Package: installation-reports INSTALL REPORT
Debian-installer-version: daily built CD image from Jul 18, 2004: http://cdimage.debian.org/pub/cdimage-testing/daily/powerpc/20040718/sarge-powerpc-netinst.iso uname -a: Linux veggie 2.6.7-powerpc #1 Sat Jul 10 03:47:45 CEST 2004 ppc GNU/Linux Date: Jul 19, 2004 Method: - boot from CD - attached ethernet network - booted with option 'install-2.6' Machine: Apple iBook G4; model M9164D/A Processor: processor : 0 cpu : 7455, altivec supported clock : 798MHz revision : 3.3 (pvr 8001 0303) bogomips : 804.39 machine : PowerBook6,3 motherboard : PowerBook6,3 MacRISC3 Power Macintosh detected as : 287 (iBook G4) pmac flags : 0000000a L2 cache : 256K unified memory : 256MB pmac-generation : NewWorld Memory: 256 MB Root Device: IDE /dev/hda4 Root Size/partition table: # type name length base ( size ) system /dev/hda1 Apple_partition_map Apple 63 @ 1 ( 31.5k) Partition map /dev/hda2 Apple_Bootstrap Apple_Bootstrap 1954 @ 64 (977.0k) NewWorld bootblock /dev/hda3 Apple_UNIX_SVR2 swap 585938 @ 2018 (286.1M) Linux swap /dev/hda4 Apple_UNIX_SVR2 Debian 7812501 @ 587956 ( 3.7G) Linux native /dev/hda5 Apple_HFS Apple_HFS_Untitled_5 12582824 @ 46022280 ( 6.0G) HFS /dev/hda6 Apple_UNIX_SVR2 home 37621823 @ 8400457 ( 17.9G) Linux native /dev/hda7 Apple_Free Extra 16 @ 58605104 ( 8.0k) Free space hda4: /, hda6: /home, hda3: swap, hda2: bootstrap (other partitions were not used) Output of lspci and lspci -n: 0000:00:0b.0 Host bridge: Apple Computer Inc. UniNorth 2 AGP 0000:00:10.0 VGA compatible controller: ATI Technologies Inc RV250 5c63 [Radeon Mobility 9200 M9+] (rev 01) 0001:01:0b.0 Host bridge: Apple Computer Inc. UniNorth 2 PCI 0001:01:17.0 ff00: Apple Computer Inc. KeyLargo/Intrepid Mac I/O 0001:01:18.0 USB Controller: Apple Computer Inc. KeyLargo/Intrepid USB 0001:01:19.0 USB Controller: Apple Computer Inc. KeyLargo/Intrepid USB 0001:01:1a.0 USB Controller: Apple Computer Inc. KeyLargo/Intrepid USB 0001:01:1b.0 USB Controller: NEC Corporation USB (rev 43) 0001:01:1b.1 USB Controller: NEC Corporation USB (rev 43) 0001:01:1b.2 USB Controller: NEC Corporation USB 2.0 (rev 04) 0002:02:0b.0 Host bridge: Apple Computer Inc. UniNorth 2 Internal PCI 0002:02:0d.0 ff00: Apple Computer Inc. UniNorth/Intrepid ATA/100 0002:02:0e.0 FireWire (IEEE 1394): Apple Computer Inc. UniNorth 2 FireWire (rev 81) 0002:02:0f.0 Ethernet controller: Apple Computer Inc. UniNorth 2 GMAC (Sun GEM) (rev 80) 0000:00:0b.0 0600: 106b:0034 0000:00:10.0 0300: 1002:5c63 (rev 01) 0001:01:0b.0 0600: 106b:0035 0001:01:17.0 ff00: 106b:003e 0001:01:18.0 0c03: 106b:003f 0001:01:19.0 0c03: 106b:003f 0001:01:1a.0 0c03: 106b:003f 0001:01:1b.0 0c03: 1033:0035 (rev 43) 0001:01:1b.1 0c03: 1033:0035 (rev 43) 0001:01:1b.2 0c03: 1033:00e0 (rev 04) 0002:02:0b.0 0600: 106b:0036 0002:02:0d.0 ff00: 106b:003b 0002:02:0e.0 0c00: 106b:0031 (rev 81) 0002:02:0f.0 0200: 106b:0032 (rev 80) Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot worked: [O] Configure network HW: [O] Config network: [O] Detect CD: [O] Load installer modules: [O] Detect hard drives: [O] Partition hard drives: [O] Create file systems: [O] Mount partitions: [O] Install base system: [!] (see below) Install boot loader: [O] Reboot: [O] Comments/Problems: - Although I did 'install-2.6' and d-i indeed used kernel 2.6.7, it installed a base system with kernel 2.4.25. X and power management does not work with 2.4. I installed 2.6.7 manually, now everything works. - when configuring the base system, the first debconf template (from console-data) is obviously encoded in UTF-8, but shown as latin1, i. e. the umlauts were totally scrambled. All other templates work normally. - I chose German keymap (de-latin1), but the alt and command keys are swapped in the text consoles (this works correctly under X). Nevertheless, great job! Thanks for your hard work! Martin -- Martin Pitt Debian GNU/Linux Developer [EMAIL PROTECTED] [EMAIL PROTECTED] http://www.piware.de http://www.debian.org -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
