No-go on that one either. I used the 21 June image. In expert mode, it
said something about needing an IDE to RAID adapter driver or something
like that.
Here's a link to the Promise driver source I mentioned earlier:
http://www.promise.com/support/download/download2_eng.asp?productId=98&category=driver&os=4
Not sure if that will help.
Any other ideas?
-Olek
At 10:04 AM 6/20/2004, Christian Perrier wrote:
> Installer could not detect the SATA hard drive that was connected through
> a Promise SATA150 TX4 PCI interface card (non-RAID). At the partitioning
> step, no hard drives were available. Still working on a way to get Debian
> to see my drive... Promise provides driver source code but my old drive
> crashed and the MB doesn't support new, high-capacity drives. Is it
> possible to have that driver on the install CD?
Can you test with the following image:
http://gluck.debian.org/cdimage/testing/sid_d-i/i386/current/sarge-i386-netinst.iso
(possibly download it after 20:00UTC)
--
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
