Package: installation-reports Severity: normal
an-installer-version:http://debian-amd64.alioth.debian.org/debian-installer/2004-12-26/netboot/netboot.tar.gz uname -a: Linux aphrodite 2.6.8-9-amd64-k8 #1 Sat Dec 4 23:16:23 CET 2004 x86_64 GNU/Linux Date: 2004-12-28 Method: network install, local intranet-tftp netboot.tar.gz, 2004-12-26 Machine: MSI K8N Neo2 Platinum (NVIDIA nForce3 chipset) Processor: AMD Athlon(tm) 64 Processor 3500+, 2210 MHz Memory: 1023788 kB RAM (2x Corsair CMX512-3200C2) Root Device: IDE /dev/hda1 (Model=WDC WD800JB-00ETA0, FwRev=77.07W77, SerialNo=WD-WCAHL5101468) Root Size/partition table: /dev/hda3 78005608 1339788 76665820 2% / tmpfs 511892 0 511892 0% /dev/shm /dev/hda1 90297 10713 74767 13% /boot /dev 78005608 1339788 76665820 2% /.dev none 5120 716 4404 14% /dev Output of lspci and lspci -n: lspci 0000:00:00.0 Host bridge: nVidia Corporation: Unknown device 00e1 (rev a1) 0000:00:01.0 ISA bridge: nVidia Corporation: Unknown device 00e0 (rev a2) 0000:00:01.1 SMBus: nVidia Corporation: Unknown device 00e4 (rev a1) 0000:00:02.0 USB Controller: nVidia Corporation: Unknown device 00e7 (rev a1) 0000:00:02.1 USB Controller: nVidia Corporation: Unknown device 00e7 (rev a1) 0000:00:02.2 USB Controller: nVidia Corporation: Unknown device 00e8 (rev a2) 0000:00:06.0 Multimedia audio controller: nVidia Corporation: Unknown device 00ea (rev a1) 0000:00:08.0 IDE interface: nVidia Corporation: Unknown device 00e5 (rev a2) 0000:00:0b.0 PCI bridge: nVidia Corporation: Unknown device 00e2 (rev a2) 0000:00:0e.0 PCI bridge: nVidia Corporation: Unknown device 00ed (rev a2) 0000:00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge 0000:00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge 0000:00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge 0000:00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge 0000:01:00.0 VGA compatible controller: ATI Technologies Inc RV350 AP [Radeon 9600] 0000:01:00.1 Display controller: ATI Technologies Inc RV350 AP [Radeon 9600] (Secondary) 0000:02:0d.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8169 Gigabit Ethernet (rev 10) lspci -n 0000:00:00.0 0600: 10de:00e1 (rev a1) 0000:00:01.0 0601: 10de:00e0 (rev a2) 0000:00:01.1 0c05: 10de:00e4 (rev a1) 0000:00:02.0 0c03: 10de:00e7 (rev a1) 0000:00:02.1 0c03: 10de:00e7 (rev a1) 0000:00:02.2 0c03: 10de:00e8 (rev a2) 0000:00:06.0 0401: 10de:00ea (rev a1) 0000:00:08.0 0101: 10de:00e5 (rev a2) 0000:00:0b.0 0604: 10de:00e2 (rev a2) 0000:00:0e.0 0604: 10de:00ed (rev a2) 0000:00:18.0 0600: 1022:1100 0000:00:18.1 0600: 1022:1101 0000:00:18.2 0600: 1022:1102 0000:00:18.3 0600: 1022:1103 0000:01:00.0 0300: 1002:4150 0000:01:00.1 0380: 1002:4170 0000:02:0d.0 0200: 10ec:8169 (rev 10) Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot worked: [O] Configure network HW: [O] Config network: [O] Detect CD: [O] Load installer modules: [O] Detect hard drives: [O] Partition hard drives: [E] Create file systems: [O] Mount partitions: [O] Install base system: [E] Install boot loader: [E] Reboot: [E] Comments/Problems: - BIOS Version 1.4 (Award), 12/2004 Installation with SATA-devices Samsung SP1213C 120GB 7200U/min 8.9ms 8MB didn't work, - tried SATA1 / SATA2 with Software-RAID - tried SATA1 with single Installation, both extf3 or xfs - all installation interrupted with Segmentation fault - debian-amd64/pure-amd64 interrupted with SATA1-drive in each time (segmentation fault) - sarge-installation interrupted with SATA1-drive in each time - all install setting tried, acpi=force, acpi=off, lacpi=aoff (misc bios settings), nothing help Solution: - sarge netinst-rc2 was okay with single drive SATA1 - debian-amd64/pure-amd64 was okay with IDE-install to /dev/hda1 WD800JB-00ETA0 - support of nv-ata must be buggy with MSI Neo2 Platinum Debian Release: 3.1 Architecture: amd64 (x86_64) Kernel: Linux 2.6.8-9-amd64-k8 Locale: [EMAIL PROTECTED], [EMAIL PROTECTED] (charmap=ISO-8859-15) -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
