On (23/12/04 16:51), Lechevalier Olivier wrote: > Package: installation-reports > > Debian-installer-version: sarge > http://cdimage.debian.org/pub/cdimage-testing/sarge_d-i/i386/rc2/sarge-i > 386-netinst.iso > uname -a: Linux nagios 2.4.27-1-386 #1 Fri Sep 3 06:24:46 UTC 2004 i686 > GNU/Linux > Date: 22/12/2004 > Method: net-inst http proxy > > Machine: Ibm Xseries 305 (model 8673-62X) > Processor: Pentuim IV 2.6Ghz > Memory: 1 Go > Root Device: IDE, ata raid > Root Size/partition table: no partition > Output of lspci and lspci -n: > > 00:00.0 Host bridge: ServerWorks GCNB-LE Host Bridge (rev 32) > 00:00.1 Host bridge: ServerWorks GCNB-LE Host Bridge > 00:03.0 VGA compatible controller: ATI Technologies Inc Rage XL (rev 27) > 00:0f.0 ISA bridge: ServerWorks CSB5 South Bridge (rev 93) > 00:0f.1 IDE interface: ServerWorks CSB5 IDE Controller (rev 93) > 00:0f.2 USB Controller: ServerWorks OSB4/CSB5 OHCI USB Controller (rev > 05) > 00:0f.3 Host bridge: ServerWorks GCLE Host Bridge > 00:10.0 Host bridge: ServerWorks: Unknown device 0101 (rev 05) > 00:10.2 Host bridge: ServerWorks: Unknown device 0101 (rev 05) > 01:02.0 RAID bus controller: CMD Technology Inc PCI0680 (rev 02) > 02:04.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5703 > Gigabit Ethernet (rev 02) > 02:05.0 Ethernet controller: 00:00.0 Class 0600: 1166:0017 (rev 32) > 00:00.1 Class 0600: 1166:0017 > 00:03.0 Class 0300: 1002:4752 (rev 27) > 00:0f.0 Class 0601: 1166:0201 (rev 93) > 00:0f.1 Class 0101: 1166:0212 (rev 93) > 00:0f.2 Class 0c03: 1166:0220 (rev 05) > 00:0f.3 Class 0600: 1166:0225 > 00:10.0 Class 0600: 1166:0101 (rev 05) > 00:10.2 Class 0600: 1166:0101 (rev 05) > 01:02.0 Class 0104: 1095:0680 (rev 02) > 02:04.0 Class 0200: 14e4:16a7 (rev 02) > 02:05.0 Class 0200: 14e4:16a7 (rev 02) > > Base System Installation Checklist: > [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it > > Initial boot worked: [O] > Configure network HW: [O] > Config network: [O] > Detect CD: [O] > Load installer modules: [O] > Detect hard drives: [E] > Partition hard drives: [ ] > Create file systems: [ ] > Mount partitions: [ ] > Install base system: [ ] > Install boot loader: [ ] > Reboot: [ ] > > Comments/Problems: > > There is an ata raid (LSI Megaraid 133) on the motherboard, the sarge > install didn't detect it, I want to use hardware read. If someone can > give me a hint to compile the module, or do make it work .... Try booting the installer with
boot: expert26 Regards Clive -- www.clivemenzies.co.uk ... ...strategies for business -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
