---- machine #1/3 (QNAP TS-419P+) ------- Kernel: Linux eternity 3.2.0-4-kirkwood #1 Debian 3.2.57-3+deb7u2 armv5tel GNU/Linux cpuinfo: Hardware : QNAP TS-41x dt model: n/a
PCI devices: 00:00.0 0600: 11ab:6282 00:01.0 0100: 11ab:7042 (rev 02) PHY devices (/sys/bus/mdio_bus/devices/): 0:00 0:01 Soc Bus: n/a QNAP TS-41x kirkwood-qnap: machine: QNAP TS-41x kirkwood-qnap: success: PCI => kirkwood-ts419-6282.dtb kirkwood-qnap: success: PHY => kirkwood-ts419-6282.dtb ---- machine #2/3 (QNAP TS-419P+) ------- Kernel: Linux serenity 3.2.0-4-kirkwood #1 Debian 3.2.57-3+deb7u2 armv5tel GNU/Linux cpuinfo: Hardware : QNAP TS-41x dt model: n/a PCI devices: 00:00.0 0600: 11ab:6282 00:01.0 0100: 11ab:7042 (rev 02) PHY devices (/sys/bus/mdio_bus/devices/): 0:00 0:01 Soc Bus: n/a QNAP TS-41x kirkwood-qnap: machine: QNAP TS-41x kirkwood-qnap: success: PCI => kirkwood-ts419-6282.dtb kirkwood-qnap: success: PHY => kirkwood-ts419-6282.dtb ---- machine #3/3 (QNAP TS-219P II) ------- Kernel: Linux chaos 3.2.0-4-kirkwood #1 Debian 3.2.57-3+deb7u2 armv5tel GNU/Linux cpuinfo: Hardware : QNAP TS-119/TS-219 dt model: n/a PCI devices: 00:00.0 0600: 11ab:6282 (rev 01) 00:01.0 0106: 197b:2363 (rev 03) 00:01.1 0101: 197b:2363 (rev 03) PHY devices (/sys/bus/mdio_bus/devices/): 0:00 Soc Bus: n/a QNAP TS-119/TS-219 kirkwood-qnap: machine: QNAP TS-119/TS-219 kirkwood-qnap: success: PCI => kirkwood-ts219-6282.dtb kirkwood-qnap: success: PHY => kirkwood-ts219-6282.dtb On Tue, Jun 17, 2014 at 08:49:21 +0100, Ian Campbell wrote: > Hello, > > TL;DR: Please run the attached kirkwood-qnap script on your ARM based > QNAP systems as "./kirkwood-qnap --info" and report the results in this > thread along with the model/kind of your QNAP device (as precisely as > you can). The script does not need to be run as root and gathers > information about the hardware platform and kernel version only, it is > non-destructive (even if run without the --info, so don't worry). > > Longer version: > > The upstream Linux kernel maintainers are in the process of switching > support for the kirkwood platform from the old "board file" mechanism to > device tree. This means we (Debian) need to plan for an upgrade path, > which mainly means teaching the flash-kernel tool about the DTBs and > telling it to use them with new kernels. The 3.15 kernel can boot in > either mode and I'd like to try and make the transition with that release. > > Unfortunately there is a slight wrinkle which is that each individual > board file actually supported systems based on two different SoC > variants which has resulted in 2 DTBs for each board file. We need to > figure out how to reliably detect which DTB is required even when > running on the Wheezy kernel etc. > > There are several possible mechanisms for detecting this, however due to > the vagaries of the different kernel versions which may be out there and > the variations in the systems themselves they aren't all necessarily > available all the time. > > Running the attached script and "./kirkwood-qnap --info" will gather > information about these various mechanisms so that I can build > confidence that it will work correctly everywhere. > > Just running this test on whichever systems you happen to have running > their current kernel in the existing configuration would be incredibly > valuable. However if you have qnap systems which you don't mind > rebooting (and can recover if a kernel upgrade goes wrong) then booting > with a few different kernels and running the script would be very useful > to see the results for any of: > * The stock Wheezy kernel > * The 3.15-rc8-kirkwood kernel currently in experimental, with > regular flash-kernel from sid or before. This will boot in > board-file mode. > * The 3.15-rc8-kirkwood kernel currently in experimental and the > flash-kernel from experimental (3.22~exp.1). This will boot in > DTB mode. > > Ian. > > Example output: > $ ./kirkwood-qnap --info > Kernel: Linux qnap 3.15-rc8-kirkwood #1 Debian 3.15~rc8-1~exp1 > (2014-06-03) armv5tel GNU/Linux > cpuinfo: Hardware : Marvell Kirkwood (Flattened Device Tree) > dt model: QNAP TS419 family > > PCI devices: > 00:01.0 0604: 11ab:6281 (rev 02) > 01:00.0 0100: 11ab:7042 (rev 02) > > PHY devices (/sys/bus/mdio_bus/devices/): > f1072004.mdio-bu:00 f1072004.mdio-bu:08 > > Soc Bus: n/a > > kirkwood-qnap: machine: QNAP TS419 family > kirkwood-qnap: success: PCI => kirkwood-ts419-6281.dtb > kirkwood-qnap: success: PHY => kirkwood-ts419-6281.dtb > -- To UNSUBSCRIBE, email to debian-arm-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org Archive: https://lists.debian.org/20140617082051.ga7...@noloop.net
