On Fri, Jan 09, 2004 at 11:35:23AM -0500, Erik Dykema wrote: > This is my third install report, apoligies for errors, welcome > correction. It is similar but more complete (due to the busybox bug > being fixed) than yesterday's with the same kernel install problem. > Is there an outstanding bug in mkinitrd / initrd-tools that is > causing this?
> INSTALL REPORT > Debian-installer-version: Jan 09 Daily, from > http://people.debian.org/~manty/testing/netinst/i386/daily/ > uname -a: Linux hpdemo 2.4.22-1-386 #9 Sat Oct 4 14:30:39 EST 2003 i686 > unknown > Date: Jan 8, 2004, 11:00am > Method: sarge-i386-netinst.iso > Machine: HP DL360 G3 > Processor: 1 Intel Xeon > Memory: 1024 mb > Root Device: Smart Array 5i/532 w/ 2 36g scsi drives as raid 0+1 array. > Root Size/partition table: > disk1 ext2 34 gigs > disk5 linux swap 1 gig > Output of lspci: > lspci not found > Base System Installation Checklist: > Initial boot worked: [O] > Configure network HW: [O] > Config network: [O] > Detect CD: [O] > Load installer modules: [O] > Detect hard drives: [O] > Partition hard drives: [E] * See prev. report > Create file systems: [E] * See prev. report > Mount partitions: [E] * See prev. report > Install base system: [E] > Install boot loader: [ ] > Reboot: [ ] > [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it > Comments/Problems: > 1. Everything seems to install fine excepting the kernel. The red > screen comes up and says that the kernel failed. I hit alt-f3 to see > what happened, and find the following: > Selecting ... > Unpacking ... > Selecting ... > Unpacking kernel-image-2.4.386 (from ...) > ... > Setting up kernel-image-2.4.23-1-386 (2.4.23-1) > error reading /lib/modules/2.4.23-1-386/build : No such file or directory > Deleting /lib/modules/2.4.23-1-386/build > /usr/sbin/mkinitrd: constituant device /dev/cciss/disc0/part1 does not exist > Failed to create initrd image. > dpkg: error processing kernel-image-2.4.23-1-386 (--configure): > subprocess post-installation script returned error exit status 9 > .... etc > /dev/cciss is the hardware raid device. > ~ # ls -l /dev/cciss/disc0 > brw--- 1 root root 104, 0 disc > brw--- 1 root root 104, 1 part1 > brw--- 1 root root 104, 2 part2 > brw--- 1 root root 104, 5 part5 > Things that seem curious: > Why is mkinitd caring about my hardware devices, doesn't it just > need to see the files in /target? mkinitrd needs to build an initrd that will be able to find the real root device after booting. If /target/dev/cciss doesn't exist, mkinitrd has nothing to work from to figure out what the correct device is. IIRC, devfs is not actually used in the target, only in the root; so probably d-i needs to know how to map /dev/cciss/disc0/partX to a non-devfs device name (and make sure this mapped device is available in the target, i.e., MAKEDEV). > Why are there 3 partitions, there are only two in cfdisk (ext2, > swap). Unless it counts a few megs of free space as another partition. You seem to have created one primary and one logical (extended) partition. part5 would be the first logical partition in a DOS partition table, and is contained within whichever one of part1 or part2 is the extended partition. -- Steve Langasek postmodern programmer
pgp00000.pgp
Description: PGP signature
