Package: installation-reports Boot method: USB-Stick Image version: Self-made USB-Stick with Installer from wheezy 2012-09-05 Date: 2012-09-14
Machine: Acer Aspire One D150 Processor: Intel Atom N270 @ 1,6GHz Memory: 1,0GB Partitions: > Dateisystem Typ 1K-Blöcke > Benutzt Verfügbar Verw% Eingehängt auf > rootfs rootfs 14598116 > 5164032 8701668 38% / > udev devtmpfs 10240 > 0 10240 0% /dev > tmpfs tmpfs 102452 > 332 102120 1% /run > /dev/disk/by-uuid/268df80a-8739-4d83-abcc-f45437eb3897 ext4 14598116 > 5164032 8701668 38% / > tmpfs tmpfs 5120 > 0 5120 0% /run/lock > tmpfs tmpfs 595240 > 0 595240 0% /run/shm > /dev/sda7 ext4 91296360 > 1478592 85245560 2% /home Output of lspci -knn: > 00:00.0 Host bridge [0600]: Intel Corporation Mobile 945GSE Express Memory > Controller Hub [8086:27ac] (rev 03) > Subsystem: Acer Incorporated [ALI] Device [1025:019c] > Kernel driver in use: agpgart-intel > 00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 945GSE > Express Integrated Graphics Controller [8086:27ae] (rev 03) > Subsystem: Acer Incorporated [ALI] Device [1025:019c] > Kernel driver in use: i915 > 00:02.1 Display controller [0380]: Intel Corporation Mobile 945GM/GMS/GME, > 943/940GML Express Integrated Graphics Controller [8086:27a6] (rev 03) > Subsystem: Acer Incorporated [ALI] Device [1025:019c] > 00:1b.0 Audio device [0403]: Intel Corporation N10/ICH 7 Family High > Definition Audio Controller [8086:27d8] (rev 02) > Subsystem: Acer Incorporated [ALI] Device [1025:019c] > Kernel driver in use: snd_hda_intel > 00:1c.0 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express > Port 1 [8086:27d0] (rev 02) > Kernel driver in use: pcieport > 00:1c.1 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express > Port 2 [8086:27d2] (rev 02) > Kernel driver in use: pcieport > 00:1c.2 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express > Port 3 [8086:27d4] (rev 02) > Kernel driver in use: pcieport > 00:1d.0 USB controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI > Controller #1 [8086:27c8] (rev 02) > Subsystem: Acer Incorporated [ALI] Device [1025:019c] > Kernel driver in use: uhci_hcd > 00:1d.1 USB controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI > Controller #2 [8086:27c9] (rev 02) > Subsystem: Acer Incorporated [ALI] Device [1025:019c] > Kernel driver in use: uhci_hcd > 00:1d.2 USB controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI > Controller #3 [8086:27ca] (rev 02) > Subsystem: Acer Incorporated [ALI] Device [1025:019c] > Kernel driver in use: uhci_hcd > 00:1d.3 USB controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI > Controller #4 [8086:27cb] (rev 02) > Subsystem: Acer Incorporated [ALI] Device [1025:019c] > Kernel driver in use: uhci_hcd > 00:1d.7 USB controller [0c03]: Intel Corporation N10/ICH 7 Family USB2 EHCI > Controller [8086:27cc] (rev 02) > Subsystem: Acer Incorporated [ALI] Device [1025:019c] > Kernel driver in use: ehci_hcd > 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge > [8086:2448] (rev e2) > 00:1f.0 ISA bridge [0601]: Intel Corporation 82801GBM (ICH7-M) LPC Interface > Bridge [8086:27b9] (rev 02) > Subsystem: Acer Incorporated [ALI] Device [1025:019c] > 00:1f.2 SATA controller [0106]: Intel Corporation 82801GBM/GHM (ICH7-M > Family) SATA Controller [AHCI mode] [8086:27c5] (rev 02) > Subsystem: Acer Incorporated [ALI] Device [1025:019c] > Kernel driver in use: ahci > 00:1f.3 SMBus [0c05]: Intel Corporation N10/ICH 7 Family SMBus Controller > [8086:27da] (rev 02) > Subsystem: Acer Incorporated [ALI] Device [1025:019c] > Kernel driver in use: i801_smbus > 01:00.0 Network controller [0280]: Broadcom Corporation BCM4312 802.11b/g > LP-PHY [14e4:4315] (rev 01) > Subsystem: Foxconn International, Inc. Device [105b:e018] > Kernel driver in use: b43-pci-bridge > 03:00.0 Ethernet controller [0200]: Atheros Communications Inc. > AR8121/AR8113/AR8114 Gigabit or Fast Ethernet [1969:1026] (rev b0) > Subsystem: Acer Incorporated [ALI] Device [1025:019c] > Kernel driver in use: ATL1E Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot: [O] Detect network card: [O] Configure network: [O] - issue with wlan detected (see below nb 1) Detect CD: [O] Load installer modules: [O] Detect hard drives: [O] Partition hard drives: [O] Install base system: [O] Clock/timezone setup: [O] User/password setup: [O] Install tasks: [O] Install boot loader: [O] - small issue detected (see below nb 2) Overall install: [O] Comments/Problems: Installation was mostly successfully. Two small issues: 1. I have a fully automated installation with preseed. At installation with WLAN, i have the ESSID and the WPA-Key in the preseed file. Here is the content of the corresponding preseed file: > # Netcfg - wlan0 > d-i netcfg/choose_interface select wlan0 > > d-i netcfg/wireless_essid string xxx-essid > d-i netcfg/wireless_security_type select wpa > d-i netcfg/wireless_wpa string xxx-wlan-key > > d-i preseed/include string netcfg.preseed But the essid defined here is not used. Instead of using the defined essid, there is a list of all available networks shown. 2. This netbook has also a windows xp installed. After installation, windows xp is not shown in the grub menu. I have to execute update-grub at the installed Debian. After that, windows xp and the recovery partition for windows xp is shown in grub. If you need further informations, please let me know. Best regards Bernhard -- To UNSUBSCRIBE, email to debian-boot-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/5054200e.1000...@yahoo.de
