Package: installation-reports
INSTALL REPORT
Debian-installer-version: "Sarge" pre-rc2 from
http://cdimage.debian.org/pub/cdimage-testing/sid_d-i/i386/pre-rc2/sarge-i386-netinst.iso
uname -a: Linux PHIL 2.6.9-1-k7 #1 Tue Nov 16 18:33:58 JST 2004 i686
GNU/Linux (uname -a done on /dev/hda2, it's the same except that on hda4
I haven't yet installed the newer kernel, therefore there is still the
kernel-image-2.6.8.1-1-386 installed)
Date: Mon Nov 22 2004
Method: How did you install? What did you boot off? If network
install, from where? Proxied?
- booted from netinst - CD
internet access via networkcard
Machine: selfmade
Processor: AMD Athlon XP 1700+
Memory: 521MB
Root Device: IDE /dev/hda4 (other debian installation on /dev/hda2;
Windows XP on /dev/hda1
Root Size/partition table: Feel free to paste the full partition
table, with notes on which partitions are mounted where.
Partition Table for /dev/hda
---Starting--- ----Ending---- Start Number of
# Flags Head Sect Cyl ID Head Sect Cyl Sector Sectors
-- ----- ---- ---- ---- ---- ---- ---- ---- ----------- -----------
1 0x80 1 1 0 0x07 254 63 1023 63 81915372 #
Windows XP, NTFS, not mounted
2 0x00 254 63 1023 0x83 254 63 1023 81915435 40965750 #
Debian, ext3, not mounted
3 0x00 254 63 1023 0x05 254 63 1023 122881185 99635130 #
4 0x00 254 63 1023 0x83 254 63 1023 271610955 40965750 #
5 0x00 254 63 1023 0x82 254 63 1023 63 1959867
6 0x00 254 63 1023 0x83 254 63 1023 63 39070017
7 0x00 254 63 1023 0x83 254 63 1023 63 39070017
8 0x00 254 63 1023 0x0C 254 63 1023 63 19534977
Name Flags Part Type
FS Type Size (MB) Desc
----------------------------------------------------------------------------------------------------------------------------------------------------
hda1 Boot Primary
NTFS 41940.71 Windows XP, not mounted
hda2 Primary
Linux ext3 20974.47 Debian Unstable, not mounted
hda5 Logical
Linux swap / Solaris 1003.49 Swap
hda6 Logical
Linux ext3 20003.89 /home for /dev/hda2, not mounted
hda7 Logical
Linux ext3 20003.89 other personal data for hda2,
not mounted
hda8 Logical
W95 FAT32 (LBA) 10001.95 Shared between hda2 and hda1,
not mounted
Logical
Free Space 25136.46
hda4 Primary
Linux ext3 20974.47 root partition
Output of lspci and lspci -n:
0000:00:00.0 Host bridge: VIA Technologies, Inc. VT8366/A/7 [Apollo
KT266/A/333]
0000:00:01.0 PCI bridge: VIA Technologies, Inc. VT8366/A/7 [Apollo
KT266/A/333 AGP]
0000:00:06.0 Unknown mass storage controller: Promise Technology, Inc.
PDC20265 (FastTrak100 Lite/Ultra100) (rev 02)
0000:00:0d.0 Ethernet controller: Winbond Electronics Corp W89C940
0000:00:0f.0 Multimedia audio controller: Creative Labs SB Audigy (rev 04)
0000:00:0f.1 Input device controller: Creative Labs SB Audigy MIDI/Game
port (rev 04)
0000:00:0f.2 FireWire (IEEE 1394): Creative Labs SB Audigy FireWire Port
(rev 04)
0000:00:11.0 ISA bridge: VIA Technologies, Inc. VT8233 PCI to ISA Bridge
0000:00:11.1 IDE interface: VIA Technologies, Inc.
VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
0000:00:11.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB
1.1 Controller (rev 1b)
0000:00:11.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB
1.1 Controller (rev 1b)
0000:00:11.4 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB
1.1 Controller (rev 1b)
0000:01:00.0 VGA compatible controller: nVidia Corporation NV20
[GeForce3 Ti 200] (rev a3)
lspci -n:
0000:00:00.0 0600: 1106:3099
0000:00:01.0 0604: 1106:b099
0000:00:06.0 0180: 105a:0d30 (rev 02)
0000:00:0d.0 0200: 1050:0940
0000:00:0f.0 0401: 1102:0004 (rev 04)
0000:00:0f.1 0980: 1102:7003 (rev 04)
0000:00:0f.2 0c00: 1102:4001 (rev 04)
0000:00:11.0 0601: 1106:3074
0000:00:11.1 0101: 1106:0571 (rev 06)
0000:00:11.2 0c03: 1106:3038 (rev 1b)
0000:00:11.3 0c03: 1106:3038 (rev 1b)
0000:00:11.4 0c03: 1106:3038 (rev 1b)
0000:01:00.0 0300: 10de:0201 (rev a3)
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot worked: [E]
Configure network HW: [O]
Config network: [O]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Create file systems: [O]
Mount partitions: [O]
Install base system: [O]
Install boot loader: [O]
Reboot: [O]
Comments/Problems:
installed with expert26. red screen due to the problem mentioned in the
errata.
all worked normal, untill a changed to the consoles F2, F3 and F4 while
the base system was being installed. When I switched back,
the screen suddenly wasn't red anymore, but blue as it should be.
Another comment: I have already installed Debian several times with this
installer (using linux26 instead of expert26)
without any problemes except the red screen, although I haven't sent
any install reports yet.
Install logs and other status info is available in
/var/log/debian-installer/.
I attached the log files (except the cdebconf directory because of its size)
Once you have filled out this report, mail it to [EMAIL PROTECTED]
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
