Package: installation-reports
Severity: normal
Dear Maintainer,
First, I upgraded U-boot on the machine to version "2014.10+dfsg1-5"
Second, I downloaded uImage and uInitrd from
https://d-i.debian.org/daily-images/armel/daily/kirkwood/netboot/marvell/sheevaplug/
and put them on a USB stick (8GB) prepared with an ext2 filesystem.
Then I connected to the serial port (using "screen -L /dev/ttyUSB0 115200")
and followed the instructions on Martin's website
http://www.cyrius.com/debian/kirkwood/sheevaplug/install/
to boot the installer.
At the first installer screen, I hit "back" a couple of times till I got to the
main menu
where I could get a screen that allowed me to change the installer priority
to "low" (i.e. to make it an "expert" install)
Then I followed the normal installation procedure til it got to the screen
asking which
non-standard udebs I wanted to install. I chose the network-console so I could
log in
via ssh with a larger screen than 24x80.
After that, it was just answering questions as usual, taking defaults whenever
I could.
When it got to tasksel, I chose a basic installation with only the ssh server
enabled,
but nothing else.
After the reboot (and some more u-boot magic from Martin's web page) I used
tasksel
to install the print-server task. No problems were encountered.
I also moved /tmp to tmpfs
-- Package-specific info:
Boot method: I followed the instructions from Martin Michlmayer's web page,
Image version: I got the uI* files from
https://d-i.debian.org/daily-images/armel/daily/kirkwood/netboot/
Date: 2015/01/03 about 23:30 UTC
Machine: Stock Sheevaplug without SATA
Partitions: <df -Tl will do; the raw partition table is preferred>
Disk /dev/sda: 7.2 GiB, 7748222976 bytes, 15133248 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x74cb16e8
Device Boot Start End Sectors Size Id Type
/dev/sda1 * 2048 499711 497664 243M 83 Linux
/dev/sda2 499712 4829183 4329472 2.1G 83 Linux
/dev/sda3 4831230 15132671 10301442 4.9G 5 Extended
/dev/sda5 4831232 5294079 462848 226M 82 Linux swap / Solaris
/dev/sda6 5296128 15132671 9836544 4.7G 83 Linux
Filesystem Type 1K-blocks Used Available Use% Mounted on
udev devtmpfs 10240 0 10240 0% /dev
tmpfs tmpfs 102788 348 102440 1% /run
/dev/sda2 ext4 2065152 1878636 61896 97% /
tmpfs tmpfs 256964 0 256964 0% /dev/shm
tmpfs tmpfs 5120 0 5120 0% /run/lock
tmpfs tmpfs 256964 0 256964 0% /sys/fs/cgroup
tmpfs tmpfs 102400 20 102380 1% /tmp
/dev/sda6 ext4 4709920 9736 4437888 1% /home
/dev/sda1 ext2 240972 44594 183937 20% /boot
tmpfs tmpfs 51396 0 51396 0% /run/user/1000
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot: [o]
Detect network card: [o]
Configure network: [o]
Detect CD: [ ]
Load installer modules: [o]
Clock/timezone setup: [o]
User/password setup: [o]
Detect hard drives: [o]
Partition hard drives: [o] see note 1
Install base system: [o]
Install tasks: [o]
Install boot loader: [ ]
Overall install: [o]
Comments/Problems:
note 1: As you can see from the partition table shown above, It took
almost 5GB of the 8GB USB stick I gave it for /home. This leaves root
and swap perilously little space for anything but a very basic install.
If I ran the world, I'd make sure that the root ("everything but /home and swap)
partition got at least 4GB; and swap got at least 4 times the size of system
RAM.
--
Please make sure that the hardware-summary log file, and any other
installation logs that you think would be useful are attached to this
report. Please compress large files using gzip.
Once you have filled out this report, mail it to sub...@bugs.debian.org.
==============================================
Installer lsb-release:
==============================================
DISTRIB_ID=Debian
DISTRIB_DESCRIPTION="Debian GNU/Linux installer"
DISTRIB_RELEASE="9 (stretch) - installer build 20160104-00:05"
X_INSTALLATION_MEDIUM=netboot
==============================================
Installer hardware-summary:
==============================================
uname -a: Linux sheeva 4.3.0-1-kirkwood #1 Debian 4.3.3-4 (2016-01-03) armv5tel
GNU/Linux
usb-list:
usb-list: Bus 01 Device 01: EHCI Host Controller [1d6b:0002]
usb-list: Level 00 Parent 00 Port 00 Class 09(hub ) Subclass 00 Protocol 01
usb-list: Manufacturer: Linux 4.3.0-1-kirkwood ehci_hcd
usb-list: Interface 00: Class 09(hub ) Subclass 00 Protocol 00 Driver hub
usb-list:
usb-list: Bus 01 Device 02: USB DISK 2.0 [13fe:4100]
usb-list: Level 01 Parent 01 Port 00 Class 00(>ifc ) Subclass 00 Protocol 00
usb-list: Manufacturer:
usb-list: Interface 00: Class 08(mstor) Subclass 06 Protocol 50 Driver
usb-storage
lsmod: Module Size Used by
lsmod: dm_mod 86182 0
lsmod: md_mod 107660 0
lsmod: jfs 156468 0
lsmod: crc32c_generic 1593 1
lsmod: btrfs 997092 0
lsmod: xor 4321 1 btrfs
lsmod: raid6_pq 87146 1 btrfs
lsmod: vfat 8653 0
lsmod: fat 49558 1 vfat
lsmod: ext4 485959 3
lsmod: crc16 1261 1 ext4
lsmod: mbcache 5650 1 ext4
lsmod: jbd2 80618 1 ext4
lsmod: sd_mod 28714 5
lsmod: usb_storage 42982 4
lsmod: scsi_mod 174053 2 usb_storage,sd_mod
lsmod: mmc_block 24550 0
lsmod: ehci_orion 3050 0
lsmod: ehci_hcd 50287 1 ehci_orion
lsmod: mvsdio 9166 0
lsmod: mmc_core 105819 2 mmc_block,mvsdio
lsmod: mvmdio 3100 0
lsmod: mv643xx_eth 26611 0
lsmod: usbcore 142576 3 usb_storage,ehci_hcd,ehci_orion
lsmod: of_mdio 2709 3 mvmdio,mv643xx_eth
lsmod: libphy 23500 3 mvmdio,of_mdio,mv643xx_eth
lsmod: usb_common 3026 1 usbcore
df: Filesystem 1K-blocks Used Available Use% Mounted on
df: none 51396 64 51332 0% /run
df: devtmpfs 253472 0 253472 0% /dev
df: /dev/sda2 2065152 586144 1354388 30% /target
df: /dev/sda1 240972 29441 199090 13% /target/boot
df: /dev/sda6 4709920 9640 4437984 0% /target/home
df: /dev/sda2 2065152 586144 1354388 30% /dev/.static/dev
df: devtmpfs 253472 0 253472 0% /target/dev
free: total used free shared buffers
free: Mem: 513932 404520 109412 47696 35908
free: -/+ buffers: 368612 145320
free: Swap: 231420 11008 220412
/proc/cmdline: console=ttyS0,115200n8
base-installer/initramfs-tools/driver-policy=most
/proc/cpuinfo: processor : 0
/proc/cpuinfo: model name : Feroceon 88FR131 rev 1 (v5l)
/proc/cpuinfo: BogoMIPS : 1185.79
/proc/cpuinfo: Features : swp half thumb fastmult edsp
/proc/cpuinfo: CPU implementer : 0x56
/proc/cpuinfo: CPU architecture: 5TE
/proc/cpuinfo: CPU variant : 0x2
/proc/cpuinfo: CPU part : 0x131
/proc/cpuinfo: CPU revision : 1
/proc/cpuinfo:
/proc/cpuinfo: Hardware : Marvell Kirkwood (Flattened Device Tree)
/proc/cpuinfo: Revision : 0000
/proc/cpuinfo: Serial : 0000000000000000
/proc/device-tree/model: Globalscale Technologies SheevaPlug/proc/iomem:
00000000-1fffffff : System RAM
/proc/iomem: 00008000-0050438b : Kernel code
/proc/iomem: 00548000-005e312b : Kernel data
/proc/iomem: f1001418-f100141b : kirkwood_cpuidle
/proc/iomem: f1001418-f100141b : kirkwood_cpuidle
/proc/iomem: f1010000-f101001f : /ocp@f1000000/pin-controller@10000
/proc/iomem: f1010100-f101013f : /ocp@f1000000/gpio@10100
/proc/iomem: f1010140-f101017f : /ocp@f1000000/gpio@10140
/proc/iomem: f1010300-f101031f : /ocp@f1000000/rtc@10300
/proc/iomem: f1012000-f10120ff : serial
/proc/iomem: f1020104-f1020107 : kirkwood-cpufreq
/proc/iomem: f1020104-f1020107 : kirkwood-cpufreq
/proc/iomem: f1020110-f1020117 : bridge-interrupt-ctrl
/proc/iomem: f1020200-f102020f : main-interrupt-ctrl
/proc/iomem: f1020210-f102021f : main-interrupt-ctrl
/proc/iomem: f1050000-f1050fff : /ocp@f1000000/ehci@50000
/proc/iomem: f1082000-f1082333 : /ocp@f1000000/sata-phy@82000
/proc/iomem: f1084000-f1084333 : /ocp@f1000000/sata-phy@84000
/proc/iomem: f1090000-f10901ff : /ocp@f1000000/mvsdio@90000
/proc/iomem: f4000000-f40003ff : /mbus/nand@012f
/proc/interrupts: CPU0
/proc/interrupts: 17: 469514 bridge-interrupt-ctrl 2 Edge
orion_event
/proc/interrupts: 26: 4051 main-interrupt-ctrl 33 Edge serial
/proc/interrupts: 29: 280988 main-interrupt-ctrl 19 Edge
ehci_hcd:usb1
/proc/interrupts: 30: 57816 main-interrupt-ctrl 46 Edge
f1072004.mdio-bus
/proc/interrupts: 31: 1 main-interrupt-ctrl 53 Edge
f1010300.rtc
/proc/interrupts: 32: 10031 main-interrupt-ctrl 28 Edge mvsdio
/proc/interrupts: 83: 2 main-interrupt-ctrl 5 Edge
f1060800.xor
/proc/interrupts: 84: 2 main-interrupt-ctrl 7 Edge
f1060900.xor
/proc/interrupts: 85: 135572 main-interrupt-ctrl 11 Edge eth0
/proc/interrupts: Err: 0
/proc/meminfo: MemTotal: 513932 kB
/proc/meminfo: MemFree: 109412 kB
/proc/meminfo: MemAvailable: 380800 kB
/proc/meminfo: Buffers: 35908 kB
/proc/meminfo: Cached: 266156 kB
/proc/meminfo: SwapCached: 2924 kB
/proc/meminfo: Active: 144332 kB
/proc/meminfo: Inactive: 218020 kB
/proc/meminfo: Active(anon): 13608 kB
/proc/meminfo: Inactive(anon): 94376 kB
/proc/meminfo: Active(file): 130724 kB
/proc/meminfo: Inactive(file): 123644 kB
/proc/meminfo: Unevictable: 0 kB
/proc/meminfo: Mlocked: 0 kB
/proc/meminfo: HighTotal: 0 kB
/proc/meminfo: HighFree: 0 kB
/proc/meminfo: LowTotal: 513932 kB
/proc/meminfo: LowFree: 109412 kB
/proc/meminfo: SwapTotal: 231420 kB
/proc/meminfo: SwapFree: 220412 kB
/proc/meminfo: Dirty: 636 kB
/proc/meminfo: Writeback: 0 kB
/proc/meminfo: AnonPages: 57408 kB
/proc/meminfo: Mapped: 4824 kB
/proc/meminfo: Shmem: 47696 kB
/proc/meminfo: Slab: 32488 kB
/proc/meminfo: SReclaimable: 28528 kB
/proc/meminfo: SUnreclaim: 3960 kB
/proc/meminfo: KernelStack: 688 kB
/proc/meminfo: PageTables: 864 kB
/proc/meminfo: NFS_Unstable: 0 kB
/proc/meminfo: Bounce: 0 kB
/proc/meminfo: WritebackTmp: 0 kB
/proc/meminfo: CommitLimit: 488384 kB
/proc/meminfo: Committed_AS: 126444 kB
/proc/meminfo: VmallocTotal: 499712 kB
/proc/meminfo: VmallocUsed: 6000 kB
/proc/meminfo: VmallocChunk: 487428 kB
-- System Information:
Debian Release: stretch/sid
APT prefers unstable
APT policy: (500, 'unstable'), (500, 'testing')
Architecture: armel (armv5tel)
Kernel: Linux 4.3.0-1-kirkwood
Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
