Your message dated Tue, 14 Apr 2015 14:18:02 +0200
with message-id <20150414141802.6eae45d7@s5.lokal>
and subject line done
has caused the Debian Bug report #751000,
regarding Please enable installation in VortualBox
to be marked as done.
This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.
(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact ow...@bugs.debian.org
immediately.)
--
751000: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=751000
Debian Bug Tracking System
Contact ow...@bugs.debian.org with problems
--- Begin Message ---
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Package: installation-reports
Version: 2.55
Severity: minor
Dear Maintainer,
*** Reporter, please consider answering these questions, where appropriate ***
* What led up to the situation?
* What exactly did you do (or not do) that was effective (or
ineffective)?
* What was the outcome of this action?
* What outcome did you expect instead?
*** End of the template - remove these template lines ***
- -- Package-specific info:
Boot method: ISO-image
Image version:
http://gensho.acc.umu.se/cdimage/weekly-builds/amd64/iso-cd/debian-testing-amd64-netinst.iso,
2014-06-02 Date: 2014-06-08, about 15.00 h to 17.00 h
Machine: virt-manager KVM guest
Partitions:
Filesystem Type 1K-blocks Used Available Use% Mounted on
/dev/vda1 ext4 19620732 1301112 17299872 7% /
udev devtmpfs 10240 0 10240 0% /dev
tmpfs tmpfs 102496 224 102272 1% /run
tmpfs tmpfs 5120 0 5120 0% /run/lock
tmpfs tmpfs 385200 0 385200 0% /run/shm
none tmpfs 4 0 4 0% /sys/fs/cgroup
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot: [o]
Detect network card: [o]
Configure network: [o]
Detect CD: [o]
Load installer modules: [o]
Clock/timezone setup: [o]
User/password setup: [o]
Detect hard drives: [o]
Partition hard drives: [o]
Install base system: [o]
Install tasks: [o]
Install boot loader: [o]
Overall install: [o]
Comments/Problems:
First I tried to set up an installation of Jessie/testing in Virtualbox, which
was not
workable at all, although I tried the version from Backports. First it seemed
to work in
EFI-mode, but installation hung, when trying to partition the harddisk, without
EFI it is
not workable at all, regardless of hardware-settings and chipsets. So the still
experimental virt-manager in Wheezy was tried out, with backported libvirt,
mostly with
default settings, see attached [Jessie-tst.xml.xz]. Having a raw
virtio-harddisk-image on
an LZO-compressed BTRFS-partition works without any trouble, but it produces
slightly
increased CPU-load on the host system during HD-access inside the guest.
Installing the
base-system and print-server only took about two hours, currntly, task-desktop
and
task-xfce-desktop are being installed. I am going to try out e few things in
the virtual
environment and use it for development.
There was a problem with virt-manager.
When trying to restart the installation today, there was an error-message from
virt-manager:
- ---
Error starting domain: internal error Network 'default' is not active.
Traceback (most recent call last):
File "/usr/share/virt-manager/virtManager/asyncjob.py", line 45, in cb_wrapper
callback(asyncjob, *args, **kwargs)
File "/usr/share/virt-manager/virtManager/asyncjob.py", line 66, in tmpcb
callback(*args, **kwargs)
File "/usr/share/virt-manager/virtManager/domain.py", line 1114, in startup
self._backend.create()
File "/usr/lib/python2.7/dist-packages/libvirt.py", line 620, in create
if ret == -1: raise libvirtError ('virDomainCreate() failed', dom=self)
libvirtError: internal error Network 'default' is not active.
- ---
The workaround there is to create a new VM, so networking is restarted for the
existing
ones as well.
I also tried copying /etc/libvirt/qemu/networks/default.xml
to /etc/libvirt/qemu/networks/autostart/ in analogy to the storage-section,
possibly this
works, I am going to see upon the next restart. virsh does not see the running
VM from
virt-manager.
- --
Please make sure that the hardware-summary log file, and any other
installation logs that you think would be useful are attached to this
report. Please compress large files using gzip.
Once you have filled out this report, mail it to sub...@bugs.debian.org.
==============================================
Installer lsb-release:
==============================================
DISTRIB_ID=Debian
DISTRIB_DESCRIPTION="Debian GNU/Linux installer"
DISTRIB_RELEASE="8 (jessie) - installer build 20140602-00:06"
X_INSTALLATION_MEDIUM=cdrom
==============================================
Installer hardware-summary:
==============================================
uname -a: Linux jessie-tst 3.14-1-amd64 #1 SMP Debian 3.14.4-1 (2014-05-13)
x86_64
GNU/Linux lspci -knn: 00:00.0 Host bridge [0600]: Intel Corporation 440FX -
82441FX PMC
[Natoma] [8086:1237] (rev 02) lspci -knn: Subsystem: Red Hat, Inc Device
[1af4:1100] lspci -knn: 00:01.0 ISA bridge [0601]: Intel Corporation 82371SB
PIIX3 ISA
[Natoma/Triton II] [8086:7000] lspci -knn: Subsystem: Red Hat, Inc Device
[1af4:1100] lspci -knn: 00:01.1 IDE interface [0101]: Intel Corporation 82371SB
PIIX3 IDE
[Natoma/Triton II] [8086:7010] lspci -knn: Subsystem: Red Hat, Inc Device
[1af4:1100] lspci -knn: Kernel driver in use: ata_piix
lspci -knn: 00:01.2 USB controller [0c03]: Intel Corporation 82371SB PIIX3 USB
[Natoma/Triton II] [8086:7020] (rev 01) lspci -knn: Subsystem: Red Hat, Inc
Device [1af4:1100] lspci -knn: Kernel driver in use: uhci_hcd
lspci -knn: 00:01.3 Bridge [0680]: Intel Corporation 82371AB/EB/MB PIIX4 ACPI
[8086:7113]
(rev 03) lspci -knn: Subsystem: Red Hat, Inc Device [1af4:1100]
lspci -knn: 00:02.0 VGA compatible controller [0300]: Cirrus Logic GD 5446
[1013:00b8]
lspci -knn: Subsystem: Red Hat, Inc Device [1af4:1100]
lspci -knn: 00:03.0 Ethernet controller [0200]: Red Hat, Inc Virtio network
device
[1af4:1000] lspci -knn: Subsystem: Red Hat, Inc Device [1af4:0001]
lspci -knn: Kernel driver in use: virtio-pci
lspci -knn: 00:04.0 Audio device [0403]: Intel Corporation
82801FB/FBM/FR/FW/FRW (ICH6
Family) High Definition Audio Controller [8086:2668] (rev 01) lspci -knn:
Subsystem: Red Hat, Inc Device [1af4:1100] lspci -knn: 00:05.0 SCSI storage
controller
[0100]: Red Hat, Inc Virtio block device [1af4:1001] lspci -knn:
Subsystem: Red
Hat, Inc Device [1af4:0002] lspci -knn: Kernel driver in use: virtio-pci
lspci -knn: 00:06.0 Unclassified device [00ff]: Red Hat, Inc Virtio memory
balloon
[1af4:1002] lspci -knn: Subsystem: Red Hat, Inc Device [1af4:0005]
lspci -knn: Kernel driver in use: virtio-pci
usb-list:
usb-list: Bus 01 Device 01: UHCI Host Controller [1d6b:0001]
usb-list: Level 00 Parent 00 Port 00 Class 09(hub ) Subclass 00 Protocol 00
usb-list: Manufacturer: Linux 3.14-1-amd64 uhci_hcd
usb-list: Interface 00: Class 09(hub ) Subclass 00 Protocol 00 Driver hub
usb-list:
usb-list: Bus 01 Device 02: QEMU USB Tablet [0627:0001]
usb-list: Level 01 Parent 01 Port 00 Class 00(>ifc ) Subclass 00 Protocol 00
usb-list: Manufacturer: QEMU 1.1.2
usb-list: Interface 00: Class 03(HID ) Subclass 00 Protocol 02 Driver usbhid
lsmod: Module Size Used by
lsmod: ufs 73486 0
lsmod: qnx4 13036 0
lsmod: hfsplus 93258 0
lsmod: hfs 49749 0
lsmod: minix 31387 0
lsmod: msdos 17046 0
lsmod: fuse 78839 0
lsmod: ntfs 194605 0
lsmod: usblp 17274 0
lsmod: battery 13101 0
lsmod: dm_mod 89276 0
lsmod: md_mod 103628 0
lsmod: xfs 770671 0
lsmod: libcrc32c 12426 1 xfs
lsmod: jfs 164667 0
lsmod: crc32c 12656 2
lsmod: btrfs 814786 0
lsmod: xor 21040 1 btrfs
lsmod: raid6_pq 95238 1 btrfs
lsmod: vfat 17135 0
lsmod: fat 53794 2 vfat,msdos
lsmod: ext4 473514 1
lsmod: crc16 12343 1 ext4
lsmod: mbcache 13082 1 ext4
lsmod: jbd2 82560 1 ext4
lsmod: virtio_blk 17341 3
lsmod: virtio_balloon 13047 0
lsmod: virtio_net 26553 0
lsmod: virtio_pci 17389 0
lsmod: virtio_ring 17469 4
virtio_blk,virtio_net,virtio_pci,virtio_balloon
lsmod: virtio 13058 4
virtio_blk,virtio_net,virtio_pci,virtio_balloon
lsmod: nls_utf8 12456 0
lsmod: isofs 38963 0
lsmod: usb_storage 52036 0
lsmod: vga16fb 21210 0
lsmod: vgastate 16521 1 vga16fb
lsmod: hid_generic 12393 0
lsmod: usbhid 44439 0
lsmod: hid 94034 2 hid_generic,usbhid
lsmod: thermal 17468 0
lsmod: fan 12681 0
lsmod: thermal_sys 27642 2 fan,thermal
lsmod: sr_mod 21898 0
lsmod: cdrom 39232 1 sr_mod
lsmod: ata_generic 12490 0
lsmod: ata_piix 33592 0
lsmod: libata 168945 2 ata_generic,ata_piix
lsmod: scsi_mod 182977 3 usb_storage,libata,sr_mod
lsmod: uhci_hcd 30843 0
lsmod: ehci_hcd 48510 0
lsmod: usbcore 158411 5
usblp,uhci_hcd,usb_storage,ehci_hcd,usbhid
lsmod: usb_common 12440 1 usbcore
df: Filesystem 1K-blocks Used Available Use% Mounted on
df: none 102496 56 102440 0% /run
df: devtmpfs 508208 0 508208 0% /dev
df: /dev/vda1 19620732 1228656 17372328 7% /target
df: /dev/vda1 19620732 1228656 17372328 7% /dev/.static/dev
df: devtmpfs 508208 0 508208 0% /target/dev
free: total used free shared buffers
free: Mem: 1024928 786144 238784 0 75280
free: -/+ buffers: 710864 314064
free: Swap: 901116 568 900548
/proc/cmdline: BOOT_IMAGE=/install.amd/vmlinuz vga=788
initrd=/install.amd/initrd.gz --
quiet /proc/cpuinfo: processor : 0
/proc/cpuinfo: vendor_id : AuthenticAMD
/proc/cpuinfo: cpu family : 6
/proc/cpuinfo: model : 2
/proc/cpuinfo: model name : QEMU Virtual CPU version 1.1.2
/proc/cpuinfo: stepping : 3
/proc/cpuinfo: microcode : 0x1000065
/proc/cpuinfo: cpu MHz : 2994.552
/proc/cpuinfo: cache size : 512 KB
/proc/cpuinfo: physical id : 0
/proc/cpuinfo: siblings : 1
/proc/cpuinfo: core id : 0
/proc/cpuinfo: cpu cores : 1
/proc/cpuinfo: apicid : 0
/proc/cpuinfo: initial apicid : 0
/proc/cpuinfo: fpu : yes
/proc/cpuinfo: fpu_exception : yes
/proc/cpuinfo: cpuid level : 4
/proc/cpuinfo: wp : yes
/proc/cpuinfo: flags : fpu de pse tsc msr pae mce cx8 apic sep mtrr
pge
mca cmov pat pse36 clflush mmx fxsr sse sse2 syscall nx lm nopl pni cx16 popcnt
hypervisor lahf_lm svm abm sse4a /proc/cpuinfo: bogomips : 5989.10
/proc/cpuinfo:
TLB size : 1024 4K pages /proc/cpuinfo: clflush size : 64
/proc/cpuinfo: cache_alignment : 64
/proc/cpuinfo: address sizes : 40 bits physical, 48 bits virtual
/proc/cpuinfo: power management:
/proc/cpuinfo:
/proc/cpuinfo: processor : 1
/proc/cpuinfo: vendor_id : AuthenticAMD
/proc/cpuinfo: cpu family : 6
/proc/cpuinfo: model : 2
/proc/cpuinfo: model name : QEMU Virtual CPU version 1.1.2
/proc/cpuinfo: stepping : 3
/proc/cpuinfo: microcode : 0x1000065
/proc/cpuinfo: cpu MHz : 2994.552
/proc/cpuinfo: cache size : 512 KB
/proc/cpuinfo: physical id : 1
/proc/cpuinfo: siblings : 1
/proc/cpuinfo: core id : 0
/proc/cpuinfo: cpu cores : 1
/proc/cpuinfo: apicid : 1
/proc/cpuinfo: initial apicid : 1
/proc/cpuinfo: fpu : yes
/proc/cpuinfo: fpu_exception : yes
/proc/cpuinfo: cpuid level : 4
/proc/cpuinfo: wp : yes
/proc/cpuinfo: flags : fpu de pse tsc msr pae mce cx8 apic sep mtrr
pge
mca cmov pat pse36 clflush mmx fxsr sse sse2 syscall nx lm nopl pni cx16 popcnt
hypervisor lahf_lm svm abm sse4a /proc/cpuinfo: bogomips : 5989.10
/proc/cpuinfo:
TLB size : 1024 4K pages /proc/cpuinfo: clflush size : 64
/proc/cpuinfo: cache_alignment : 64
/proc/cpuinfo: address sizes : 40 bits physical, 48 bits virtual
/proc/cpuinfo: power management:
/proc/cpuinfo:
/proc/ioports: 0000-001f : dma1
/proc/ioports: 0020-0021 : pic1
/proc/ioports: 0040-0043 : timer0
/proc/ioports: 0050-0053 : timer1
/proc/ioports: 0060-0060 : keyboard
/proc/ioports: 0064-0064 : keyboard
/proc/ioports: 0070-0071 : rtc0
/proc/ioports: 0080-008f : dma page reg
/proc/ioports: 00a0-00a1 : pic2
/proc/ioports: 00c0-00df : dma2
/proc/ioports: 00f0-00ff : fpu
/proc/ioports: 0170-0177 : 0000:00:01.1
/proc/ioports: 0170-0177 : ata_piix
/proc/ioports: 01f0-01f7 : 0000:00:01.1
/proc/ioports: 01f0-01f7 : ata_piix
/proc/ioports: 0376-0376 : 0000:00:01.1
/proc/ioports: 0376-0376 : ata_piix
/proc/ioports: 03f6-03f6 : 0000:00:01.1
/proc/ioports: 03f6-03f6 : ata_piix
/proc/ioports: 03f8-03ff : serial
/proc/ioports: 0cf8-0cff : PCI conf1
/proc/ioports: afe0-afe3 : ACPI GPE0_BLK
/proc/ioports: b000-b03f : 0000:00:01.3
/proc/ioports: b000-b003 : ACPI PM1a_EVT_BLK
/proc/ioports: b004-b005 : ACPI PM1a_CNT_BLK
/proc/ioports: b008-b00b : ACPI PM_TMR
/proc/ioports: b010-b015 : ACPI CPU throttle
/proc/ioports: b100-b10f : 0000:00:01.3
/proc/ioports: c000-c03f : 0000:00:05.0
/proc/ioports: c000-c03f : virtio-pci
/proc/ioports: c040-c05f : 0000:00:01.2
/proc/ioports: c040-c05f : uhci_hcd
/proc/ioports: c060-c07f : 0000:00:03.0
/proc/ioports: c060-c07f : virtio-pci
/proc/ioports: c080-c09f : 0000:00:06.0
/proc/ioports: c080-c09f : virtio-pci
/proc/ioports: c0a0-c0af : 0000:00:01.1
/proc/ioports: c0a0-c0af : ata_piix
/proc/iomem: 00000000-00000fff : reserved
/proc/iomem: 00001000-0009dbff : System RAM
/proc/iomem: 0009dc00-0009ffff : reserved
/proc/iomem: 000c0000-000c8dff : Video ROM
/proc/iomem: 000c9000-000c99ff : Adapter ROM
/proc/iomem: 000ca000-000cc3ff : Adapter ROM
/proc/iomem: 000f0000-000fffff : reserved
/proc/iomem: 000f0000-000fffff : System ROM
/proc/iomem: 00100000-3fffdfff : System RAM
/proc/iomem: 01000000-014cb72c : Kernel code
/proc/iomem: 014cb72d-018b02bf : Kernel data
/proc/iomem: 019b2000-01aa1fff : Kernel bss
/proc/iomem: 3fffe000-3fffffff : reserved
/proc/iomem: fc000000-fdffffff : 0000:00:02.0
/proc/iomem: fc000000-fc0eafff : BOOTFB
/proc/iomem: febd0000-febdffff : 0000:00:02.0
/proc/iomem: febe0000-febeffff : 0000:00:03.0
/proc/iomem: febf0000-febf3fff : 0000:00:04.0
/proc/iomem: febf4000-febf4fff : 0000:00:02.0
/proc/iomem: febf5000-febf5fff : 0000:00:03.0
/proc/iomem: febf5000-febf5fff : virtio-pci
/proc/iomem: febf6000-febf6fff : 0000:00:05.0
/proc/iomem: febf6000-febf6fff : virtio-pci
/proc/iomem: fec00000-fec003ff : IOAPIC 0
/proc/iomem: fed00000-fed003ff : HPET 0
/proc/iomem: fee00000-fee00fff : Local APIC
/proc/iomem: feffc000-feffffff : reserved
/proc/iomem: fffc0000-ffffffff : reserved
/proc/interrupts: CPU0 CPU1
/proc/interrupts: 0: 30 0 IO-APIC-edge timer
/proc/interrupts: 1: 342 344 IO-APIC-edge i8042
/proc/interrupts: 8: 19 20 IO-APIC-edge rtc0
/proc/interrupts: 9: 0 0 IO-APIC-fasteoi acpi
/proc/interrupts: 11: 11 10 IO-APIC-fasteoi uhci_hcd:usb1,
virtio2
/proc/interrupts: 12: 0 3 IO-APIC-edge i8042
/proc/interrupts: 14: 0 0 IO-APIC-edge ata_piix
/proc/interrupts: 15: 3510 3465 IO-APIC-edge ata_piix
/proc/interrupts: 40: 0 0 PCI-MSI-edge virtio0-config
/proc/interrupts: 41: 44068 44086 PCI-MSI-edge virtio0-input.0
/proc/interrupts: 42: 0 1 PCI-MSI-edge
virtio0-output.0
/proc/interrupts: 43: 0 0 PCI-MSI-edge virtio1-config
/proc/interrupts: 44: 31171 31161 PCI-MSI-edge
virtio1-requests
/proc/interrupts: NMI: 0 0 Non-maskable interrupts
/proc/interrupts: LOC: 2682558 2671013 Local timer interrupts
/proc/interrupts: SPU: 0 0 Spurious interrupts
/proc/interrupts: PMI: 0 0 Performance monitoring interrupts
/proc/interrupts: IWI: 24733 24607 IRQ work interrupts
/proc/interrupts: RTR: 0 0 APIC ICR read retries
/proc/interrupts: RES: 105075 110583 Rescheduling interrupts
/proc/interrupts: CAL: 1268 977 Function call interrupts
/proc/interrupts: TLB: 11793 13742 TLB shootdowns
/proc/interrupts: TRM: 0 0 Thermal event interrupts
/proc/interrupts: THR: 0 0 Threshold APIC interrupts
/proc/interrupts: MCE: 0 0 Machine check exceptions
/proc/interrupts: MCP: 20 20 Machine check polls
/proc/interrupts: ERR: 0
/proc/interrupts: MIS: 0
/proc/meminfo: MemTotal: 1024928 kB
/proc/meminfo: MemFree: 238784 kB
/proc/meminfo: MemAvailable: 721100 kB
/proc/meminfo: Buffers: 75280 kB
/proc/meminfo: Cached: 572672 kB
/proc/meminfo: SwapCached: 64 kB
/proc/meminfo: Active: 262660 kB
/proc/meminfo: Inactive: 410728 kB
/proc/meminfo: Active(anon): 24644 kB
/proc/meminfo: Inactive(anon): 96636 kB
/proc/meminfo: Active(file): 238016 kB
/proc/meminfo: Inactive(file): 314092 kB
/proc/meminfo: Unevictable: 0 kB
/proc/meminfo: Mlocked: 0 kB
/proc/meminfo: SwapTotal: 901116 kB
/proc/meminfo: SwapFree: 900548 kB
/proc/meminfo: Dirty: 864 kB
/proc/meminfo: Writeback: 0 kB
/proc/meminfo: AnonPages: 25360 kB
/proc/meminfo: Mapped: 2476 kB
/proc/meminfo: Shmem: 95888 kB
/proc/meminfo: Slab: 96564 kB
/proc/meminfo: SReclaimable: 85664 kB
/proc/meminfo: SUnreclaim: 10900 kB
/proc/meminfo: KernelStack: 712 kB
/proc/meminfo: PageTables: 696 kB
/proc/meminfo: NFS_Unstable: 0 kB
/proc/meminfo: Bounce: 0 kB
/proc/meminfo: WritebackTmp: 0 kB
/proc/meminfo: CommitLimit: 1413580 kB
/proc/meminfo: Committed_AS: 126332 kB
/proc/meminfo: VmallocTotal: 34359738367 kB
/proc/meminfo: VmallocUsed: 9000 kB
/proc/meminfo: VmallocChunk: 34359729335 kB
/proc/meminfo: HardwareCorrupted: 0 kB
/proc/meminfo: AnonHugePages: 0 kB
/proc/meminfo: HugePages_Total: 0
/proc/meminfo: HugePages_Free: 0
/proc/meminfo: HugePages_Rsvd: 0
/proc/meminfo: HugePages_Surp: 0
/proc/meminfo: Hugepagesize: 2048 kB
/proc/meminfo: DirectMap4k: 40952 kB
/proc/meminfo: DirectMap2M: 1007616 kB
/proc/bus/input/devices: I: Bus=0011 Vendor=0001 Product=0001 Version=ab41
/proc/bus/input/devices: N: Name="AT Translated Set 2 keyboard"
/proc/bus/input/devices: P: Phys=isa0060/serio0/input0
/proc/bus/input/devices: S: Sysfs=/devices/platform/i8042/serio0/input/input0
/proc/bus/input/devices: U: Uniq=
/proc/bus/input/devices: H: Handlers=sysrq kbd
/proc/bus/input/devices: B: PROP=0
/proc/bus/input/devices: B: EV=120013
/proc/bus/input/devices: B: KEY=402000000 3803078f800d001 feffffdfffefffff
fffffffffffffffe /proc/bus/input/devices: B: MSC=10
/proc/bus/input/devices: B: LED=7
/proc/bus/input/devices:
/proc/bus/input/devices: I: Bus=0003 Vendor=0627 Product=0001 Version=0001
/proc/bus/input/devices: N: Name="QEMU 1.1.2 QEMU USB Tablet"
/proc/bus/input/devices: P: Phys=usb-0000:00:01.2-1/input0
/proc/bus/input/devices: S:
Sysfs=/devices/pci0000:00/0000:00:01.2/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input2
/proc/bus/input/devices:
U: Uniq=42 /proc/bus/input/devices: H: Handlers=mouse0
/proc/bus/input/devices: B: PROP=0
/proc/bus/input/devices: B: EV=1f
/proc/bus/input/devices: B: KEY=70000 0 0 0 0
/proc/bus/input/devices: B: REL=100
/proc/bus/input/devices: B: ABS=3
/proc/bus/input/devices: B: MSC=10
/proc/bus/input/devices:
- -- System Information:
Debian Release: jessie/sid
APT prefers testing-updates
APT policy: (500, 'testing-updates'), (500, 'testing')
Architecture: amd64 (x86_64)
Kernel: Linux 3.14-1-amd64 (SMP w/2 CPU cores)
Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
installation-report depends on no packages.
Versions of packages installation-report recommends:
ii pciutils 1:3.2.1-2
ii reportbug 6.5.0
installation-report suggests no packages.
- -- no debconf information
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)
iEYEARECAAYFAlOVl4gACgkQ5+rBHyUt5ws7DACgmIfpf878cSb1I0Czg5/hshHm
FJgAoIAmZDFVI7HwtKpTiaipIPZfdcZo
=tXsN
-----END PGP SIGNATURE-----
Jessie-tst.xml.xz
Description: application/xz
--- End Message ---
--- Begin Message ---
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
I just retried installation of Jessie-RC in Virtualbox and this works now
without EFI.
This is sufficient for me to close the issue.
Installation in UEFI-mode was very basic, in text-mode in the EFI-shell.
In the end I was dropped to the EFI-shell, it did not boot up. This might be
due to wrong
software-selection, i.e. I selected 'Desktop' only, without standard-system
utilities.
It does not make much sense however anyway, to run the PC in legacy-mode, or
have an
older, non-UEFI-PC, but use (U)EFI inside Virtualbox.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iEYEARECAAYFAlUtBYMACgkQ5+rBHyUt5wuvaACgpjb1w8Hjkq6DEI4NINFaH7yb
fl0AoK8/uNcoz+LxgWCqSuFovuOkA8Ec
=ERkp
-----END PGP SIGNATURE-----
--- End Message ---
