Package: debian-installer
The main ERROR: After install the /dev/sda3 (ext3) will not automount)
-- I choose to reuse partitions and keep existing data -- I manually
cleaned out / (root) so there was no previous OpSys related files only
the data in non-OS dirs...
Severity: normal
Boot method: CD with expert Xfce Desktop
Image version: Debian 6 Squeeze/Sid
Date: Sep 6, 2010
-- System Information:
Debian Release: squeeze/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: i386 (i686)
Machine: E-Machines W6409
Processor: Intel 386 w/Hyperthreading
Memory: 1,5G (128MB allotted to graphics)
Partitions:
df -hT
Filesystem Type Size Used Avail Use% Mounted on
tmpfs tmpfs 695M 0 695M 0% /lib/init/rw
udev tmpfs 694M 216K 694M 1% /dev
tmpfs tmpfs 695M 0 695M 0% /dev/shm
rootfs rootfs 874G 564G 265G 69% /
cat /proc/partitions
major minor #blocks name
8 0 976762584 sda
8 1 31744408 sda1
8 2 2104515 sda2
8 3 942911077 sda3
8 16 976762584 sdb
8 17 31744408 sdb1
8 18 945015592 sdb2
lspci -nn && lspci -vnn
00:00.0 Host bridge [0600]: ATI Technologies Inc Radeon Xpress 200
Host Bridge [1002:5a33] (rev 01)
00:01.0 PCI bridge [0604]: ATI Technologies Inc RS480 PCI Bridge [1002:5a3f]
00:11.0 IDE interface [0101]: ATI Technologies Inc IXP SB400 Serial
ATA Controller [1002:437a] (rev 80)
00:12.0 IDE interface [0101]: ATI Technologies Inc IXP SB400 Serial
ATA Controller [1002:4379] (rev 80)
00:13.0 USB Controller [0c03]: ATI Technologies Inc IXP SB400 USB Host
Controller [1002:4374] (rev 80)
00:13.1 USB Controller [0c03]: ATI Technologies Inc IXP SB400 USB Host
Controller [1002:4375] (rev 80)
00:13.2 USB Controller [0c03]: ATI Technologies Inc IXP SB400 USB2
Host Controller [1002:4373] (rev 80)
00:14.0 SMBus [0c05]: ATI Technologies Inc IXP SB400 SMBus Controller
[1002:4372] (rev 82)
00:14.1 IDE interface [0101]: ATI Technologies Inc IXP SB400 IDE
Controller [1002:4376] (rev 80)
00:14.2 Audio device [0403]: ATI Technologies Inc IXP SB4x0 High
Definition Audio Controller [1002:437b] (rev 01)
00:14.3 ISA bridge [0601]: ATI Technologies Inc IXP SB400 PCI-ISA
Bridge [1002:4377] (rev 80)
00:14.4 PCI bridge [0604]: ATI Technologies Inc IXP SB400 PCI-PCI
Bridge [1002:4371] (rev 80)
01:05.0 VGA compatible controller [0300]: ATI Technologies Inc RC410
[Radeon Xpress 200] [1002:5a61]
02:02.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd.
RTL-8139/8139C/8139C+ [10ec:8139] (rev 10)
02:03.0 FireWire (IEEE 1394) [0c00]: VIA Technologies, Inc. VT6306/7/8
[Fire II(M)] IEEE 1394 OHCI Controller [1106:3044] (rev 46)
02:04.0 Communication controller [0780]: Conexant Systems, Inc. Device
[14f1:2f40]
00:00.0 Host bridge [0600]: ATI Technologies Inc Radeon Xpress 200
Host Bridge [1002:5a33] (rev 01)
Subsystem: Intel Corporation Device [8086:d601]
Flags: bus master, 66MHz, medium devsel, latency 64
00:01.0 PCI bridge [0604]: ATI Technologies Inc RS480 PCI Bridge
[1002:5a3f] (prog-if 00 [Normal decode])
Flags: bus master, 66MHz, medium devsel, latency 64
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: 80100000-801fffff
Prefetchable memory behind bridge: 60000000-7fffffff
Capabilities: [b0] Subsystem: ATI Technologies Inc RS480 PCI Bridge
[1002:5a3f]
00:11.0 IDE interface [0101]: ATI Technologies Inc IXP SB400 Serial
ATA Controller [1002:437a] (rev 80) (prog-if 8f [Master SecP SecO PriP
PriO])
Subsystem: Intel Corporation Device [8086:d601]
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 23
I/O ports at 3068 [size=8]
I/O ports at 3084 [size=4]
I/O ports at 3060 [size=8]
I/O ports at 3080 [size=4]
I/O ports at 3030 [size=16]
Memory at 80207600 (32-bit, non-prefetchable) [size=512]
[virtual] Expansion ROM at 58000000 [disabled] [size=512K]
Capabilities: [60] Power Management version 2
Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit-
Kernel driver in use: sata_sil
00:12.0 IDE interface [0101]: ATI Technologies Inc IXP SB400 Serial
ATA Controller [1002:4379] (rev 80) (prog-if 8f [Master SecP SecO PriP
PriO])
Subsystem: Intel Corporation Device [8086:d601]
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 22
I/O ports at 3058 [size=8]
I/O ports at 307c [size=4]
I/O ports at 3050 [size=8]
I/O ports at 3078 [size=4]
I/O ports at 3020 [size=16]
Memory at 80207400 (32-bit, non-prefetchable) [size=512]
[virtual] Expansion ROM at 58080000 [disabled] [size=512K]
Capabilities: [60] Power Management version 2
Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit-
Kernel driver in use: sata_sil
00:13.0 USB Controller [0c03]: ATI Technologies Inc IXP SB400 USB Host
Controller [1002:4374] (rev 80) (prog-if 10 [OHCI])
Subsystem: Intel Corporation Device [8086:d601]
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 19
Memory at 58100000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [d0] MSI: Enable- Count=1/1 Maskable- 64bit-
Kernel driver in use: ohci_hcd
00:13.1 USB Controller [0c03]: ATI Technologies Inc IXP SB400 USB Host
Controller [1002:4375] (rev 80) (prog-if 10 [OHCI])
Subsystem: Intel Corporation Device [8086:d601]
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 19
Memory at 58101000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:13.2 USB Controller [0c03]: ATI Technologies Inc IXP SB400 USB2
Host Controller [1002:4373] (rev 80) (prog-if 20 [EHCI])
Subsystem: Intel Corporation Device [8086:d601]
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 19
Memory at 58102000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [dc] Power Management version 2
Capabilities: [d0] MSI: Enable- Count=1/1 Maskable- 64bit-
Kernel driver in use: ehci_hcd
00:14.0 SMBus [0c05]: ATI Technologies Inc IXP SB400 SMBus Controller
[1002:4372] (rev 82)
Subsystem: Intel Corporation Device [8086:d601]
Flags: 66MHz, medium devsel
I/O ports at 3010 [size=16]
Memory at 80207000 (32-bit, non-prefetchable) [size=1K]
Kernel driver in use: piix4_smbus
00:14.1 IDE interface [0101]: ATI Technologies Inc IXP SB400 IDE
Controller [1002:4376] (rev 80) (prog-if 8a [Master SecP PriP])
Subsystem: Intel Corporation Device [8086:d601]
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 16
I/O ports at 01f0 [size=8]
I/O ports at 03f4 [size=1]
I/O ports at 0170 [size=8]
I/O ports at 0374 [size=1]
I/O ports at 3000 [size=16]
Capabilities: [70] MSI: Enable- Count=1/1 Maskable- 64bit-
Kernel driver in use: pata_atiixp
00:14.2 Audio device [0403]: ATI Technologies Inc IXP SB4x0 High
Definition Audio Controller [1002:437b] (rev 01)
Subsystem: Intel Corporation Device [8086:d601]
Flags: bus master, slow devsel, latency 64, IRQ 16
Memory at 80200000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 2
Capabilities: [60] MSI: Enable- Count=1/1 Maskable- 64bit+
Kernel driver in use: HDA Intel
00:14.3 ISA bridge [0601]: ATI Technologies Inc IXP SB400 PCI-ISA
Bridge [1002:4377] (rev 80)
Subsystem: Intel Corporation Device [8086:d601]
Flags: bus master, 66MHz, medium devsel, latency 0
00:14.4 PCI bridge [0604]: ATI Technologies Inc IXP SB400 PCI-PCI
Bridge [1002:4371] (rev 80) (prog-if 01 [Subtractive decode])
Flags: bus master, 66MHz, medium devsel, latency 64
Bus: primary=00, secondary=02, subordinate=02, sec-latency=64
I/O behind bridge: 00001000-00001fff
Memory behind bridge: 80000000-800fffff
01:05.0 VGA compatible controller [0300]: ATI Technologies Inc RC410
[Radeon Xpress 200] [1002:5a61] (prog-if 00 [VGA controller])
Subsystem: Intel Corporation Device [8086:d601]
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 17
Memory at 60000000 (32-bit, prefetchable) [size=256M]
I/O ports at 2000 [size=256]
Memory at 80100000 (32-bit, non-prefetchable) [size=64K]
Expansion ROM at 70000000 [disabled] [size=128K]
Capabilities: [50] Power Management version 2
Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit-
Kernel driver in use: radeon
02:02.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd.
RTL-8139/8139C/8139C+ [10ec:8139] (rev 10)
Subsystem: Intel Corporation Device [8086:d601]
Flags: bus master, medium devsel, latency 64, IRQ 21
I/O ports at 1000 [size=256]
Memory at 80010800 (32-bit, non-prefetchable) [size=256]
Capabilities: [50] Power Management version 2
Kernel driver in use: 8139too
02:03.0 FireWire (IEEE 1394) [0c00]: VIA Technologies, Inc. VT6306/7/8
[Fire II(M)] IEEE 1394 OHCI Controller [1106:3044] (rev 46) (prog-if
10 [OHCI])
Subsystem: VIA Technologies, Inc. VT6306/7/8 [Fire II(M)] IEEE 1394
OHCI Controller [1106:3044]
Flags: bus master, medium devsel, latency 64, IRQ 16
Memory at 80010000 (32-bit, non-prefetchable) [size=2K]
I/O ports at 1100 [size=128]
Capabilities: [50] Power Management version 2
Kernel driver in use: firewire_ohci
02:04.0 Communication controller [0780]: Conexant Systems, Inc. Device
[14f1:2f40]
Subsystem: Conexant Systems, Inc. Device [14f1:2000]
Flags: bus master, medium devsel, latency 0, IRQ 11
Memory at 80000000 (32-bit, non-prefetchable) [size=64K]
I/O ports at 1180 [size=8]
Capabilities: [40] Power Management version 2
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot: [O]
Detect network card: [O]
Configure network: [O]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Install base system: [O]
Clock/timezone setup: [O]
User/password setup: [O]
Install tasks: [O]
Install boot loader: [ O]
Overall install: [E]
Comments/Problems:
The main ERROR: After install the /dev/sda3 (ext3) will not automount)
-- I choose to reuse partitions and keep existing data -- I manually
cleaned out / (root) so there was no previous OpSys related files only
the data in non-OS dirs...
<Description of the install:
Over all a very smooth install; just no /data partition at the end
(mount point exists but doesn't mount.)
I tried installing it twice.
(I realize I can manually mount the partition but I feel strongly that
since I marked it specifically during installtion I'd expect the
Installer to do the mounting after rebooting -- should I just edit the
/etc/fstab or what? At present I see -
cat /etc/fstab
# UNCONFIGURED FSTAB FOR BASE SYSTEM
r...@winxp:/home/sysadmin# cat /proc/self/mountinfo
14 18 0:0 / /sys rw,nosuid,nodev,noexec,relatime - sysfs none rw
15 18 0:3 / /proc rw,nosuid,nodev,noexec,relatime - proc none rw
16 18 0:5 / /dev rw,relatime - devtmpfs none
rw,size=710056k,nr_inodes=177514,mode=755
17 16 0:11 / /dev/pts rw,nosuid,noexec,relatime - devpts none
rw,gid=5,mode=620,ptmxmode=000
18 1 8:18 / / rw,relatime - ext3
/dev/disk/by-uuid/435e5b28-e596-47a4-9f9c-f2f26faa356a
rw,errors=continue,user_xattr,acl,data=ordered
19 18 0:14 / /lib/init/rw rw,nosuid,relatime - tmpfs tmpfs rw,mode=755
21 16 0:16 / /dev/shm rw,nosuid,nodev,relatime - tmpfs tmpfs rw
22 14 0:17 / /sys/fs/fuse/connections rw,relatime - fusectl fusectl rw
23 15 0:18 / /proc/fs/nfsd rw,relatime - nfsd nfsd rw
r...@winxp:/home/sysadmin# cat /proc/self/mounts
rootfs / rootfs rw 0 0
none /sys sysfs rw,nosuid,nodev,noexec,relatime 0 0
none /proc proc rw,nosuid,nodev,noexec,relatime 0 0
none /dev devtmpfs rw,relatime,size=710056k,nr_inodes=177514,mode=755 0 0
none /dev/pts devpts rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000 0 0
/dev/disk/by-uuid/435e5b28-e596-47a4-9f9c-f2f26faa356a / ext3
rw,relatime,errors=continue,user_xattr,acl,data=ordered 0 0
tmpfs /lib/init/rw tmpfs rw,nosuid,relatime,mode=755 0 0
tmpfs /dev/shm tmpfs rw,nosuid,nodev,relatime 0 0
fusectl /sys/fs/fuse/connections fusectl rw,relatime 0 0
nfsd /proc/fs/nfsd nfsd rw,relatime 0 0
r...@winxp:/home/sysadmin# cat /proc/self/mountstats
device rootfs mounted on / with fstype rootfs
device none mounted on /sys with fstype sysfs
device none mounted on /proc with fstype proc
device none mounted on /dev with fstype devtmpfs
device none mounted on /dev/pts with fstype devpts
device /dev/disk/by-uuid/435e5b28-e596-47a4-9f9c-f2f26faa356a mounted
on / with fstype ext3
device tmpfs mounted on /lib/init/rw with fstype tmpfs
device tmpfs mounted on /dev/shm with fstype tmpfs
device fusectl mounted on /sys/fs/fuse/connections with fstype fusectl
device nfsd mounted on /proc/fs/nfsd with fstype nfsd
I heard a rumor there was an *old* way for /etc/fstab and a *new* way
for /etc/fstab -- apparently the new way is an empty /etc/fstab... So,
what do I change to get the partition to mount eveb with an empty
fstab?
Thx/Bill
--
To UNSUBSCRIBE, email to debian-boot-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Archive:
http://lists.debian.org/aanlktimkfxbhxaat0owhca7dmlfnu=a-ul1bqvpvp...@mail.gmail.com
