Your message dated Sun, 10 Jan 2016 18:19:54 +0000
with message-id <e1aikao-0004dl...@franck.debian.org>
and subject line Bug#725642: fixed in partman-auto 133
has caused the Debian Bug report #725642,
regarding installation-reports: Successful install of Debian Stretch on
Sheevaplug
to be marked as done.
This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.
(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact ow...@bugs.debian.org
immediately.)
--
725642: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=725642
Debian Bug Tracking System
Contact ow...@bugs.debian.org with problems
--- Begin Message ---
Package: installation-reports
Severity: normal
Dear Maintainer,
First, I upgraded U-boot on the machine to version "2014.10+dfsg1-5"
Second, I downloaded uImage and uInitrd from
https://d-i.debian.org/daily-images/armel/daily/kirkwood/netboot/marvell/sheevaplug/
and put them on a USB stick (8GB) prepared with an ext2 filesystem.
Then I connected to the serial port (using "screen -L /dev/ttyUSB0 115200")
and followed the instructions on Martin's website
http://www.cyrius.com/debian/kirkwood/sheevaplug/install/
to boot the installer.
At the first installer screen, I hit "back" a couple of times till I got to the
main menu
where I could get a screen that allowed me to change the installer priority
to "low" (i.e. to make it an "expert" install)
Then I followed the normal installation procedure til it got to the screen
asking which
non-standard udebs I wanted to install. I chose the network-console so I could
log in
via ssh with a larger screen than 24x80.
After that, it was just answering questions as usual, taking defaults whenever
I could.
When it got to tasksel, I chose a basic installation with only the ssh server
enabled,
but nothing else.
After the reboot (and some more u-boot magic from Martin's web page) I used
tasksel
to install the print-server task. No problems were encountered.
I also moved /tmp to tmpfs
-- Package-specific info:
Boot method: I followed the instructions from Martin Michlmayer's web page,
Image version: I got the uI* files from
https://d-i.debian.org/daily-images/armel/daily/kirkwood/netboot/
Date: 2015/01/03 about 23:30 UTC
Machine: Stock Sheevaplug without SATA
Partitions: <df -Tl will do; the raw partition table is preferred>
Disk /dev/sda: 7.2 GiB, 7748222976 bytes, 15133248 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x74cb16e8
Device Boot Start End Sectors Size Id Type
/dev/sda1 * 2048 499711 497664 243M 83 Linux
/dev/sda2 499712 4829183 4329472 2.1G 83 Linux
/dev/sda3 4831230 15132671 10301442 4.9G 5 Extended
/dev/sda5 4831232 5294079 462848 226M 82 Linux swap / Solaris
/dev/sda6 5296128 15132671 9836544 4.7G 83 Linux
Filesystem Type 1K-blocks Used Available Use% Mounted on
udev devtmpfs 10240 0 10240 0% /dev
tmpfs tmpfs 102788 348 102440 1% /run
/dev/sda2 ext4 2065152 1878636 61896 97% /
tmpfs tmpfs 256964 0 256964 0% /dev/shm
tmpfs tmpfs 5120 0 5120 0% /run/lock
tmpfs tmpfs 256964 0 256964 0% /sys/fs/cgroup
tmpfs tmpfs 102400 20 102380 1% /tmp
/dev/sda6 ext4 4709920 9736 4437888 1% /home
/dev/sda1 ext2 240972 44594 183937 20% /boot
tmpfs tmpfs 51396 0 51396 0% /run/user/1000
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot: [o]
Detect network card: [o]
Configure network: [o]
Detect CD: [ ]
Load installer modules: [o]
Clock/timezone setup: [o]
User/password setup: [o]
Detect hard drives: [o]
Partition hard drives: [o] see note 1
Install base system: [o]
Install tasks: [o]
Install boot loader: [ ]
Overall install: [o]
Comments/Problems:
note 1: As you can see from the partition table shown above, It took
almost 5GB of the 8GB USB stick I gave it for /home. This leaves root
and swap perilously little space for anything but a very basic install.
If I ran the world, I'd make sure that the root ("everything but /home and swap)
partition got at least 4GB; and swap got at least 4 times the size of system
RAM.
--
Please make sure that the hardware-summary log file, and any other
installation logs that you think would be useful are attached to this
report. Please compress large files using gzip.
Once you have filled out this report, mail it to sub...@bugs.debian.org.
==============================================
Installer lsb-release:
==============================================
DISTRIB_ID=Debian
DISTRIB_DESCRIPTION="Debian GNU/Linux installer"
DISTRIB_RELEASE="9 (stretch) - installer build 20160104-00:05"
X_INSTALLATION_MEDIUM=netboot
==============================================
Installer hardware-summary:
==============================================
uname -a: Linux sheeva 4.3.0-1-kirkwood #1 Debian 4.3.3-4 (2016-01-03) armv5tel
GNU/Linux
usb-list:
usb-list: Bus 01 Device 01: EHCI Host Controller [1d6b:0002]
usb-list: Level 00 Parent 00 Port 00 Class 09(hub ) Subclass 00 Protocol 01
usb-list: Manufacturer: Linux 4.3.0-1-kirkwood ehci_hcd
usb-list: Interface 00: Class 09(hub ) Subclass 00 Protocol 00 Driver hub
usb-list:
usb-list: Bus 01 Device 02: USB DISK 2.0 [13fe:4100]
usb-list: Level 01 Parent 01 Port 00 Class 00(>ifc ) Subclass 00 Protocol 00
usb-list: Manufacturer:
usb-list: Interface 00: Class 08(mstor) Subclass 06 Protocol 50 Driver
usb-storage
lsmod: Module Size Used by
lsmod: dm_mod 86182 0
lsmod: md_mod 107660 0
lsmod: jfs 156468 0
lsmod: crc32c_generic 1593 1
lsmod: btrfs 997092 0
lsmod: xor 4321 1 btrfs
lsmod: raid6_pq 87146 1 btrfs
lsmod: vfat 8653 0
lsmod: fat 49558 1 vfat
lsmod: ext4 485959 3
lsmod: crc16 1261 1 ext4
lsmod: mbcache 5650 1 ext4
lsmod: jbd2 80618 1 ext4
lsmod: sd_mod 28714 5
lsmod: usb_storage 42982 4
lsmod: scsi_mod 174053 2 usb_storage,sd_mod
lsmod: mmc_block 24550 0
lsmod: ehci_orion 3050 0
lsmod: ehci_hcd 50287 1 ehci_orion
lsmod: mvsdio 9166 0
lsmod: mmc_core 105819 2 mmc_block,mvsdio
lsmod: mvmdio 3100 0
lsmod: mv643xx_eth 26611 0
lsmod: usbcore 142576 3 usb_storage,ehci_hcd,ehci_orion
lsmod: of_mdio 2709 3 mvmdio,mv643xx_eth
lsmod: libphy 23500 3 mvmdio,of_mdio,mv643xx_eth
lsmod: usb_common 3026 1 usbcore
df: Filesystem 1K-blocks Used Available Use% Mounted on
df: none 51396 64 51332 0% /run
df: devtmpfs 253472 0 253472 0% /dev
df: /dev/sda2 2065152 586144 1354388 30% /target
df: /dev/sda1 240972 29441 199090 13% /target/boot
df: /dev/sda6 4709920 9640 4437984 0% /target/home
df: /dev/sda2 2065152 586144 1354388 30% /dev/.static/dev
df: devtmpfs 253472 0 253472 0% /target/dev
free: total used free shared buffers
free: Mem: 513932 404520 109412 47696 35908
free: -/+ buffers: 368612 145320
free: Swap: 231420 11008 220412
/proc/cmdline: console=ttyS0,115200n8
base-installer/initramfs-tools/driver-policy=most
/proc/cpuinfo: processor : 0
/proc/cpuinfo: model name : Feroceon 88FR131 rev 1 (v5l)
/proc/cpuinfo: BogoMIPS : 1185.79
/proc/cpuinfo: Features : swp half thumb fastmult edsp
/proc/cpuinfo: CPU implementer : 0x56
/proc/cpuinfo: CPU architecture: 5TE
/proc/cpuinfo: CPU variant : 0x2
/proc/cpuinfo: CPU part : 0x131
/proc/cpuinfo: CPU revision : 1
/proc/cpuinfo:
/proc/cpuinfo: Hardware : Marvell Kirkwood (Flattened Device Tree)
/proc/cpuinfo: Revision : 0000
/proc/cpuinfo: Serial : 0000000000000000
/proc/device-tree/model: Globalscale Technologies SheevaPlug /proc/iomem:
00000000-1fffffff : System RAM
/proc/iomem: 00008000-0050438b : Kernel code
/proc/iomem: 00548000-005e312b : Kernel data
/proc/iomem: f1001418-f100141b : kirkwood_cpuidle
/proc/iomem: f1001418-f100141b : kirkwood_cpuidle
/proc/iomem: f1010000-f101001f : /ocp@f1000000/pin-controller@10000
/proc/iomem: f1010100-f101013f : /ocp@f1000000/gpio@10100
/proc/iomem: f1010140-f101017f : /ocp@f1000000/gpio@10140
/proc/iomem: f1010300-f101031f : /ocp@f1000000/rtc@10300
/proc/iomem: f1012000-f10120ff : serial
/proc/iomem: f1020104-f1020107 : kirkwood-cpufreq
/proc/iomem: f1020104-f1020107 : kirkwood-cpufreq
/proc/iomem: f1020110-f1020117 : bridge-interrupt-ctrl
/proc/iomem: f1020200-f102020f : main-interrupt-ctrl
/proc/iomem: f1020210-f102021f : main-interrupt-ctrl
/proc/iomem: f1050000-f1050fff : /ocp@f1000000/ehci@50000
/proc/iomem: f1082000-f1082333 : /ocp@f1000000/sata-phy@82000
/proc/iomem: f1084000-f1084333 : /ocp@f1000000/sata-phy@84000
/proc/iomem: f1090000-f10901ff : /ocp@f1000000/mvsdio@90000
/proc/iomem: f4000000-f40003ff : /mbus/nand@012f
/proc/interrupts: CPU0
/proc/interrupts: 17: 469514 bridge-interrupt-ctrl 2 Edge
orion_event
/proc/interrupts: 26: 4051 main-interrupt-ctrl 33 Edge serial
/proc/interrupts: 29: 280988 main-interrupt-ctrl 19 Edge
ehci_hcd:usb1
/proc/interrupts: 30: 57816 main-interrupt-ctrl 46 Edge
f1072004.mdio-bus
/proc/interrupts: 31: 1 main-interrupt-ctrl 53 Edge
f1010300.rtc
/proc/interrupts: 32: 10031 main-interrupt-ctrl 28 Edge mvsdio
/proc/interrupts: 83: 2 main-interrupt-ctrl 5 Edge
f1060800.xor
/proc/interrupts: 84: 2 main-interrupt-ctrl 7 Edge
f1060900.xor
/proc/interrupts: 85: 135572 main-interrupt-ctrl 11 Edge eth0
/proc/interrupts: Err: 0
/proc/meminfo: MemTotal: 513932 kB
/proc/meminfo: MemFree: 109412 kB
/proc/meminfo: MemAvailable: 380800 kB
/proc/meminfo: Buffers: 35908 kB
/proc/meminfo: Cached: 266156 kB
/proc/meminfo: SwapCached: 2924 kB
/proc/meminfo: Active: 144332 kB
/proc/meminfo: Inactive: 218020 kB
/proc/meminfo: Active(anon): 13608 kB
/proc/meminfo: Inactive(anon): 94376 kB
/proc/meminfo: Active(file): 130724 kB
/proc/meminfo: Inactive(file): 123644 kB
/proc/meminfo: Unevictable: 0 kB
/proc/meminfo: Mlocked: 0 kB
/proc/meminfo: HighTotal: 0 kB
/proc/meminfo: HighFree: 0 kB
/proc/meminfo: LowTotal: 513932 kB
/proc/meminfo: LowFree: 109412 kB
/proc/meminfo: SwapTotal: 231420 kB
/proc/meminfo: SwapFree: 220412 kB
/proc/meminfo: Dirty: 636 kB
/proc/meminfo: Writeback: 0 kB
/proc/meminfo: AnonPages: 57408 kB
/proc/meminfo: Mapped: 4824 kB
/proc/meminfo: Shmem: 47696 kB
/proc/meminfo: Slab: 32488 kB
/proc/meminfo: SReclaimable: 28528 kB
/proc/meminfo: SUnreclaim: 3960 kB
/proc/meminfo: KernelStack: 688 kB
/proc/meminfo: PageTables: 864 kB
/proc/meminfo: NFS_Unstable: 0 kB
/proc/meminfo: Bounce: 0 kB
/proc/meminfo: WritebackTmp: 0 kB
/proc/meminfo: CommitLimit: 488384 kB
/proc/meminfo: Committed_AS: 126444 kB
/proc/meminfo: VmallocTotal: 499712 kB
/proc/meminfo: VmallocUsed: 6000 kB
/proc/meminfo: VmallocChunk: 487428 kB
-- System Information:
Debian Release: stretch/sid
APT prefers unstable
APT policy: (500, 'unstable'), (500, 'testing')
Architecture: armel (armv5tel)
Kernel: Linux 4.3.0-1-kirkwood
Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
--- End Message ---
--- Begin Message ---
Source: partman-auto
Source-Version: 133
We believe that the bug you reported is fixed in the latest version of
partman-auto, which is due to be installed in the Debian FTP archive.
A summary of the changes between this version and the previous one is
attached.
Thank you for reporting the bug, which will now be closed. If you
have further comments please address them to 725...@bugs.debian.org,
and the maintainer will reopen the bug report if appropriate.
Debian distribution maintenance software
pp.
Christian Perrier <bubu...@debian.org> (supplier of updated partman-auto
package)
(This message was generated automatically at their request; if you
believe that there is a problem with it please contact the archive
administrators by mailing ftpmas...@ftp-master.debian.org)
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA256
Format: 1.8
Date: Sun, 10 Jan 2016 07:01:50 +0100
Source: partman-auto
Binary: partman-auto
Architecture: source i386
Version: 133
Distribution: unstable
Urgency: medium
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Changed-By: Christian Perrier <bubu...@debian.org>
Description:
partman-auto - Automatically partition storage devices (partman) (udeb)
Closes: 725642 770032 803604
Changes:
partman-auto (133) unstable; urgency=medium
.
[ Martin Michlmayr ]
* Update partition layout defaults:
- atomic:
- Set minimimum size of / partition to 900 MB for platforms without
separate /boot partition and to 800 MB for those with /boot.
- home:
- Increase maximum size of / partition to 20 GB or 30 GB, depending
on the platform.
- Increase minimum size of / partition to 1500 MB and of /home to
1000 MB. This allocates more space to the / partition on smaller
disks and ensures the separate /home option is not offered on 2 GB
disks.
- Increase priority of / partition so more space is allocated to it
on small disks. Closes: #770032
- multi:
- Increase maximum size of / partition to 25 GB. Closes: #725642
- Increase maximum size of /var partition to 10 GB. Closes: #803604
- Increase maximum size of /tmp partition to 2 GB.
- Increase minimum size of / partition to 2000 MB, of /var to 1000 MB,
of /tmp to 256 MB and of /home to 4000 MB. This ensures that this
option is no longer offered on 4 GB disks.
- Increase priority of /home partition since most space should be
allocated to it.
- Increase priority of /tmp partition so more than the minimum is
allocated to it.
- Adjust priority of / partition in relation to other partitions.
Checksums-Sha1:
cd98dfea7dd5f0f79d67f91b8bb2a347e5824544 1614 partman-auto_133.dsc
c25f3c1f6b19fffbba7d343732a09d98376032ba 107940 partman-auto_133.tar.xz
e1d86bfef1ee49b9333e4d06e1dba354edd6fcd5 86812 partman-auto_133_i386.udeb
Checksums-Sha256:
d71279e38e1c7310a3f52f7248fc536849cace96b596def11221643ba208aabb 1614
partman-auto_133.dsc
1539ca5288812328d6bab07f3a7891bdb59f4990354240ee8d68ddc7b55ea391 107940
partman-auto_133.tar.xz
6586c6533874f03fac9b58ce4febe109e8ddec2bff47f12cf872146e4a03d092 86812
partman-auto_133_i386.udeb
Files:
9a1a1e0ec0a2af927d279e529fdce66c 1614 debian-installer standard
partman-auto_133.dsc
e9c51e5d8a2174656157422948766f4a 107940 debian-installer standard
partman-auto_133.tar.xz
3b251c8befc2628c5ac3ae61793d4c91 86812 debian-installer standard
partman-auto_133_i386.udeb
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=2xck
-----END PGP SIGNATURE-----
--- End Message ---
