Package: boot-floppies Version: 3.0.17 (udma100-ext3) While installing the udma100-ext3 flavour of 3.0.17 boot-floppies on a Toshiba Satellite Pro 4300, I ran into some problems with the PCMCIA support.
I configured PCMCIA support which worked fine (correct modules loaded etc.), I then went to configure the network which also went okay until at the end when it tried to reload the pcmcia modules. This failed. In the syslog, I got (rough transcription): | dbootstrap: ds: device or resource busy | dbootstrap: i82365: device or resource busy | dbootstrap: pcmcia_coure: device or resource busy | insmod: insmod: a module named pcmcia_core already exists | user.err dbootstrap: an error encountered while trying to load and configure the |pcmcia modules cat /proc/modules showed (again, rough transaction): | serial_cs 0 (unused) | 3c574_cs 0 (unused) | ds 0 [serial_cs 3c574_cs] | i82365 22704 2 | pcmcica_core 0 [serial_cs 3c574_cs ds i82365] I removed the modules byhand in the correct order and reran the 'configure pcmcia support' step which got me working networking. This is reproduceable (this is my second install since I didn't take notes first time round), and if you need more info, I can probably reinstall again to get more details if you tell me what you need. -- James -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
