On 17 Jun 2014, at 09:49, Ian Campbell <i...@hellion.org.uk> wrote: > Hello, > > TL;DR: Please run the attached kirkwood-qnap script on your ARM based > QNAP systems as "./kirkwood-qnap --info" and report the results in this > thread along with the model/kind of your QNAP device (as precisely as > you can). The script does not need to be run as root and gathers > information about the hardware platform and kernel version only, it is > non-destructive (even if run without the --info, so don't worry). >
QNAP TS-121 Kernel: Linux wheeler 3.14-1-kirkwood #1 Debian 3.14.4-1 (2014-05-13) armv5tel GNU/Linux cpuinfo: Hardware : QNAP TS-119/TS-219 dt model: n/a PCI devices: 00:00.0 0600: 11ab:6282 (rev 01) 01:00.0 0600: 11ab:6282 (rev 01) 01:01.0 0c03: 1b6f:7023 (rev 01) PHY devices (/sys/bus/mdio_bus/devices/): orion-mdio-mii:00 Soc Bus: n/a kirkwood-qnap: machine: QNAP TS-119/TS-219 kirkwood-qnap: success: PCI => kirkwood-ts219-6282.dtb kirkwood-qnap: success: PHY => kirkwood-ts219-6282.dtb -- To UNSUBSCRIBE, email to debian-arm-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org Archive: https://lists.debian.org/835bf133-6120-42fa-b45d-9f4db2c2f...@corpex.de
