Package: installation-reports INSTALL REPORT
Debian-installer-version: businesscard 20041009 from http://cdimage.debian.org/pub/cdimage-testing/daily/sparc/20041009/sarge-sparc-businesscard.iso (md5sum ) uname -a: 2.4.27 Date: 20040 10 10 Method: hit L1-A after openboot banner appears type 'boot cdrom' in OpenBoot Prom 3.25 type <return> to start installer Machine: Sun Ultra 10 UPA/PCI OpenBoot 3.25 same hardware as Bug#275628 Processor: UltraSPARC-IIi 440MHz Memory: 256Mb (50ns) Root Device: IDE Root Size/partition table: Output of lspci and lspci -n: Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot worked: [E] Configure network HW: [ ] Config network: [ ] Detect CD: [ ] Load installer modules: [ ] Detect hard drives: [ ] Partition hard drives: [ ] Create file systems: [ ] Mount partitions: [ ] Install base system: [ ] Install boot loader: [ ] Reboot: [ ] Comments/Problems: Same hardware as bug Bug#275628. We get further, but not much. Feel free to merge if appropriate. Logs, or as much as I could transcribe: .... Uniform Multi-platform E-IDE driver Revision: 7.00beta4-2.4 ide: Assuming 33MHz system bus speed for PIO modes: override with idebus=xx CMD646: IDE controller at PCI slot 01:03.0 CMD646: chipset revision 3 CMD646: chipset revision 0x03, MultiWord DMA Force Limited ide0: BM-DMA at 0x1fe02c00020-0x1fe02c00027, BIOS settings: hda:pio, hdb:pio ide1: BM-DMA at 0x1fe02c00028-0x1fe02c0002f, BIOS settings: hdc:pio, hdd:pio CMD646: 100% native mode on irq4,7e0 hda: ST39111A, ATA Disk drive ide: Assuming 33MHz system bus speed for PIO modes: override with idebus=xx hdc: CRD-8322B, ATAPI CD/DVD-ROM drive ide0 at 0x1fe02c00007,0x1fe02c0000a on irq 4,7e8 ide1 at 0x1fe02c00017,0x1fe02c0001a on irq 4,7e0 (shared with ide0) Partion check: hda:end_request: I/O error, dev 03:00 (hda) sector 0 end_request: I/0 error, dev 03:00 (hda), sector 2 end_request: I/0 error, dev 03:00 (hda), sector 4 end_request: I/0 error, dev 03:00 (hda), sector 6 end_request: I/0 error, dev 03:00 (hda), sector 8 end_request: I/0 error, dev 03:00 (hda), sector 10 end_request: I/0 error, dev 03:00 (hda), sector 12 end_request: I/0 error, dev 03:00 (hda), sector 14 end_request: I/0 error, dev 03:00 (hda), sector 2 end_request: I/0 error, dev 03:00 (hda), sector 4 end_request: I/0 error, dev 03:00 (hda), sector 6 end_request: I/0 error, dev 03:00 (hda), sector 8 end_request: I/0 error, dev 03:00 (hda), sector 10 end_request: I/0 error, dev 03:00 (hda), sector 12 end_request: I/0 error, dev 03:00 (hda), sector 14 unable to read partition table usb.c: registered new driver usbdevfs usb.c: registered new driver hub usb.c: registered new driver usbmouse usbmouse.c: v1.6:USB HID Boot Protocol mouse driver usb.c: registered new driver usbkbd usbkbd.c: USB HID Boot Protocol keyboard driver mice: PS/2 mouse device common for all mice Initializing Cryptographic API NET4: Linux TCP/IP 1.0 for NET4.0 IP: routing cache hash table of 4096 buckets, 32Kbytes TCP: Hash tabels configured (established 32768 bind 32768) NET4: Unix domain sockets 1.0/SMP for Linux NET4.0 RAMDISK: couldn't find valid RAM disk image starting at 0 Freeing initrd memory: 2823k freed VFS: Mounted root (ext2 filesystem) Mounted devfs on /dev Trying to moove old root to /initrd ... okay VFS: Mounted root (ext2 filesystem) Mounted devfs on /dev Setting up filesystem, please wait ... ~Unimplemented SPARC system call 188 Unimplemented SPARC system call 188 Unimplemented SPARC system call 188 Unimplemented SPARC system call 188 Unimplemented SPARC system call 188 Unimplemented SPARC system call 188 Starting system log daemon: syslogd, klogd. insmod: usbkbd.o: no module by that name found modprobe: failed to load module usbkbd insmod: hid.o: no module by that name found modprobe: failed to load module hid insmod: keybdev.o: no module by that name found modprobe: failed to load module keybdev insmod: usbserial.o: no module by that name found modprobe: failed to load module usbserial (process:238): INFO: kbd-mode: setting console mode to Unicode (UTF-8) Segmentation fault Segmentation fault Segmentation fault ... endlessly At the time the segfault messages start, the frame buffer turns partially red. In solaris there are two graphics devices listed, ffb0, "Creator 3D series2 (FFB2+)", and m64/0, "ATI PGX32 24-bit" The keyboard still works, it is not a usb keyboard but the older style (Sun Type-5 US PC) I also tried this boot line: boot: linux debian-installer/framebuffer=false This was completely ignored, ie the installer turned on the framebuffer display, and failed in the same way. Perhaps my syntax is off? Not according to http://www.debian.org/devel/debian-installer/errata -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
