Package: installation-reports INSTALL REPORT
Debian-installer-version: 14-10-2004 11:30 http://cdimage.debian.org/pub/cdimage-testing/sid_d-i/i386/pre-rc2/sarge-i386-netinst.iso uname -a: bug239966:~# uname -a Linux bug239966 2.4.27-1-686 #1 Fri Sep 3 06:28:00 UTC 2004 i686 GNU/Linux Date: 14-10-2004 21:30.00 Method: Network install from ftp.nl.debian.org (not proxied) Machine: Clone Processor: Dual P3 800 Mhz Memory: 1024 Mb Root Device: IDE Seagate 80 Gb Root Size/partition table: bug239966:~# fdisk -l /dev/hdf Disk /dev/hdf: 82.3 GB, 82348277760 bytes 255 heads, 63 sectors/track, 10011 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/hdf1 * 1 12 96358+ 83 Linux /dev/hdf2 13 134 979965 83 Linux /dev/hdf3 135 10011 79337002+ 5 Extended /dev/hdf5 135 1350 9767488+ 83 Linux /dev/hdf6 1351 2566 9767488+ 83 Linux /dev/hdf7 2567 5605 24410736 83 Linux /dev/hdf8 5606 8644 24410736 83 Linux /dev/hdf9 8645 8766 979933+ 82 Linux swap /dev/hdf10 8767 10011 10000431 83 Linux Output of lspci: bug239966:~# lspci 0000:00:00.0 Host bridge: VIA Technologies, Inc. VT82C693A/694x [Apollo PRO133x] (rev c4) 0000:00:01.0 PCI bridge: VIA Technologies, Inc. VT82C598/694x [Apollo MVP3/Pro133x AGP] 0000:00:07.0 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super South] (rev 40) 0000:00:07.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06) 0000:00:07.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 16) 0000:00:07.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 16) 0000:00:07.4 Bridge: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] (rev 40) 0000:00:0a.0 Ethernet controller: 3Com Corporation 3c905 100BaseTX [Boomerang] 0000:00:0b.0 Multimedia audio controller: Creative Labs SB Audigy LS 0000:00:0b.1 Input device controller: Creative Labs SB Audigy LS MIDI/Game port 0000:00:0c.0 RAID bus controller: Silicon Image, Inc. (formerly CMD Technology Inc) PCI0680 Ultra ATA-133 Host Controller (rev 02) 0000:01:00.0 VGA compatible controller: ATI Technologies Inc RV280 [Radeon 9200 SE] (rev 01) 0000:01:00.1 Display controller: ATI Technologies Inc RV280 [Radeon 9200 SE] (Secondary) (rev 01) First install: Base System Installation Checklist: Initial boot worked: [O] Configure network HW: [O] Config network: [O] Detect CD: [O] Load installer modules: [O] Detect hard drives: [O] Partition hard drives: [O] Create file systems: [O] Mount partitions: [O] Install base system: [O] Install boot loader: [O] Reboot: [O] [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Comments/Problems: Hi Joey, Tested the installer to day. Results seems to be fine Changed the HDD because i wanted to keep my installation. Tried several installation and tried to reproduce bug #239966. No problems found during all installations. Nice job folks. If you need more info just ask Kind Regards, Michel van der Klei
signature.asc
Description: This is a digitally signed message part
