Your message dated Sun, 17 Jun 2012 22:44:29 +0200
with message-id <20120617204429.GA10051@localhost.localdomain>
and subject line Re: Bug#677933: Acknowledgement (installation-report: testing
image does not boot on QNAP TS-212 (armel) / stable works)
has caused the Debian Bug report #677933,
regarding installation-report: testing image does not boot on QNAP TS-212
(armel) / stable works
to be marked as done.
This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.
(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact ow...@bugs.debian.org
immediately.)
--
677933: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=677933
Debian Bug Tracking System
Contact ow...@bugs.debian.org with problems
--- Begin Message ---
Package: installation-reports
Version: 2.46
Severity: normal
Boot method: flash
Image version: testing/stable
Date: night 16.06.2012-17.06.2012
Machine: QNAP TS-212
Partitions: <df -Tl will do; the raw partition table is preferred>
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot: [E]
Detect network card: [ ]
Configure network: [ ]
Detect CD: [ ]
Load installer modules: [ ]
Detect hard drives: [ ]
Partition hard drives: [ ]
Install base system: [ ]
Clock/timezone setup: [ ]
User/password setup: [ ]
Install tasks: [ ]
Install boot loader: [ ]
Overall install: [ ]
Comments/Problems:
I was trying to install Debian on TS-212 using instructions here:
http://www.cyrius.com/debian/kirkwood/qnap/ts-219/
First I tried to use installer image from testing, but the device did not boot:
both disk LEDs were constantly on, there was some disk activity, but absolutely
no
network activity. I tried several times wating 10-20 minutes each time. I also
tried
to remove disks but this did not help. After this I used stable installer image
with
testing repository. The installation was sucessfull, with small problems: had
to remove
RAID devices manually, partman did not align partition correctly.
--
Please make sure that the hardware-summary log file, and any other
installation logs that you think would be useful are attached to this
report. Please compress large files using gzip.
Once you have filled out this report, mail it to sub...@bugs.debian.org.
==============================================
Installer lsb-release:
==============================================
DISTRIB_ID=Debian
DISTRIB_DESCRIPTION="Debian GNU/Linux installer"
DISTRIB_RELEASE="6.0 (squeeze) - installer build 20110106+squeeze4+b1"
X_INSTALLATION_MEDIUM=network-console
==============================================
Installer hardware-summary:
==============================================
uname -a: Linux debian 2.6.32-5-kirkwood #1 Sun May 6 16:57:51 UTC 2012
armv5tel GNU/Linux
usb-list:
usb-list: Bus 01 Device 01: Marvell Orion EHCI [1d6b:0002]
usb-list: Level 00 Parent 00 Port 00 Class 09(hub ) Subclass 00 Protocol 01
usb-list: Manufacturer: Linux 2.6.32-5-kirkwood ehci_hcd
usb-list: Interface 00: Class 09(hub ) Subclass 00 Protocol 00 Driver hub
usb-list:
usb-list: Bus 01 Device 02: USB2.0 Hub [05e3:0608]
usb-list: Level 01 Parent 01 Port 00 Class 09(hub ) Subclass 00 Protocol 01
usb-list: Interface 00: Class 09(hub ) Subclass 00 Protocol 00 Driver hub
lsmod: Module Size Used by
lsmod: raid1 19757 3
lsmod: dm_mod 56891 0
lsmod: md_mod 80506 3 raid1
lsmod: jfs 157227 0
lsmod: ext4 288593 1
lsmod: jbd2 64351 1 ext4
lsmod: ext3 111204 0
lsmod: jbd 37738 1 ext3
lsmod: btrfs 539502 0
lsmod: crc32c 2562 1
lsmod: libcrc32c 896 1 btrfs
lsmod: vfat 8152 0
lsmod: fat 43613 1 vfat
lsmod: ext2 55323 0
lsmod: mbcache 4860 3 ext4,ext3,ext2
lsmod: sd_mod 31344 8
lsmod: crc_t10dif 1106 1 sd_mod
lsmod: sata_mv 24398 6
lsmod: ehci_hcd 36525 0
lsmod: evdev 6582 0
lsmod: libata 137914 1 sata_mv
lsmod: usbcore 123103 2 ehci_hcd
lsmod: scsi_mod 124484 2 sd_mod,libata
lsmod: gpio_keys 3066 0
lsmod: mv643xx_eth 22558 0
lsmod: nls_base 5367 4 jfs,vfat,fat,usbcore
lsmod: libphy 14836 1 mv643xx_eth
lsmod: inet_lro 5060 1 mv643xx_eth
df: Filesystem 1K-blocks Used Available Use% Mounted on
df: tmpfs 127836 60 127776 0% /dev
df: /dev/md0 1031052 504120 474556 52% /target
df: /dev/md0 1031052 504120 474556 52% /dev/.static/dev
df: tmpfs 127836 60 127776 0% /target/dev
free: total used free shared buffers
free: Mem: 255676 182904 72772 0 17392
free: Swap: 524212 1124 523088
free: Total: 779888 184028 595860
/proc/cmdline: console=ttyS0,115200 root=/dev/ram initrd=0xa00000,0x900000
ramdisk=34816
/proc/cpuinfo: Processor : Feroceon 88FR131 rev 1 (v5l)
/proc/cpuinfo: BogoMIPS : 1199.30
/proc/cpuinfo: Features : swp half thumb fastmult edsp
/proc/cpuinfo: CPU implementer : 0x56
/proc/cpuinfo: CPU architecture: 5TE
/proc/cpuinfo: CPU variant : 0x2
/proc/cpuinfo: CPU part : 0x131
/proc/cpuinfo: CPU revision : 1
/proc/cpuinfo:
/proc/cpuinfo: Hardware : QNAP TS-119/TS-219
/proc/cpuinfo: Revision : 0000
/proc/cpuinfo: Serial : 0000000000000000
/proc/iomem: 00000000-0fffffff : System RAM
/proc/iomem: 00027000-00395fff : Kernel text
/proc/iomem: 003ac000-0043ddd3 : Kernel data
/proc/iomem: f1010300-f101030f : rtc-mv
/proc/iomem: f1010600-f10107ff : orion_spi.0
/proc/iomem: f1010600-f10107ff : orion_spi.0
/proc/iomem: f1011000-f101101f : mv64xxx_i2c.0
/proc/iomem: f1011000-f101101f : mv64xxx_i2c adapter
/proc/iomem: f1012000-f10120ff : serial8250.0
/proc/iomem: f1012000-f101201f : serial
/proc/iomem: f1012100-f10121ff : serial8250.1
/proc/iomem: f1012100-f101211f : serial
/proc/iomem: f1030000-f103ffff : regs
/proc/iomem: f1050000-f1050fff : orion-ehci.0
/proc/iomem: f1050000-f1050fff : ehci_hcd
/proc/iomem: f1060800-f10608ff : xor 0 low
/proc/iomem: f1060900-f10609ff : xor 1 low
/proc/iomem: f1060a00-f1060aff : xor 0 high
/proc/iomem: f1060b00-f1060bff : xor 1 high
/proc/iomem: f1072000-f1073fff : ge00 base
/proc/iomem: f1080000-f1084fff : sata base
/proc/iomem: f5000000-f50007ff : sram
/proc/interrupts: CPU0
/proc/interrupts: 1: 327497 orion_irq orion_tick
/proc/interrupts: 5: 2 orion_irq mv_xor.0
/proc/interrupts: 6: 2 orion_irq mv_xor.1
/proc/interrupts: 7: 2 orion_irq mv_xor.2
/proc/interrupts: 8: 2 orion_irq mv_xor.3
/proc/interrupts: 11: 176374 orion_irq eth0
/proc/interrupts: 19: 27 orion_irq ehci_hcd:usb1
/proc/interrupts: 21: 3482280 orion_irq sata_mv
/proc/interrupts: 29: 12717 orion_irq mv64xxx_i2c
/proc/interrupts: 33: 274 orion_irq serial
/proc/interrupts: 46: 36 orion_irq mv643xx_eth
/proc/interrupts: 79: 1 orion_gpio_irq USB Copy
/proc/interrupts: 80: 0 orion_gpio_irq Reset
/proc/interrupts: Err: 0
/proc/meminfo: MemTotal: 255676 kB
/proc/meminfo: MemFree: 72772 kB
/proc/meminfo: Buffers: 17392 kB
/proc/meminfo: Cached: 126452 kB
/proc/meminfo: SwapCached: 388 kB
/proc/meminfo: Active: 54584 kB
/proc/meminfo: Inactive: 82188 kB
/proc/meminfo: Active(anon): 704 kB
/proc/meminfo: Inactive(anon): 16872 kB
/proc/meminfo: Active(file): 53880 kB
/proc/meminfo: Inactive(file): 65316 kB
/proc/meminfo: Unevictable: 24588 kB
/proc/meminfo: Mlocked: 0 kB
/proc/meminfo: SwapTotal: 524212 kB
/proc/meminfo: SwapFree: 523088 kB
/proc/meminfo: Dirty: 2620 kB
/proc/meminfo: Writeback: 0 kB
/proc/meminfo: AnonPages: 17228 kB
/proc/meminfo: Mapped: 3040 kB
/proc/meminfo: Shmem: 60 kB
/proc/meminfo: Slab: 11236 kB
/proc/meminfo: SReclaimable: 8700 kB
/proc/meminfo: SUnreclaim: 2536 kB
/proc/meminfo: KernelStack: 560 kB
/proc/meminfo: PageTables: 380 kB
/proc/meminfo: NFS_Unstable: 0 kB
/proc/meminfo: Bounce: 0 kB
/proc/meminfo: WritebackTmp: 0 kB
/proc/meminfo: CommitLimit: 652048 kB
/proc/meminfo: Committed_AS: 24396 kB
/proc/meminfo: VmallocTotal: 753664 kB
/proc/meminfo: VmallocUsed: 2164 kB
/proc/meminfo: VmallocChunk: 747716 kB
/proc/bus/input/devices: I: Bus=0019 Vendor=0001 Product=0001 Version=0100
/proc/bus/input/devices: N: Name="gpio-keys"
/proc/bus/input/devices: P: Phys=gpio-keys/input0
/proc/bus/input/devices: S: Sysfs=/devices/platform/gpio-keys/input/input0
/proc/bus/input/devices: U: Uniq=
/proc/bus/input/devices: H: Handlers=kbd event0
/proc/bus/input/devices: B: EV=3
/proc/bus/input/devices: B: KEY=1000000 0 0 0 0 0 0 0 20 0 0 0 0
/proc/bus/input/devices:
-- System Information:
Debian Release: wheezy/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: armel (armv5tel)
Kernel: Linux 3.2.0-2-kirkwood
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
installation-report depends on no packages.
Versions of packages installation-report recommends:
ii pciutils 1:3.1.9-3
ii reportbug 6.3.1
installation-report suggests no packages.
-- no debconf information
--- End Message ---
--- Begin Message ---
Closing duplicate bug.
17 червня 2012 о 20:39 +0000 Debian Bug Tracking System написав(-ла):
> Thank you for filing a new Bug report with Debian.
>
> This is an automatically generated reply to let you know your message
> has been received.
>
> Your message is being forwarded to the package maintainers and other
> interested parties for their attention; they will reply in due course.
>
> Your message has been sent to the package maintainer(s):
> Debian Install Team <debian-boot@lists.debian.org>
>
> If you wish to submit further information on this problem, please
> send it to 677...@bugs.debian.org.
>
> Please do not send mail to ow...@bugs.debian.org unless you wish
> to report a problem with the Bug-tracking system.
>
> --
> 677933: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=677933
> Debian Bug Tracking System
> Contact ow...@bugs.debian.org with problems
signature.asc
Description: Digital signature
--- End Message ---
