0000:01:00.0 0300: 1002:5653 0000:06:03.0 0280: 8086:4223 (rev 05) 0000:06:06.0 0200: 14e4:169c (rev 03) 0000:06:07.0 0c00: 104c:8026 0000:06:09.0 0607: 1217:7223 0000:06:09.1 0607: 1217:7223 0000:06:09.2 0880: 1217:7110 0000:06:09.3 0607: 1217:7223 Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot worked: [O] Configure network HW: [ ] Config network: [ ] Detect CD: [ E] Load installer modules: [ ] Detect hard drives: [ ] Partition hard drives: [ ] Create file systems: [ ] Mount partitions: [ ] Install base system: [ ] Install boot loader: [ ] Reboot: [ ] Comments/Problems: Boot with "noapic nolapic" option. Does not detect and mount de CD. -- Cordialement. Louis-Maurice De Sousa -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
