Package: installation-reports Severity: normal Package: installation-reports
INSTALL REPORT Debian-installer-version: 20041009 http://cdimage.debian.org/pub/cdimage-testing/daily/i386/current/ uname -a: Linux debian 2.6.8-1-686 #1 Tue Sep 14 00:22:58 EDT 2004 i686 GNU/Linux Date: Sun Oct 10 02:25:55 CEST 2004 Method: I downloaded sarge-i386-netinst.iso, burned it to a CD-RW, and tried to boot from that, but that didn't work (see below). I created 2 bootfloppies instead and booted from those. Then I went ahead and performed a network install with the following in my /etc/apt/sources.list: deb http://ftp.se.debian.org/debian/ testing main. The install was nonproxied. Machine: Processor: Intel Celeron 433 MHz Memory: 128 MB SDRAM Root Device: 6.4 GB Quantum Fireball Root Size/partition table: # /etc/fstab: static file system information. # # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc defaults 0 0 /dev/hda1 / ext3 defaults,errors=remount-ro 0 1 /dev/hda9 /home ext3 defaults 0 2 /dev/hda8 /tmp ext3 defaults 0 2 /dev/hda5 /usr ext3 defaults 0 2 /dev/hda6 /var ext3 defaults 0 2 /dev/hda7 none swap sw 0 0 /dev/hdb /media/cdrom0 iso9660 ro,user,noauto 0 0 /dev/fd0 /media/floppy0 auto rw,user,noauto 0 0 Output of lspci and lspci -n: 0000:00:00.0 Host bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX Host bridge (rev 02) 0000:00:01.0 PCI bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge (rev 02) 0000:00:07.0 ISA bridge: Intel Corp. 82371AB/EB/MB PIIX4 ISA (rev 02) 0000:00:07.1 IDE interface: Intel Corp. 82371AB/EB/MB PIIX4 IDE (rev 01) 0000:00:07.2 USB Controller: Intel Corp. 82371AB/EB/MB PIIX4 USB (rev 01) 0000:00:07.3 Bridge: Intel Corp. 82371AB/EB/MB PIIX4 ACPI (rev 02) 0000:00:09.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8029(AS) 0000:01:00.0 VGA compatible controller: nVidia Corporation NV5 [RIVA TNT2/TNT2 Pro] (rev 11) 0000:00:00.0 0600: 8086:7190 (rev 02) 0000:00:01.0 0604: 8086:7191 (rev 02) 0000:00:07.0 0601: 8086:7110 (rev 02) 0000:00:07.1 0101: 8086:7111 (rev 01) 0000:00:07.2 0c03: 8086:7112 (rev 01) 0000:00:07.3 0680: 8086:7113 (rev 02) 0000:00:09.0 0200: 10ec:8029 0000:01:00.0 0300: 10de:0028 (rev 11) Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot worked: [E] Configure network HW: [O] Config network: [O] Detect CD: [ ] Load installer modules: [O] Detect hard drives: [ ] Partition hard drives: [O] Create file systems: [ ] Mount partitions: [ ] Install base system: [O] Install boot loader: [O] Reboot: [O] Comments/Problems: First I tried sarge-i386-netinst.iso, burned to a CD-RW, but that failed to boot with the message "ISOLINUX 2.04 2003-04-16 isolinux: Disk error 01,AX=4263,9f". (I had the same problem with Woody, by the way...) I verified that the CD-RW was burned correctly by booting it in another computer without problems. Then I downloaded a Knoppix iso and tried that, because I thought that maybe my Aopen DVD-ROM was flakey, but the Knoppix cd booted OK. I tried to verify what Knoppix said about ISOLINUX, but it flashed by to fast to see... I gave up at this point and created 2 boot floppies, but if more information would be helpful just send me an email and I will try to answer any questions. Everything went very smoothly after I had created the bootfloppies. Keep up the good work! /Jimmy Once you have filled out this report, mail it to [EMAIL PROTECTED] -- System Information: Debian Release: 3.1 APT prefers testing APT policy: (500, 'testing') Architecture: i386 (i686) Kernel: Linux 2.6.8-1-686 Locale: LANG=en_US, LC_CTYPE=en_US -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
