Package: installation-reports INSTALL REPORT
Debian-installer-version: debian-31r1-i386-binary-1, Feb 2006, http downloaded (mirror in Germany (?)) uname -a: Linux kokoro 2.6.8-2-686 #1 Tue Aug 16 13:22:48 UTC 2005 i686 GNU/Linux Date: 04 February 2006 Method: How did you install? Base install with the first CD with only basic packages chosen by default.The laptop was cannected to an ADSL router with an RJ45 cable andthe network was detected without any trouble. No proxy. Then I proceed further choosing the necessary packages and downloading them from the network. My sources.list: #deb file:///cdrom/ sarge main deb http://ftp.de.debian.org/debian/ stable main contrib non-free deb-src http://ftp.de.debian.org/debian/ stable main contrib non-free deb http://security.debian.org/ stable/updates main contrib non-free Machine: Laptop Samsung X20 Processor: Intel(R) Pentium(R) M processor 1.60GHz Memory: 512Mb Root Device: IDE interface: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) IDE Controller (rev 03) (/dev/hda5) Root Size/partition table: Device Boot Start End Blocks Id System /dev/hda1 * 1 2054 16498723+ 7 HPFS/NTFS /dev/hda2 2055 5411 26965102+ 5 Extended /dev/hda5 2055 3270 9767488+ 83 Linux /dev/hda6 3271 3465 1566306 83 Linux /dev/hda7 3466 5289 14651248+ 83 Linux /dev/hda8 5290 5411 979933+ 82 Linux swap / Solaris Output of lspci and lspci -n: lspci: 0000:00:00.0 Host bridge: Intel Corp. Mobile Memory Controller Hub (rev 03) 0000:00:02.0 VGA compatible controller: Intel Corp. Mobile Graphics Controller ( rev 03) 0000:00:02.1 Display controller: Intel Corp. Mobile Graphics Controller (rev 03) 0000:00:1c.0 PCI bridge: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Exp ress Port 1 (rev 03) 0000:00:1d.0 USB Controller: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 (rev 03) 0000:00:1d.1 USB Controller: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 (rev 03) 0000:00:1d.2 USB Controller: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 (rev 03) 0000:00:1d.3 USB Controller: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 (rev 03) 0000:00:1d.7 USB Controller: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB 2 EHCI Controller (rev 03) 0000:00:1e.0 PCI bridge: Intel Corp. 82801 PCI Bridge (rev d3) 0000:00:1e.2 Multimedia audio controller: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH 6 Family) AC'97 Audio Controller (rev 03) 0000:00:1e.3 Modem: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Modem Controller (rev 03) 0000:00:1f.0 ISA bridge: Intel Corp. 82801FBM (ICH6M) LPC Interface Bridge (rev 03) 0000:00:1f.1 IDE interface: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) IDE Controller (rev 03) 0000:00:1f.3 SMBus: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Contro ller (rev 03) 0000:06:05.0 Ethernet controller: Broadcom Corporation BCM4401-B0 100Base-TX (re v 02) 0000:06:07.0 Network controller: Intel Corp.: Unknown device 4223 (rev 05) 0000:06:09.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev b3) 0000:06:09.1 FireWire (IEEE 1394): Ricoh Co Ltd R5C552 IEEE 1394 Controller (rev 08) 0000:06:09.2 0805: Ricoh Co Ltd: Unknown device 0822 (rev 17) 0000:06:09.3 System peripheral: Ricoh Co Ltd: Unknown device 0592 (rev 08) lspci -n 0000:00:00.0 0600: 8086:2590 (rev 03) 0000:00:02.0 0300: 8086:2592 (rev 03) 0000:00:02.1 0380: 8086:2792 (rev 03) 0000:00:1c.0 0604: 8086:2660 (rev 03) 0000:00:1d.0 0c03: 8086:2658 (rev 03) 0000:00:1d.1 0c03: 8086:2659 (rev 03) 0000:00:1d.2 0c03: 8086:265a (rev 03) 0000:00:1d.3 0c03: 8086:265b (rev 03) 0000:00:1d.7 0c03: 8086:265c (rev 03) 0000:00:1e.0 0604: 8086:2448 (rev d3) 0000:00:1e.2 0401: 8086:266e (rev 03) 0000:00:1e.3 0703: 8086:266d (rev 03) 0000:00:1f.0 0601: 8086:2641 (rev 03) 0000:00:1f.1 0101: 8086:266f (rev 03) 0000:00:1f.3 0c05: 8086:266a (rev 03) 0000:06:05.0 0200: 14e4:170c (rev 02) 0000:06:07.0 0280: 8086:4223 (rev 05) 0000:06:09.0 0607: 1180:0476 (rev b3) 0000:06:09.1 0c00: 1180:0552 (rev 08) 0000:06:09.2 0805: 1180:0822 (rev 17) 0000:06:09.3 0880: 1180:0592 (rev 08) Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot worked: [O] Configure network HW: [O] Config network: [O] Detect CD: [O] Load installer modules: [O] Detect hard drives: [O] Partition hard drives: [O] Create file systems: [O] Mount partitions: [O] Install base system: [O] Install boot loader: [O] Reboot: [O] Comments/Problems: Everything went even more smoothly than expected. Some trouble with X11 -not much skilled editing XF86Config-4- and couldn't get the right colour depth. Solved using the X11 configuration file from Knoppix.
