Package: installation-reports Debian-installer-version: downloaded from debian.org on 12 sept 2004 uname -a: Linux (none) 2.4.26-1-generic #1 Tue Sep 14 5:50 PDT 2004 alpha unknown (during installer) Date: Tue Sep 14 5:50 Method: Booted of net-installer CD
Machine: Digital Personal Workstation 500a with Adaptec AHA2940UW controller Processor: alpha EV56 500MHz Memory: 384Mb Root Device: SCSI-disk 4Gb on AHA2940UW controller Root Size/partition table: - Output of lspci and lspci -n: - Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot worked: [OK] Configure network HW: [OK] Config network: [OK] Detect CD: [OK] Load installer modules: [OK] Detect hard drives: [OK] Partition hard drives: [E] Create file systems: [ ] Mount partitions: [ ] Install base system: [ ] Install boot loader: [ ] Reboot: [ ] Comments/Problems: Unable to handle kernel paging request at virtual address 000000000000000c Kernel panic: attempt to kill the idle task! In idle task - not syncing Unable to handle kernel paging request at virtual address 000000000000000c After this, I need to powercycle in order to boot of CD again. Just pressing the reset-switch is not enough. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
