Package: installation-reports Severity: important Tags: d-i Dear Maintainer,
what I've done so far : wget http://d-i.debian.org/daily-images/armhf/daily/netboot/SD-card- images/partition.img.gz wget http://d-i.debian.org/daily-images/armhf/daily/netboot/SD-card- images/firmware.BeagleBoneBlack.img.gz zcat firmware.BeagleBoneBlack.img.gz partition.img.gz > complet_image.img dd if=complet_image.img of=/dev/mmcblk0 and boot on the bbb with that sd (I erased the internal emmc before) Here is the console log : U-Boot SPL 2014.10+dfsg1-5 (Apr 07 2015 - 22:13:27) MMC: block number 0x100 exceeds max(0x0) MMC: block number 0x200 exceeds max(0x0) *** Error - No Valid Environment Area found Using default environment U-Boot 2014.10+dfsg1-5 (Apr 07 2015 - 22:13:27) Watchdog enabled I2C: ready DRAM: 512 MiB MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1 Using default environment Net: <ethaddr> not set. Validating first E-fuse MAC cpsw, usb_ether Hit any key to stop autoboot: 0 switch to partitions #0, OK mmc0 is current device SD/MMC found on device 0 ** Invalid partition 2 ** ** Invalid partition 2 ** ** Invalid partition 2 ** ** Invalid partition 2 ** ** Invalid partition 2 ** switch to partitions #0, OK mmc0 is current device SD/MMC found on device 0 reading /boot/boot.scr 1451 bytes read in 9 ms (157.2 KiB/s) Running bootscript from mmc ... ## Executing script at 82000000 Non-mainline u-boot or old-style mainline u-boot detected. This boot script uses the unified bootcmd handling of mainline u-boot >=v2014.10, which is not available on your system. Please boot the installer manually. switch to partitions #0, OK mmc1(part 0) is current device SD/MMC found on device 1 ** No partition table - mmc 1 ** ** No partition table - mmc 1 ** ** No partition table - mmc 1 ** ** No partition table - mmc 1 ** ** No partition table - mmc 1 ** switch to partitions #0, OK mmc1(part 0) is current device SD/MMC found on device 1 ** No partition table - mmc 1 ** ** No partition table - mmc 1 ** ** No partition table - mmc 1 ** ** No partition table - mmc 1 ** ** No partition table - mmc 1 ** ## Error: "nandboot" not defined U-Boot# Thanks -- Package-specific info: Boot method: sd-card Image version: http://d-i.debian.org/daily-images/armhf/daily/netboot/SD-card-images/ Date: <Date and time of the install> Machine: Beaglebone black Partitions: <df -Tl will do; the raw partition table is preferred> Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot: [ ] Detect network card: [ ] Configure network: [ ] Detect CD: [ ] Load installer modules: [ ] Clock/timezone setup: [ ] User/password setup: [ ] Detect hard drives: [ ] Partition hard drives: [ ] Install base system: [ ] Install tasks: [ ] Install boot loader: [ ] Overall install: [ ] Comments/Problems: <Description of the install, in prose, and any thoughts, comments and ideas you had during the initial install.> -- Please make sure that the hardware-summary log file, and any other installation logs that you think would be useful are attached to this report. Please compress large files using gzip. Once you have filled out this report, mail it to sub...@bugs.debian.org. -- System Information: Debian Release: 8.0 APT prefers unstable APT policy: (500, 'unstable') Architecture: amd64 (x86_64) Foreign Architectures: i386, armel, armhf, powerpcspe Kernel: Linux 3.16.0-4-amd64 (SMP w/2 CPU cores) Locale: LANG=fr_FR.utf8, LC_CTYPE=fr_FR.utf8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Init: systemd (via /run/systemd/system) -- To UNSUBSCRIBE, email to debian-boot-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org Archive: https://lists.debian.org/20150414112415.8884.57824.report...@graves.miradou.com
