On Fri, Dec 11, 2015 at 7:37 AM, Martin Michlmayr <t...@cyrius.com> wrote: > Hi Tim, > > I just found your installation report from 2013 regarding Buffalo > Linkstation HS-DSGL that unfortunately nobody responded to,
Thanks for CC me on Linkstation stuff. Unfortunately, I don't have HS-DSGL, either. I googled and found it's Linkstation Live variant, which is orion5x. > So if I understand you correctly, the config-debian script gives an > error. It checks whether sda1 or md0 are ext2 or ext3 filesystem. > But if I understand correctly, this is no longer called sda1 or md0 on > newer firmware versions but /dev/disk1-1something. So maybe in > addition to sda1 and md0, we should also accept disk1-1. I have a LS-WTGL which orion5x, but it has been installed Debian for years. I don't have original firmware on it any more. So I googled again, and found there're a few device name used, not sure which is old or new: - /dev/disk1_1 [0] - /dev/ls_disk1_1 [1] So Martin, you're going to include all possible device name into config-debian script? If so, I'll try to confirm it on orion5x stock firmware, hopefully within this month. Cheers, Roger [0] http://www.yamasita.jp/linkstation/2007/03/070303_core_dump.html [1] http://www.yamasita.jp/linkstation/0608/060805.html
