Package: installation-reports Boot method: CD Image version: http://cdimage.debian.org/cdimage/daily-builds/daily/arch-latest/i386/iso-cd/debian-testing-i386-businesscard.iso EtchBeta2 downloaded on 2006-03-17 Date: 2006-03-20 17:30
Machine: ACER TravelMate 8104 WLMi Processor: processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 13 model name : Intel(R) Pentium(R) M processor 2.00GHz stepping : 8 cpu MHz : 1995.620 cache size : 2048 KB fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 2 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat clflush dts acpi mmx fxsr sse sse2 ss tm pbe nx est tm2 bogomips : 3940.35 Memory: 2Go Partitions: <df -Tl will do; the raw partition table is preferred> Output of lspci and lspci -n: [EMAIL PROTECTED] lspci 0000:00:00.0 Host bridge: Intel Corporation Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller (rev 04) 0000:00:01.0 PCI bridge: Intel Corporation Mobile 915GM/PM Express PCI Express Root Port (rev 04) 0000:00:1b.0 Audio device: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) High Definition Audio Controller (rev 04) 0000:00:1c.0 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1 (rev 04) 0000:00:1c.1 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 2 (rev 04) 0000:00:1c.2 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 3 (rev 04) 0000:00:1d.0 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 (rev 04) 0000:00:1d.1 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 (rev 04) 0000:00:1d.2 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 (rev 04) 0000:00:1d.3 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 (rev 04) 0000:00:1d.7 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller (rev 04) 0000:00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev d4) 0000:00:1f.0 ISA bridge: Intel Corporation 82801FBM (ICH6M) LPC Interface Bridge (rev 04) 0000:00:1f.2 IDE interface: Intel Corporation 82801FBM (ICH6M) SATA Controller (rev 04) 0000:00:1f.3 SMBus: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller (rev 04) 0000:01:00.0 VGA compatible controller: ATI Technologies Inc Radeon Mobility X700 (PCIE) 0000:06:03.0 Network controller: Intel Corporation PRO/Wireless 2915ABG MiniPCI Adapter (rev 05) 0000:06:06.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5788 Gigabit Ethernet (rev 03) 0000:06:07.0 FireWire (IEEE 1394): Texas Instruments TSB43AB21 IEEE- 1394a-2000 Controller (PHY/Link) 0000:06:09.0 CardBus bridge: O2 Micro, Inc. OZ711M3/MC3 4-in-1 MemoryCardBus Controller 0000:06:09.1 CardBus bridge: O2 Micro, Inc. OZ711M3/MC3 4-in-1 MemoryCardBus Controller 0000:06:09.2 System peripheral: O2 Micro, Inc. OZ711Mx 4-in-1 MemoryCardBus Accelerator 0000:06:09.3 CardBus bridge: O2 Micro, Inc. OZ711M3/MC3 4-in-1 MemoryCardBus Controller [EMAIL PROTECTED] lspci -n 0000:00:00.0 0600: 8086:2590 (rev 04) 0000:00:01.0 0604: 8086:2591 (rev 04) 0000:00:1b.0 0403: 8086:2668 (rev 04) 0000:00:1c.0 0604: 8086:2660 (rev 04) 0000:00:1c.1 0604: 8086:2662 (rev 04) 0000:00:1c.2 0604: 8086:2664 (rev 04) 0000:00:1d.0 0c03: 8086:2658 (rev 04) 0000:00:1d.1 0c03: 8086:2659 (rev 04) 0000:00:1d.2 0c03: 8086:265a (rev 04) 0000:00:1d.3 0c03: 8086:265b (rev 04) 0000:00:1d.7 0c03: 8086:265c (rev 04) 0000:00:1e.0 0604: 8086:2448 (rev d4) 0000:00:1f.0 0601: 8086:2641 (rev 04) 0000:00:1f.2 0101: 8086:2653 (rev 04) 0000:00:1f.3 0c05: 8086:266a (rev 04) 0000:01:00.0 0300: 1002:5653 0000:06:03.0 0280: 8086:4223 (rev 05) 0000:06:06.0 0200: 14e4:169c (rev 03) 0000:06:07.0 0c00: 104c:8026 0000:06:09.0 0607: 1217:7223 0000:06:09.1 0607: 1217:7223 0000:06:09.2 0880: 1217:7110 0000:06:09.3 0607: 1217:7223 Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot worked: [O] Configure network HW: [O ] Config network: [ O] Detect CD: [ O] Load installer modules: [O ] Detect hard drives: [O ] Partition hard drives: [ O] Create file systems: [O ] Mount partitions: [O ] Install base system: [ E] Install boot loader: [O ] Reboot: [ O] Comments/Problems: Boot with "noapic nolapic BOOT_DEBUG=3" options echo options libata atapi_enabled=1 >> /etc/modprobe.conf to make the CD to be recognized (http://wiki.debian.org/DebianInstaller/SataAtapiHowto) . But, as writen on the Wiki, "why this page exists" :-) We have a local mirror of Debian repository. I could not use it because the script looks for unstable and our repository is named sid. I previously had the same problem with testing and etch. The wget command on apt freezed. Killing it made the installation continu. ati and radeon devices do not work. Xorg worked with vesa device and a 1280X1024 display instead of 1680X1050. The keyboard layout "fr-latin9" does not work. Wrting just "fr" fixed it. Network interfaces do not go up at boot time nor with a /etc/init.d/networking restart A ifup eth0 is necessary. Thanks for your help. I think my Debian will work fine now. :-) . -- Cordialement. Louis-Maurice De Sousa -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
